Resistor, Capacitor, and Impedance (Testing...)

WU HANQING — Thu, 29 Oct 2026 03:49:09 +0000

Introduction

This article systematically elaborates on the impedance characteristics and physical significance of resistors, capacitors, and inductors in alternating current (AC) circuits. Through phasor methods and frequency-domain analysis, the impedance formulas for these three components are derived, revealing the phase relationships between voltage and current as well as the patterns of energy variation. Furthermore, the mathematical expressions and frequency characteristics of resistance, capacitive reactance, and inductive reactance are compared and summarized. This facilitates an intuitive understanding of classic principles such as "passing AC while blocking DC" and "passing DC while blocking AC," providing a theoretical foundation for subsequent applications including filters, circuit resonance, and AC analysis.

1. Fundamental Concepts of Impedance

1.1 Definition

Impedance is a comprehensive term for the opposition that a circuit element presents to the flow of current in an AC circuit. It is the complex representation of resistance (energy dissipation) and reactance (energy storage and release).

1.2 Mathematical Representation

Impedance $Z$ is a complex number:

Z = R + j X

Where:

$R$ is the resistive component (real part), representing the dissipation of energy
$X$ is the reactive component (imaginary part), representing the storage and release of energy
$j$ is the imaginary unit (customarily denoted as $j$ rather than $i$ in electrical engineering)

1.3 Magnitude and Phase of Impedance

The magnitude (modulus) and phase angle of impedance are given by:

∣ Z ∣ = R^{2} + X^{2}

θ = arctan (\frac{X}{R})

2. Impedance of a Resistor

2.1 Time-Domain Characteristics

The voltage and current of a resistor follow Ohm's Law at any given instant:

v_{R} (t) = R \cdot i_{R} (t)

2.2 Derivation of Impedance

Assume the current flowing through the resistor is a sinusoidal wave:

i_{R} (t) = I_{m} sin (ω t)

According to Ohm's Law, the voltage across the resistor is:

v_{R} (t) = R \cdot i_{R} (t) = R \cdot I_{m} sin (ω t)

Using phasor analysis, let the current phasor be $I$ and the voltage phasor be $V_{R}$ :

V_{R} = R \cdot I

Therefore, the impedance of the resistor is:

Z_{R} = \frac{V _{R}}{I} = R

2.3 Conclusion

The impedance of a resistor is a purely real value:

Z_{R} = R

Characteristics:

Contains only a resistive component with no reactive component
Impedance is independent of frequency
Voltage and current are in phase

3. Impedance of a Capacitor

3.1 Time-Domain Characteristics

The fundamental characteristic equations for a capacitor are:

v_{C} (t) = \frac{1}{C} q (t) = \frac{1}{C} \int i_{C} (t) d t

i_{C} (t) = C \frac{d v _{C} ( t )}{d t}

3.2 Derivation of Impedance

Assume the voltage across the capacitor is a sinusoidal wave:

v_{C} (t) = V_{m} sin (ω t)

The current flowing through the capacitor is:

ParseError: KaTeX parse error: Undefined control sequence: \[ at position 80: …mega t)\right] \̲[̲10pt] &= C \cdo…

Using phasor derivation, let the voltage phasor be $V_{C}$ :

v_{C} (t) = V_{C} e^{jω t}

ParseError: KaTeX parse error: Undefined control sequence: \[ at position 73: …e^{j\omega t}) \̲[̲10pt] &= C \cdo…

The current phasor is:

I = jω C V_{C}

Thus, the impedance of the capacitor is:

Z_{C} = \frac{V _{C}}{I} = \frac{V _{C}}{jω C V _{C}} = \frac{1}{jω C}

Using the identity $\frac{1}{j} = - j$ , we obtain:

Z_{C} = - j \frac{1}{ω C}

3.3 Conclusion

The impedance of a capacitor is a purely imaginary value:

Z_{C} = \frac{1}{jω C} = - j \frac{1}{ω C}

Characteristics:

The magnitude of capacitive reactance is $X_{C} = \frac{1}{ω C}$
Impedance is inversely proportional to the frequency $ω$
Higher frequencies result in lower impedance (easier passage for high-frequency signals)
Lower frequencies result in higher impedance (greater opposition to low-frequency signals)
At DC ( $ω = 0$ ), impedance becomes infinite (open circuit)
The current phase leads the voltage phase by $9 0^{\circ}$

4. Impedance of an Inductor

4.1 Time-Domain Characteristics

The fundamental characteristic equation for an inductor is:

v_{L} (t) = L \frac{d i _{L} ( t )}{d t}

4.2 Derivation of Impedance

Assume the current flowing through the inductor is a sinusoidal wave:

i_{L} (t) = I_{m} sin (ω t)

The voltage across the inductor is:

ParseError: KaTeX parse error: Undefined control sequence: \[ at position 78: …ega t) \right] \̲[̲10pt] &= L \cdo…

Using phasor derivation, let the current phasor be $I$ :

i_{L} (t) = I e^{jω t}

ParseError: KaTeX parse error: Undefined control sequence: \[ at position 70: …e^{j\omega t}) \̲[̲10pt] &= L \cdo…

电压相量为：

V_{L} = jω L I

因此，电感的阻抗为：

Z_{L} = \frac{V _{L}}{I} = \frac{jω L I}{I} = jω L

4.3 Conclusion

The impedance of an inductor is a purely imaginary value:

Z_{L} = jω L

Characteristics:

The magnitude of inductive reactance is $X_{L} = ω L$
Impedance is directly proportional to the frequency $ω$
Higher frequencies result in higher impedance (greater opposition to high-frequency signals)
Lower frequencies result in lower impedance (easier passage for low-frequency signals)
At DC ( $ω = 0$ ), impedance is zero (short circuit)
The voltage phase leads the current phase by $9 0^{\circ}$

5. Summary and Comparison

5.1 Impedance Characteristics of the Three Elements

Component	Impedance Z	Reactance X	Voltage-Current Phase Relationship	Frequency Characteristics
Resistor	$Z_{R} = R$	$X_{R} = 0$	In Phase	Independent of Frequency
Capacitor	$Z_{C} = \frac{1}{jω C}$	$X_{C} = \frac{1}{ω C}$	Current Leads Voltage $9 0^{\circ}$	$f ↑, Z ↓$
Inductor	$Z_{L} = jω L$	$X_{L} = ω L$	Voltage Leads Current $9 0^{\circ}$	$f ↑, Z ↑$

5.2 Mnemonics

Capacitor: "Passes AC, Blocks DC", "Current Leads"
Inductor: "Passes DC, Blocks AC", "Voltage Leads"

5.3 Significance in Application

These fundamental impedance formulas serve as the cornerstones for analyzing AC circuits and designing filters. By applying them within the complex-number versions of circuit laws (Ohm's Law, Kirchhoff's Laws), one can systematically analyze frequency response, phase characteristics, and stability in complex circuits.

In filter design:

Capacitors are commonly utilized to bypass high-frequency signals
Inductors are commonly utilized to block high-frequency signals
Resistors are utilized to control gain and match impedance

These characteristics enable the design of various filter circuits that satisfy specific frequency response requirements.

Conclusion

Welcome to my personal webpage: wuhanqing.cn

Feel free to follow my WeChat Official Account: @Daniel的多线程日记

DEV Community: WU HANQING

Resistor, Capacitor, and Impedance (Testing...)

Introduction

1. Fundamental Concepts of Impedance

1.1 Definition

1.2 Mathematical Representation

1.3 Magnitude and Phase of Impedance

2. Impedance of a Resistor

2.1 Time-Domain Characteristics

2.2 Derivation of Impedance

2.3 Conclusion

3. Impedance of a Capacitor

3.1 Time-Domain Characteristics

3.2 Derivation of Impedance

3.3 Conclusion

4. Impedance of an Inductor

4.1 Time-Domain Characteristics

4.2 Derivation of Impedance

4.3 Conclusion

5. Summary and Comparison

5.1 Impedance Characteristics of the Three Elements

5.2 Mnemonics

5.3 Significance in Application

Conclusion