Installing Kubernetes using Kubeadm utility

Hadiru — Fri, 29 Nov 2024 16:02:07 +0000

This guide covers the step-by-step process of installing Kubernetes using the kubeadm utility. kubeadm is a tool recommended for bootstrapping a Kubernetes cluster. We will use 3 nodes: a master node and 2 worker nodes. The nodes will run on AWS EC2 instances with Ubuntu 20.04 LTS (t2.medium instance type, 8GB storage). You can use any cloud provider to launch the instances.

Prerequisites

Infrastructure Requirements:

Instance Type: t2.medium or better.
Storage: 8GB minimum.
Operating System: Ubuntu 20.04 LTS.
Network: Ensure all nodes are in the same VPC with required ports opened.

Tools:

SSH client (e.g., ssh or PuTTY).
curl, vi or nano (pre-installed in Ubuntu).

Required Ports: (Ensure these are allowed in the security group)

These ports are required for the Kubernetes cluster to work. Check the Kubernetes documentation for more information.

Master Node:

TCP: 6443 (Kubernetes API Server)
TCP: 2379-2380 (Etcd)
TCP: 10250 (Kube Scheduler)
TCP: 10257 (Kube Controller Manager)
TCP: 10250 (Kubelet API)
TCP: 22 (SSH)
ICMP: (Ping Connection)

Worker Nodes:

TCP: 10256 (Kube Proxy)
TCP: 30000-32767 (NodePort Services)
TCP: 10250 (Kubelet API)
TCP: 22 (SSH)
ICMP: (Ping Connection)

Step-by-Step Setup

1. Launch EC2 Instances

Configuration:
- Instance Type: t2.medium
- AMI: Ubuntu 20.04 LTS
- Storage: 8GB
- Key Pair: Create or use an existing one.
- Assign Public IP: Yes.
Result: Master and Worker Nodes

2. Connect to Instances and Set Hostnames

Setting a hostname ensures each node has a unique identifier, simplifying management and troubleshooting.

Master Node

ssh -i "key-pair-name.pem" ubuntu@master-node-ip
hostnamectl set-hostname master

Worker Nodes (worker-1, worker-2)

ssh -i "key-pair-name.pem" ubuntu@worker-node-ip
hostnamectl set-hostname worker-[1-2]

3. Test Node Connectivity

Verifies that the nodes can communicate with each other, which is essential for Kubernetes components to function correctly.

From Master Node

ping worker-1-ip
ping worker-2-ip

4. Disable Swap memory on all nodes

Kubernetes requires swap to be disabled to ensure proper memory allocation for containers.

Temporary (until reboot)

sudo swapoff -a

Permanent

sudo sed -i.bak '/ swap / s/^/#/' /etc/fstab

5. Enable Overlay and Bridge Filtering Modules

These kernel modules enable container network communication and ensure traffic routing works properly within the cluster. These settings allow the Kubernetes networking model to function correctly by enabling packet forwarding and bridge filtering.

cat <<EOF | sudo tee /etc/modules-load.d/k8s.conf
overlay
br_netfilter
EOF
sudo modprobe overlay
sudo modprobe br_netfilter
# sysctl params required by setup, params persist across reboots
cat <<EOF | sudo tee /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-iptables  = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.ipv4.ip_forward                 = 1
EOF

Apply sysctl params without reboot

sudo sysctl --system

Verify br_netfilter and overlay modules are loaded

lsmod | grep br_netfilter
lsmod | grep overlay
# Verify that the net.bridge.bridge-nf-call-iptables, net.bridge.bridge-nf-call-ip6tables, and net.ipv4.ip_forward system variables are set to 1 in your sysctl config by running the following command:
sysctl net.bridge.bridge-nf-call-iptables net.bridge.bridge-nf-call-ip6tables net.ipv4.ip_forward

6. Install Container Runtime (Containerd)

Downloads and extracts containerd, which is a lightweight and efficient container runtime for Kubernetes.

curl -LO https://github.com/containerd/containerd/releases/download/v2.0.0/containerd-2.0.0-linux-amd64.tar.gz
sudo tar Cxzvf /usr/local containerd-2.0.0-linux-amd64.tar.gz

Install containerd service file and generate default configurations

Donwloads and installs the containerd service file, which is responsible for managing the containerd runtime and generates a default configuration file for containerd.

curl -LO https://raw.githubusercontent.com/containerd/containerd/main/containerd.service
sudo mkdir -p /usr/local/lib/systemd/system/
sudo mv containerd.service /usr/local/lib/systemd/system/
sudo mkdir -p /etc/containerd
containerd config default | sudo tee /etc/containerd/config.toml

Set `SystemdCgroup` to true in runc.options

This configuration change enables the use of systemd cgroups for managing the resources and lifecycle of containers in the containerd runtime, which can potentially improve performance and reliability.

Open the /etc/containerd/ config.toml file using the vi text editor:

sudo vi /etc/containerd/config.toml

Navigate to the plugins.'io.containerd.cri.v1.runtime'.containerd.runtimes.runc.options section of the configuration file.
Add the following line to this section:
plugins.'io.containerd.cri.v1.runtime'.containerd.runtimes.runc.options

SystemdCgroup = true

Reload Systemd Daemon and Enable Containerd Service

Reloads systemd to recognize the containerd service and enables it to start automatically.

sudo systemctl daemon-reload
sudo systemctl enable --now containerd
sudo systemctl status containerd.service

Install Runc Runtime

Downloads and installs the runc runtime, a lightweight and efficient container runtime for Kubernetes. Runc is required by Containerd to manage and run containers based on OCI specifications.

curl -LO https://github.com/opencontainers/runc/releases/download/v1.2.2/runc.amd64
sudo install -m 755 runc.amd64 /usr/local/sbin/runc

Install Containerd Container Networking Interface (CNI)

Downloads and installs the CNI plugins, which are essential for container networking in Kubernetes. A CNI is required for container networking, allowing containers to communicate with each other and with external networks.

curl -LO https://github.com/containernetworking/plugins/releases/download/v1.6.0/cni-plugins-linux-amd64-v1.6.0.tgz
sudo mkdir -p /opt/cni/bin
sudo tar Cxzvf /opt/cni/bin cni-plugins-linux-amd64-v1.6.0.tgz

7. Install Kubeadm, Kubelet and Kubectl.

Installs Kubernetes tools like kubeadm, kubelet, and kubectl, which are essential for managing and deploying Kubernetes clusters.

sudo apt-get update
sudo apt-get install -y apt-transport-https ca-certificates curl gpg
curl -fsSL https://pkgs.k8s.io/core:/stable:/v1.31/deb/Release.key | sudo gpg --dearmor -o /etc/apt/keyrings/kubernetes-apt-keyring.gpg
echo 'deb [signed-by=/etc/apt/keyrings/kubernetes-apt-keyring.gpg] https://pkgs.k8s.io/core:/stable:/v1.31/deb/ /' | sudo tee /etc/apt/sources.list.d/kubernetes.list
sudo apt-get update
sudo apt-get install -y kubelet kubeadm kubectl
sudo apt-mark hold kubelet kubeadm kubectl

Verify Kubeadm, Kubelet and Kubectl

kubeadm version
kubelet --version
kubectl version --client

Configure Crictl to Work with Containerd

Configures crictl to communicate with containerd, which is the container runtime used by Kubernetes.

sudo crictl config runtime-endpoint unix:///var/run/containerd/containerd.sock

Configuring Kubernetes Kubelet with Kubeadm

Configures the Kubernetes Kubelet to work with Kubeadm, which is responsible for managing the cluster's nodes.

sudo bash -c "cat <<EOF > /var/lib/kubelet/config.yaml
# kubeadm-config.yaml
kind: ClusterConfiguration
apiVersion: kubeadm.k8s.io/v1beta4
kubernetesVersion: v1.21.0
---
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
cgroupDriver: systemd
EOF"

8. Setup Kubernetes Cluster

Bootstraps the master node, specifying the network CIDR and the API server's address.

Master Node

sudo kubeadm init --pod-network-cidr=192.168.0.0/16 --apiserver-advertise-address=<private_ip_of_master_node> --node-name master

Setup Kubectl for Regular User and List the Nodes

Configures kubectl to interact with the cluster.

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

kubectl get nodes

Install Calico CNI on Master Node

Deploys Calico as the network plugin for Kubernetes, enabling pod communication across the cluster.

kubectl create -f https://raw.githubusercontent.com/projectcalico/calico/v3.28.0/manifests/tigera-operator.yaml
curl -O https://raw.githubusercontent.com/projectcalico/calico/v3.28.0/manifests/custom-resources.yaml
kubectl apply -f custom-resources.yaml

Get All Pods

kubectl get pods -A

Generate a token for worker nodes and run the output command on worker nodes

kubeadm token create --print-join-command

Output should be similar to this:

kubeadm join 10.0.0.10:6443 --token <token> --discovery-token-ca-cert-hash sha256:<hash>

List all the nodes in the cluster

After successfully joining the worker nodes to the cluster, list the nodes in the cluster.

kubectl get nodes

9. Deploy an Nginx Pod and Expose it as a NodePort Service

Deploys a sample application (Nginx) and makes it accessible outside the cluster for testing.

kubectl run nginx --image=nginx --port=80
kubectl expose pod nginx --port=80 --target-port=80 --type=NodePort

Nginx Page in the Browser

Notes

Troubleshooting:
- Use kubectl describe node for node issues.
- Use kubectl logs for pod issues.
- Verify CNI installation using kubectl get pods -n kube-system.
Next Steps:
- Monitor the cluster using tools like Prometheus.
- Scale up the cluster with additional worker nodes.

Conclusion

Congratulations! 🎉 You've successfully deployed a Kubernetes cluster using kubeadm and set up a sample Nginx application to validate your setup. This guide has walked you through every step, from preparing your nodes to launching your first pod. With your Kubernetes cluster up and running, you're now ready to explore the endless possibilities it offers, from deploying scalable applications to experimenting with advanced concepts like autoscaling, monitoring, and service meshes.

DEV Community: Hadiru

[Boost]

Python Scripting: Automate Your Daily Tasks

0x3d Site ・ Mar 5

Installing Kubernetes using Kubeadm utility

Prerequisites

Infrastructure Requirements:

Tools:

Required Ports: (Ensure these are allowed in the security group)

Master Node:

Worker Nodes:

Step-by-Step Setup

1. Launch EC2 Instances

2. Connect to Instances and Set Hostnames

Master Node

Worker Nodes (worker-1, worker-2)

3. Test Node Connectivity

From Master Node

4. Disable Swap memory on all nodes

Temporary (until reboot)

Permanent

5. Enable Overlay and Bridge Filtering Modules

Apply sysctl params without reboot

Verify br_netfilter and overlay modules are loaded

6. Install Container Runtime (Containerd)

Install containerd service file and generate default configurations

Set SystemdCgroup to true in runc.options

Reload Systemd Daemon and Enable Containerd Service

Install Runc Runtime

Install Containerd Container Networking Interface (CNI)

7. Install Kubeadm, Kubelet and Kubectl.

Verify Kubeadm, Kubelet and Kubectl

Configure Crictl to Work with Containerd

Configuring Kubernetes Kubelet with Kubeadm

8. Setup Kubernetes Cluster

Master Node

Setup Kubectl for Regular User and List the Nodes

Install Calico CNI on Master Node

Get All Pods

Generate a token for worker nodes and run the output command on worker nodes

List all the nodes in the cluster

9. Deploy an Nginx Pod and Expose it as a NodePort Service

Nginx Page in the Browser

Notes

Conclusion

Set `SystemdCgroup` to true in runc.options