<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom" xmlns:dc="http://purl.org/dc/elements/1.1/">
  <channel>
    <title>DEV Community: Yang shanhe</title>
    <description>The latest articles on DEV Community by Yang shanhe (@ebikemanufacture123).</description>
    <link>https://dev.to/ebikemanufacture123</link>
    <image>
      <url>https://media2.dev.to/dynamic/image/width=90,height=90,fit=cover,gravity=auto,format=auto/https:%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Fuser%2Fprofile_image%2F4244460%2F4bce0115-3988-4bfe-90d6-ae6033d701da.jpg</url>
      <title>DEV Community: Yang shanhe</title>
      <link>https://dev.to/ebikemanufacture123</link>
    </image>
    <atom:link rel="self" type="application/rss+xml" href="https://dev.to/feed/ebikemanufacture123"/>
    <language>en</language>
    <item>
      <title>Coupling, Not Volume: What Actually Happens When You Deploy Dual-18 Subs in Pairs</title>
      <dc:creator>Yang shanhe</dc:creator>
      <pubDate>Tue, 17 Nov 2026 13:55:52 +0000</pubDate>
      <link>https://dev.to/ebikemanufacture123/coupling-not-volume-what-actually-happens-when-you-deploy-dual-18-subs-in-pairs-3628</link>
      <guid>https://dev.to/ebikemanufacture123/coupling-not-volume-what-actually-happens-when-you-deploy-dual-18-subs-in-pairs-3628</guid>
      <description>&lt;p&gt;Most arguments about subwoofers start and end with a peak SPL number on a spec sheet. In the field, the number that matters far less than the geometry you put the boxes in. I've spent enough nights walking a room with an SPL meter to know that two subs placed badly will lose to one sub placed well, every time.&lt;/p&gt;

&lt;p&gt;A quick bit of physics, because it explains everything else. Two coherent sources sum acoustically when they're within roughly a quarter wavelength of each other at the frequency of interest. At 60 Hz the wavelength is about 5.7 m, so a quarter wavelength is around 1.4 m. Put two subs side by side and you get real coupling in the low end — up to +6 dB in the coupled band, not the +3 dB you'd get from doubling amplifier power alone. Push them 3 or 4 metres apart and you start trading that coupling for lobing: a listener in the wrong seat hears a null where the bass should be. That's the whole reason sub arrays exist.&lt;/p&gt;

&lt;p&gt;I've been working with a batch of JBL VTX S28 dual-18 boxes that came out of a touring system, and they're a good concrete example of why the spec number is only half the story. The published figure is 141 dB peak, and people quote it like it's a continuous operating level. It isn't — it's a peak rating under specific conditions, at a specific distance, and real rooms eat it alive through power compression, boundary losses and amplifier limiting. What I actually care about is whether two cabinets couple predictably, and whether the transducers are healthy enough to do it repeatably.&lt;/p&gt;

&lt;p&gt;On the testing side, this is the routine I run on any used sub before it goes out on a job:&lt;/p&gt;

&lt;ol&gt;
&lt;li&gt;Free-air sweep at low level to listen for rub and buzz. A dragging voice coil is easy to hear and impossible to EQ out.&lt;/li&gt;
&lt;li&gt;Impedance sweep per driver if you have the tooling. A shifted Fs or a wildly different Re between the two 18s in a dual box tells you one has been reconed or is on its way out.&lt;/li&gt;
&lt;li&gt;Visual check of the surround, spider and cone sag. Cabinets stored on their side for years will sag.&lt;/li&gt;
&lt;li&gt;Gasket and grille check — a leaking cabinet loses more output than most people expect.&lt;/li&gt;
&lt;li&gt;Polarity and wiring verification before the box ever meets an amp.&lt;/li&gt;
&lt;/ol&gt;

&lt;p&gt;One honest caveat: these are used cabinets, graded B, which means cosmetic wear — scuffs, edge rash, the usual road miles. The grilles on this batch were refurbished and the transducers were checked, but that's not the same as new, and you should budget a proper bench test when they land rather than trusting the label. The units I looked at are 2017 vintage, and the unit I tested is listed here with photos: &lt;a href="https://proaudiotrade.com/products/jbl-vtx-s28/" rel="noopener noreferrer"&gt;https://proaudiotrade.com/products/jbl-vtx-s28/&lt;/a&gt; — the photos are worth studying if you're comparing wear across a batch.&lt;/p&gt;

&lt;p&gt;Where this gets practical: if you're deploying pairs for a cardioid array, remember the rear-facing box needs polarity inversion and delay, and the spacing between front and rear determines your cancellation band. Get it wrong and you've built a very expensive omni sub. Get it right and you get 15-20 dB of rear rejection, which is often worth more to a venue than any amount of extra output.&lt;/p&gt;

&lt;p&gt;Measure first, place second, and treat peak SPL as a ceiling rather than a target.&lt;/p&gt;

&lt;p&gt;Tags: audio, live-sound, subwoofers&lt;/p&gt;

&lt;p&gt;&lt;a href="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fc1sed4k5kvms9o96mvcw.jpg" class="article-body-image-wrapper"&gt;&lt;img src="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fc1sed4k5kvms9o96mvcw.jpg" alt=" " width="800" height="800"&gt;&lt;/a&gt;&lt;/p&gt;

</description>
      <category>hardware</category>
    </item>
    <item>
      <title>What 48V 20Ah Actually Tells You: Reading an E-Bike Battery Spec Sheet</title>
      <dc:creator>Yang shanhe</dc:creator>
      <pubDate>Tue, 17 Nov 2026 13:17:33 +0000</pubDate>
      <link>https://dev.to/ebikemanufacture123/what-48v-20ah-actually-tells-you-reading-an-e-bike-battery-spec-sheet-31ml</link>
      <guid>https://dev.to/ebikemanufacture123/what-48v-20ah-actually-tells-you-reading-an-e-bike-battery-spec-sheet-31ml</guid>
      <description>&lt;p&gt;Every spec sheet that lands on my desk gets the same treatment: convert the marketing numbers back into watt-hours before I read anything else. It takes thirty seconds and it usually tells you whether the range claim came out of engineering or out of a spreadsheet cell.&lt;/p&gt;

&lt;p&gt;The example I've been working through this month is a fat-tire model, the JIUYUE S2 20in Dual Battery. Headline numbers: 48V 500W brushless rear hub motor, 48V 20Ah lithium battery, 55 km pure electric, 70 km assisted, 45 km/h top speed, 31 kg, 150 kg max load.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;Start with watt-hours&lt;/strong&gt;&lt;/p&gt;

&lt;p&gt;48 V × 20 Ah = 960 Wh nominal. That is the only number on the page that isn't negotiable.&lt;/p&gt;

&lt;p&gt;Now divide by the claimed range: 960 / 55 ≈ 17.5 Wh/km. For a 31 kg bike rolling on 20×4.0 tires, that is a believable figure for a moderate rider in mild weather at mixed assist. It stops being believable at 5 °C, into a headwind, with a 100 kg rider holding full throttle. The useful comparison is against a narrower tire: fat tires cost roughly 15–25% in consumption at the same speed, which explains why two bikes with different pack sizes can quote similar ranges.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;The charge time tells you what charger is in the box&lt;/strong&gt;&lt;/p&gt;

&lt;p&gt;The sheet lists more than 12 hours to charge. Working backwards, 20 Ah of bulk charge in about 10 hours implies a charger in the 2 A class, plus a CV taper. That is a gentle charger: low heat, easy on cells, and unlikely to trip a shared 110 V circuit in an older building. The trade-off is turnaround — one full charge per night. Fine for commuters, wrong for anything shift-based.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;One naming caveat worth checking&lt;/strong&gt;&lt;/p&gt;

&lt;p&gt;The model name says Dual Battery, but the current sheet lists a single 48V 20Ah pack. That is not unusual; model names in this trade drift faster than spec sheets do. Still, confirm it with the factory before you print packaging or list a second pack in a catalogue.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;The motor is the easy part; the frame is not&lt;/strong&gt;&lt;/p&gt;

&lt;p&gt;A 500 W rear hub at 45 km/h is a conventional pairing and rarely where problems start. On a 20-inch fat bike, check axle nut torque, torque washers, and dropout condition on the magnesium alloy foldable frame. A folding frame puts real load through the hinge, and that hinge fails before the motor does if QC slips on a run.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;Container math is a density question&lt;/strong&gt;&lt;/p&gt;

&lt;p&gt;The factory quotes 220 pcs per 40HQ. Fat tires eat cube, so that number is low for the category. With MOQ at 20 units and 100 units in stock in Ningbo, an LCL trial is realistic before committing to a full container — which is what I would do on any new SKU where the spec sheet is my only data.&lt;/p&gt;

&lt;p&gt;If you want to check my arithmetic against the source, the factory spec sheet for the model I tested is here: &lt;a href="https://ebikefactory.shop/products/jy-s2-20-dual-battery/" rel="noopener noreferrer"&gt;https://ebikefactory.shop/products/jy-s2-20-dual-battery/&lt;/a&gt;&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;What goes on my incoming inspection sheet&lt;/strong&gt;&lt;/p&gt;

&lt;p&gt;BMS charge cut-off voltage measured against the charger's CV output, spoke tension on a 20×4.0 wheel, rotor alignment straight out of the box, hinge play after a few hundred fold cycles, and a measured capacity test on one pack per shipment rather than trusting the label.&lt;/p&gt;

&lt;p&gt;Tags: ebike, batteries, manufacturing&lt;/p&gt;

&lt;p&gt;&lt;a href="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fyk0pgmx5u02fi82vqxev.jpg" class="article-body-image-wrapper"&gt;&lt;img src="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fyk0pgmx5u02fi82vqxev.jpg" alt=" " width="800" height="651"&gt;&lt;/a&gt;&lt;/p&gt;

</description>
      <category>hardware</category>
    </item>
    <item>
      <title>Inspecting a Used Compact Line Array: Notes From a 2019 Meyer Sound LEOPARD</title>
      <dc:creator>Yang shanhe</dc:creator>
      <pubDate>Mon, 16 Nov 2026 14:31:37 +0000</pubDate>
      <link>https://dev.to/ebikemanufacture123/inspecting-a-used-compact-line-array-notes-from-a-2019-meyer-sound-leopard-2omk</link>
      <guid>https://dev.to/ebikemanufacture123/inspecting-a-used-compact-line-array-notes-from-a-2019-meyer-sound-leopard-2omk</guid>
      <description>&lt;p&gt;Most of the line arrays that pass through my hands are ex-rental, and ex-rental boxes tell you a lot if you know where to look. Last month I spent an afternoon going over a small set of Meyer Sound LEOPARD cabinets that came out of an installed corporate AV system, and the process makes a decent template for anyone evaluating compact arrays for a venue or a small rental inventory.&lt;/p&gt;

&lt;p&gt;What the box actually is&lt;/p&gt;

&lt;p&gt;The LEOPARD is a two-way compact array with two 10-inch LF drivers and a rated 135 dB peak. That number matters less than what it implies: this is a cabinet built to cover a corporate general session or a mid-size room without a truck full of boxes, and it does it with a forgiving vertical pattern when you keep the array short. Two per side is a common starting point. Four per side gets you into rooms where you'd otherwise be flying something much bigger.&lt;/p&gt;

&lt;p&gt;Inspection order&lt;/p&gt;

&lt;p&gt;I start with rigging, not sound. These cabinets were flown with MILO rigging hardware, which is a mixed blessing. It's well understood and spares exist, but it also means the frames and pins have been under static load for years. Look for bent pins, ovalised holes, and any frame that has been re-drilled. A box that has hung in a fixed install often has less cosmetic wear than a touring cabinet, but the rigging has been loaded continuously the whole time.&lt;/p&gt;

&lt;p&gt;Next: grille and foam. Backing that has gone sticky or crumbly is a cheap fix, but it tells you about the environment the box lived in. Then cones and surrounds, then a sweep.&lt;/p&gt;

&lt;p&gt;Electrical and acoustic checks&lt;/p&gt;

&lt;p&gt;Bring a measurement rig. An impedance sweep per band will show a dragging driver or a tired diaphragm long before it becomes audible as distortion. I also run a slow sine sweep at moderate level and listen for rattles in the enclosure and hardware, because installed boxes pick up loose fasteners from years of nearby HVAC vibration.&lt;/p&gt;

&lt;p&gt;The honest caveat&lt;/p&gt;

&lt;p&gt;Grade A means excellent used condition, not new. Expect scuffs on the cabinet edges and a grille that has been re-seated at least once. What you should not accept is a driver out of spec, mismatched HF diaphragms, or missing rigging components. Those are the things that turn a good-looking listing into a bad day.&lt;/p&gt;

&lt;p&gt;The set I went through is a 2019 build, eight units in stock with a two-cabinet minimum, and the unit I tested is listed here with photos: &lt;a href="https://proaudiotrade.com/products/meyer-leopard/" rel="noopener noreferrer"&gt;https://proaudiotrade.com/products/meyer-leopard/&lt;/a&gt;&lt;/p&gt;

&lt;p&gt;One last planning note: if you're starting with two cabinets, budget for the bumpers and the correct fly bars in the same order. A compact array without its rigging is a very heavy bookshelf.&lt;/p&gt;

&lt;p&gt;Tags: audio, livesound, proaudio&lt;/p&gt;

&lt;p&gt;&lt;a href="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fuuwmmbyygeo03vpz0eg0.jpg" class="article-body-image-wrapper"&gt;&lt;img src="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fuuwmmbyygeo03vpz0eg0.jpg" alt=" " width="800" height="401"&gt;&lt;/a&gt;&lt;/p&gt;

</description>
      <category>hardware</category>
      <category>production</category>
    </item>
    <item>
      <title>Folding Fat-Tire E-Bikes: What a 20in Spec Sheet Actually Tells You</title>
      <dc:creator>Yang shanhe</dc:creator>
      <pubDate>Mon, 16 Nov 2026 13:28:31 +0000</pubDate>
      <link>https://dev.to/ebikemanufacture123/folding-fat-tire-e-bikes-what-a-20in-spec-sheet-actually-tells-you-2pnb</link>
      <guid>https://dev.to/ebikemanufacture123/folding-fat-tire-e-bikes-what-a-20in-spec-sheet-actually-tells-you-2pnb</guid>
      <description>&lt;p&gt;Small-wheel fat-tire e-bikes are one of the harder categories to spec honestly, because the marketing copy and the engineering reality diverge fastest there. I spent some time with the sheet for a 2026 model from a Ningbo manufacturer — the JIUYUE S1 20in — and it is a good example of where to push back.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;The frame is the whole product&lt;/strong&gt;&lt;/p&gt;

&lt;p&gt;A foldable magnesium alloy frame is the defining choice here. Magnesium alloy castings are light and damp vibration well, and the S1 comes in at 28 kg, which is reasonable for a 20×4.0 fat-tire folder. The trade-off is that the hinge is now the most fatigue-critical part on the bike. When you inspect a shipment, check hinge play with the frame locked, look for paint cracking around the weld or casting transition, and confirm there is a secondary safety latch rather than a single quick-release. Also check how the cable bundle behaves through the fold — that is where wires chafe.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;Battery and consumption&lt;/strong&gt;&lt;/p&gt;

&lt;p&gt;48V 10.4Ah is 499.2 Wh. The claimed 30 km pure electric works out to about 16.6 Wh/km — noticeably higher consumption per kilometre than a 26in bike, which is exactly what you would expect: fat tires, more stop-start on a small-wheel platform, and a heavier rider-to-bike ratio. Treat the 30 km figure as a real-world mixed-riding number and the 40 km assisted figure as the same ride with your legs contributing. A 48V nominal pack is 13S, 54.6 V full charge; ask which cells and whether the BMS reports per-group voltages.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;Charger and controller questions&lt;/strong&gt;&lt;/p&gt;

&lt;p&gt;The stated charge time of &amp;gt;8 hours on a 499 Wh pack implies a modest charger, somewhere around 1.5–2 A. That is worth confirming explicitly, because the charger and the BMS charge-current limit have to agree. On the discharge side, 500 W at 48 V is about 10.4 A continuous; the controller will peak well above that, and the BMS needs headroom for it. Ask for both numbers.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;Small wheels, big tires, brake reality&lt;/strong&gt;&lt;/p&gt;

&lt;p&gt;20×4.0 tires with front and rear disc brakes and a 150 kg max load. The contact patch is large and the wheel is small, so brake modulation feels different from a 26in bike — grabby at low speed if the pads are not bedded in. Budget time to bed pads in on the first units you assemble, or your first customer complaints will be about brakes that are working correctly.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;Packing density is worse than you think&lt;/strong&gt;&lt;/p&gt;

&lt;p&gt;A 40HQ takes 220 pieces. Folded bikes look compact until you account for carton dimensions, handlebar packing and protection foam. At the 20-unit MOQ, plan LCL or a mixed container; the per-unit freight difference between 20 and 220 units is the single biggest variable in your landed cost.&lt;/p&gt;

&lt;p&gt;None of this is exotic engineering. It is just the difference between reading a spec sheet as a buyer and reading it as someone who will have to support the product after it lands.&lt;/p&gt;

&lt;p&gt;The full spec sheet for the model I went through is here: [&lt;a href="https://ebikefactory.shop/products/jy-s1-20/" rel="noopener noreferrer"&gt;https://ebikefactory.shop/products/jy-s1-20/&lt;/a&gt;]&lt;br&gt;
&lt;a href="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fwrxjlplhaqyrdg7rnxa5.jpg" class="article-body-image-wrapper"&gt;&lt;img src="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fwrxjlplhaqyrdg7rnxa5.jpg" alt=" " width="769" height="561"&gt;&lt;/a&gt;(&lt;a href="https://ebikefactory.shop/products/jy-s1-20/" rel="noopener noreferrer"&gt;https://ebikefactory.shop/products/jy-s1-20/&lt;/a&gt;)&lt;/p&gt;

&lt;p&gt;Tags: ebike, hardware, batteries&lt;/p&gt;

</description>
    </item>
    <item>
      <title>What 139 dB Peak Actually Means on a 2-Way Line Array Element</title>
      <dc:creator>Yang shanhe</dc:creator>
      <pubDate>Sun, 15 Nov 2026 12:12:17 +0000</pubDate>
      <link>https://dev.to/ebikemanufacture123/what-139-db-peak-actually-means-on-a-2-way-line-array-element-488b</link>
      <guid>https://dev.to/ebikemanufacture123/what-139-db-peak-actually-means-on-a-2-way-line-array-element-488b</guid>
      <description>&lt;p&gt;I keep seeing spec sheets where the headline number is peak SPL, and I keep watching people design arrays around it. So here's how I think about that number, using the boxes currently sitting in my shop as the concrete example.&lt;/p&gt;

&lt;h2&gt;
  
  
  Peak is not continuous, and neither is your program material
&lt;/h2&gt;

&lt;p&gt;A 2-way line array element rated at 139 dB peak is telling you something about headroom, not about how loud it will run all night. Peak figures assume a short transient, low crest factor, and a driver that hasn't been thermally beaten up. Music with heavy sub content and long sustained synth pads has a much higher crest factor than a snare hit, and your real usable output sits well below that peak number.&lt;/p&gt;

&lt;p&gt;When I plan a hang, I take the peak figure, subtract a conservative 12 to 15 dB of headroom for a clean mix, and then model coverage. If the math says I need more than that, I need more boxes, not more gain.&lt;/p&gt;

&lt;h2&gt;
  
  
  Why 2-way elements behave the way they do
&lt;/h2&gt;

&lt;p&gt;A 2-way element puts the low-mid and the high-frequency section through a shared waveguide and a relatively low crossover point. That buys you tight coupling between adjacent boxes in the vertical plane, which is exactly what you want when you're throwing 40 metres into a room with a balcony. The trade-off is that each individual box is doing a lot of work across a wide band, so array design matters more than box count.&lt;/p&gt;

&lt;p&gt;The units I've been handling are 2017 d&amp;amp;b audiotechnik Q7 elements, grade A used, out of a regional touring stock with factory service history. They're 2-way, they came with the original flying frames and pins, and the frames are the part I check first — a bent frame or a missing pin turns a straightforward hang into an afternoon.&lt;/p&gt;

&lt;h2&gt;
  
  
  Rigging is where used arrays earn or lose their grade
&lt;/h2&gt;

&lt;p&gt;Grade A means excellent used, not new. On a 2017 box that means you should expect a scuff or two on the enclosure and you should absolutely inspect the hardware yourself. I check pin fit, frame straightness, and the condition of the rigging points before anything goes in the air. Original frames and pins included is a real convenience — aftermarket frames are a compatibility headache.&lt;/p&gt;

&lt;p&gt;One practical note: these are sold with a minimum of four units, and that isn't arbitrary. A single element isn't an array. Four boxes gives you enough vertical control to actually shape coverage, and with 20 units available you can build a proper hang or a couple of smaller ones.&lt;/p&gt;

&lt;h2&gt;
  
  
  Testing before you commit
&lt;/h2&gt;

&lt;p&gt;Do a slow sine sweep on each box individually, then again in pairs, listening for diaphragm rub, rattle, and any asymmetry between neighbours. Check HF level consistency across the hang — a tired compression driver will show up as a dull box in an otherwise matched array, and it's much easier to catch on a bench than at 3 a.m. mid-show.&lt;/p&gt;

&lt;p&gt;For reference, the unit I tested is listed here with photos: &lt;a href="https://proaudiotrade.com/products/db-q7/" rel="noopener noreferrer"&gt;https://proaudiotrade.com/products/db-q7/&lt;/a&gt;&lt;/p&gt;

&lt;p&gt;None of this is exotic. It's just the difference between reading a peak SPL number and knowing what it will do for you on a Saturday night.&lt;/p&gt;

&lt;p&gt;Tags: audio, livesound, proaudio&lt;/p&gt;

&lt;p&gt;&lt;a href="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Flzjq13su96tczb3e0gwg.jpg" class="article-body-image-wrapper"&gt;&lt;img src="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Flzjq13su96tczb3e0gwg.jpg" alt=" " width="800" height="504"&gt;&lt;/a&gt;&lt;/p&gt;

</description>
    </item>
    <item>
      <title>Reading an e-bike battery spec sheet properly, using a 48V 13Ah fat-tire model as the example</title>
      <dc:creator>Yang shanhe</dc:creator>
      <pubDate>Sun, 15 Nov 2026 11:57:54 +0000</pubDate>
      <link>https://dev.to/ebikemanufacture123/reading-an-e-bike-battery-spec-sheet-properly-using-a-48v-13ah-fat-tire-model-as-the-example-57li</link>
      <guid>https://dev.to/ebikemanufacture123/reading-an-e-bike-battery-spec-sheet-properly-using-a-48v-13ah-fat-tire-model-as-the-example-57li</guid>
      <description>&lt;p&gt;Most spec sheets I get from suppliers stop at "48V 13Ah" and let the buyer figure out the rest. That is not enough to plan a container, and it is not enough to answer a dealer who asks how far the bike actually goes. Here is the order I read a sheet in now, using a model I have been going through recently, the JIUYUE EB00 26in, as the concrete example.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;Start with watt-hours, not amp-hours.&lt;/strong&gt;&lt;br&gt;
48V × 13Ah = 624 Wh nominal. That is the number that travels between models and between suppliers. Amp-hours on their own are meaningless without pack voltage, and marketing sheets love to quote the bigger-looking figure.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;Then divide by consumption.&lt;/strong&gt;&lt;br&gt;
The EB00 sheet claims 32 km pure electric and 45 km assisted. 624 Wh ÷ 32 km ≈ 19.5 Wh/km. That is plausible for a 32 kg bike on 26×4.0 tires with a 150 kg max load rating — fat tires and a high-carbon steel frame are heavy, so somewhere between 15 and 25 Wh/km is the honest band depending on rider weight, terrain, temperature and how much the rider pedals. If someone claims 60 km pure electric on a 624 Wh fat bike, they are quoting a test-rig number, not a road number.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;Charging time tells you what charger is in the box.&lt;/strong&gt;&lt;br&gt;
The sheet says more than 8 hours. On a 13Ah pack that implies roughly a 2A charger (13 ÷ 2 ≈ 6.5 h plus the CV taper). Slow charging is easier on cells, but it also means you should plan the charger as a line item and confirm its input voltage range for your market, not assume it.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;Motor and controller.&lt;/strong&gt;&lt;br&gt;
48V 500W brushless rear hub is about 10.4A continuous at nominal voltage. Ask what the controller is rated at peak and whether it is sine wave — that is where the ride quality and the heat live. Also ask about axle hardware: on a rear hub with a Shimano 7-speed drivetrain and disc brakes, the torque washer and dropout fit is the first thing I check, because that is where assembly mistakes show up on new stock.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;Frame and finish.&lt;/strong&gt;&lt;br&gt;
High-carbon steel is cheap and repairable, which matters for fleet buyers. What it does not tell you is paint adhesion at the welds. If you ship to coastal or salted-road markets, ask for the salt spray result before you commit to a batch.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;Container math.&lt;/strong&gt;&lt;br&gt;
40HQ = 180 pcs. Against a 20-unit MOQ, that means a test order is a partial load, and freight per unit only settles down as you approach a full box. Do that calculation before you compare unit prices, because it usually changes the ranking.&lt;/p&gt;

&lt;p&gt;Caveat: I have only handled these as new factory stock out of Ningbo, not as long-running fleet units, so my durability read is limited. Treat the range figures as planning numbers, not guarantees.&lt;/p&gt;

&lt;p&gt;The factory spec sheet for the model I used as the example is here: &lt;a href="https://ebikefactory.shop/products/jy-eb00-26/" rel="noopener noreferrer"&gt;https://ebikefactory.shop/products/jy-eb00-26/&lt;/a&gt;&lt;/p&gt;

&lt;p&gt;Tags: ebike, batteries, hardware, manufacturing&lt;/p&gt;

</description>
    </item>
  </channel>
</rss>
