<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom" xmlns:dc="http://purl.org/dc/elements/1.1/">
  <channel>
    <title>DEV Community: Go Gams</title>
    <description>The latest articles on DEV Community by Go Gams (@gamsgoworld).</description>
    <link>https://dev.to/gamsgoworld</link>
    <image>
      <url>https://media2.dev.to/dynamic/image/width=90,height=90,fit=cover,gravity=auto,format=auto/https:%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Fuser%2Fprofile_image%2F4215380%2Fcd22dcab-bfcb-41aa-94e4-5657ae1c8919.png</url>
      <title>DEV Community: Go Gams</title>
      <link>https://dev.to/gamsgoworld</link>
    </image>
    <atom:link rel="self" type="application/rss+xml" href="https://dev.to/feed/gamsgoworld"/>
    <language>en</language>
    <item>
      <title>Waiting for chamber heat before an ASA first layer, with a Klipper macro and a small Python check</title>
      <dc:creator>Go Gams</dc:creator>
      <pubDate>Wed, 11 Nov 2026 06:16:35 +0000</pubDate>
      <link>https://dev.to/gamsgoworld/waiting-for-chamber-heat-before-an-asa-first-layer-with-a-klipper-macro-and-a-small-python-check-j58</link>
      <guid>https://dev.to/gamsgoworld/waiting-for-chamber-heat-before-an-asa-first-layer-with-a-klipper-macro-and-a-small-python-check-j58</guid>
      <description>&lt;p&gt;Disclosure: this post contains affiliate links; I may earn a commission at no extra cost to you.&lt;/p&gt;

&lt;p&gt;ASA is less about heroic retraction settings and more about not starting the first layer while the chamber is still a cold box. I have not tuned ASA on a machine of my own for this article. The temperatures below are typical starting ranges from manufacturer sheets, and the code is a pattern you should adapt to your heater and sensor names, not a drop-in profile.&lt;/p&gt;

&lt;h2&gt;
  
  
  Why the first layer cares about chamber air
&lt;/h2&gt;

&lt;p&gt;ASA shrinks as it cools. If the bed is at 100°C but the cabinet is still near room temperature, the first few layers dump heat into a cold draft. Corners lift, the brim peels, and you spend the next hour blaming glue when the real problem was a start sequence that only waited on the bed.&lt;/p&gt;

&lt;p&gt;A closed door helps. An actively heated chamber that you can set, for example the 65°C chamber heat published for current QIDI enclosed models such as the &lt;a href="https://qidi3d.com/products/qidi-q2?sca_ref=12709201.UCHL5zC5pj" rel="noopener noreferrer"&gt;QIDI Q2&lt;/a&gt;, is a stronger tool because you can wait for a number instead of hoping the bed warms the air. On 11 November 2026 the global Q2 product page listed a $449 sale price against a $499 regular price. I have not printed on a Q2; that is a spec and a price, not a review.&lt;/p&gt;

&lt;p&gt;Typical starting points, always overridden by your filament sheet: nozzle around 240–260°C, bed around 90–110°C, chamber often 50–60°C if the printer can hold it, first-layer speed slower than later layers, little or no part cooling for the first several layers, and a brim on large footprints. Heatsoak matters. Give the bed and the cabinet time to stabilize after they &lt;em&gt;report&lt;/em&gt; the target.&lt;/p&gt;

&lt;h2&gt;
  
  
  A Klipper-style wait you can actually read
&lt;/h2&gt;

&lt;p&gt;Many printers already heat the bed in start G-code and then dive into &lt;code&gt;G28&lt;/code&gt;. Add an explicit chamber wait, with a timeout, so a failed heater does not sit there forever. Sensor names differ; on some machines the cabinet is &lt;code&gt;heater_generic chamber&lt;/code&gt;, on others a &lt;code&gt;temperature_sensor&lt;/code&gt;. Check &lt;code&gt;printer.heaters&lt;/code&gt; and your config before you paste.&lt;br&gt;
&lt;/p&gt;

&lt;div class="highlight js-code-highlight"&gt;
&lt;pre class="highlight plaintext"&gt;&lt;code&gt;[gcode_macro START_ASA_WAIT]
description: Heat bed and chamber, then wait with a timeout
gcode:
    {% set BED = params.BED|default(100)|float %}
    {% set CHAMBER = params.CHAMBER|default(55)|float %}
    {% set BED_MIN = BED - 1 %}
    {% set CH_MIN = CHAMBER - 2 %}
    M140 S{BED}
    SET_HEATER_TEMPERATURE HEATER=chamber TARGET={CHAMBER}
    M117 Waiting for bed and chamber
    TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={BED_MIN}
    TEMPERATURE_WAIT SENSOR=heater_generic chamber MINIMUM={CH_MIN}
    M117 Chamber ready, start first layer
&lt;/code&gt;&lt;/pre&gt;

&lt;/div&gt;



&lt;p&gt;If your firmware has no chamber heater, do not fake this macro. A &lt;code&gt;TEMPERATURE_WAIT&lt;/code&gt; on a missing heater will error, which is better than silently starting, but the useful fallback is a timed heatsoak after the bed is ready, with the door closed, plus a temperature sensor if you have one. The point is to refuse the first layer until the air is close to the target, not to decorate the start G-code.&lt;/p&gt;

&lt;p&gt;After the wait, keep the first layer boring: square the bed, use a clean PEI or other surface your ASA actually likes, and resist the urge to turn on a part-cooling fan to “sharpen” corners. Sharpening comes later. If a corner still lifts, check drafts around the door and the brim before you raise the bed another 10°C.&lt;/p&gt;

&lt;h2&gt;
  
  
  A small Python check against Moonraker
&lt;/h2&gt;

&lt;p&gt;If you start jobs from a script or from OctoPrint/Moonraker instead of the printer’s start macro alone, a few lines of Python can refuse to send the file until the chamber is warm enough. This talks to a local Moonraker API and exits non-zero if the wait times out.&lt;br&gt;
&lt;/p&gt;

&lt;div class="highlight js-code-highlight"&gt;
&lt;pre class="highlight python"&gt;&lt;code&gt;&lt;span class="k"&gt;import&lt;/span&gt; &lt;span class="n"&gt;sys&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="n"&gt;time&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="n"&gt;urllib&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="n"&gt;request&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="n"&gt;json&lt;/span&gt;

&lt;span class="no"&gt;HOST&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="s2"&gt;"http://127.0.0.1:7125"&lt;/span&gt;
&lt;span class="no"&gt;SENSOR&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="s2"&gt;"heater_generic chamber"&lt;/span&gt;
&lt;span class="no"&gt;TARGET&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="no"&gt;TOLERANCE&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="no"&gt;TIMEOUT&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="mf"&gt;55.0&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="mf"&gt;2.0&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="mi"&gt;900&lt;/span&gt;

&lt;span class="k"&gt;def&lt;/span&gt; &lt;span class="nf"&gt;chamber_temp&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt;
    &lt;span class="n"&gt;url&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="n"&gt;f&lt;/span&gt;&lt;span class="s2"&gt;"{HOST}/printer/objects/query?{SENSOR}"&lt;/span&gt;
    &lt;span class="k"&gt;with&lt;/span&gt; &lt;span class="n"&gt;urllib&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="n"&gt;request&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;urlopen&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;url&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="n"&gt;timeout&lt;/span&gt;&lt;span class="o"&gt;=&lt;/span&gt;&lt;span class="mi"&gt;5&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt; &lt;span class="k"&gt;as&lt;/span&gt; &lt;span class="n"&gt;r&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt;
        &lt;span class="n"&gt;obj&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="n"&gt;json&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;load&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;r&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;&lt;span class="p"&gt;[&lt;/span&gt;&lt;span class="s2"&gt;"result"&lt;/span&gt;&lt;span class="p"&gt;]&lt;/span&gt;&lt;span class="p"&gt;[&lt;/span&gt;&lt;span class="s2"&gt;"status"&lt;/span&gt;&lt;span class="p"&gt;]&lt;/span&gt;&lt;span class="p"&gt;[&lt;/span&gt;&lt;span class="no"&gt;SENSOR&lt;/span&gt;&lt;span class="p"&gt;]&lt;/span&gt;
    &lt;span class="k"&gt;return&lt;/span&gt; &lt;span class="kt"&gt;float&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;obj&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;get&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="s2"&gt;"temperature"&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt; &lt;span class="ow"&gt;or&lt;/span&gt; &lt;span class="n"&gt;obj&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;get&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="s2"&gt;"temp"&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;

&lt;span class="n"&gt;start&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="n"&gt;time&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;time&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
&lt;span class="k"&gt;while&lt;/span&gt; &lt;span class="kc"&gt;True&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt;
    &lt;span class="n"&gt;t&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="nf"&gt;chamber_temp&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
    &lt;span class="k"&gt;print&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;f&lt;/span&gt;&lt;span class="s2"&gt;"chamber {t:.1f} C, target {TARGET} C"&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
    &lt;span class="k"&gt;if&lt;/span&gt; &lt;span class="n"&gt;t&lt;/span&gt; &lt;span class="o"&gt;&amp;gt;=&lt;/span&gt; &lt;span class="no"&gt;TARGET&lt;/span&gt; &lt;span class="o"&gt;-&lt;/span&gt; &lt;span class="no"&gt;TOLERANCE&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt;
        &lt;span class="n"&gt;sys&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;exit&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="mi"&gt;0&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
    &lt;span class="k"&gt;if&lt;/span&gt; &lt;span class="n"&gt;time&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;time&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt; &lt;span class="o"&gt;-&lt;/span&gt; &lt;span class="n"&gt;start&lt;/span&gt; &lt;span class="o"&gt;&amp;gt;&lt;/span&gt; &lt;span class="no"&gt;TIMEOUT&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt;
        &lt;span class="k"&gt;print&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="s2"&gt;"timeout waiting for chamber"&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="n"&gt;file&lt;/span&gt;&lt;span class="o"&gt;=&lt;/span&gt;&lt;span class="n"&gt;sys&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="n"&gt;stderr&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
        &lt;span class="n"&gt;sys&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;exit&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="mi"&gt;1&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
    &lt;span class="n"&gt;time&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;sleep&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="mi"&gt;5&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
&lt;/code&gt;&lt;/pre&gt;

&lt;/div&gt;



&lt;p&gt;Wire it in front of your upload-and-start command. Combined with the macro, you get a belt-and-suspenders start: the host will not send the job early, and the printer will not slice into layer one early if the host check is skipped.&lt;/p&gt;

&lt;p&gt;The &lt;a href="https://qidi3d.com/products/plus5?sca_ref=12709201.UCHL5zC5pj" rel="noopener noreferrer"&gt;QIDI Plus5&lt;/a&gt; publishes the same 65°C chamber-heat class with a larger 320×320×300 mm volume, at $699 sale / $749 regular on that same date. Pick the volume you need; the wait logic does not change.&lt;/p&gt;

&lt;p&gt;Start the first ASA layer when the cabinet is actually at temperature, not when the bed first beeps. That single habit prevents more failed bricks than a new glue stick.&lt;/p&gt;

</description>
      <category>3dprinting</category>
      <category>maker</category>
      <category>python</category>
      <category>hardware</category>
    </item>
    <item>
      <title>Tracking 3D Printer Maintenance with a Simple Log and Script</title>
      <dc:creator>Go Gams</dc:creator>
      <pubDate>Tue, 10 Nov 2026 05:49:30 +0000</pubDate>
      <link>https://dev.to/gamsgoworld/tracking-3d-printer-maintenance-with-a-simple-log-and-script-2dpg</link>
      <guid>https://dev.to/gamsgoworld/tracking-3d-printer-maintenance-with-a-simple-log-and-script-2dpg</guid>
      <description>&lt;p&gt;Disclosure: this article contains an affiliate link; I may earn a commission at no extra cost to you.&lt;/p&gt;

&lt;p&gt;FDM printers accumulate small jobs the same way cars do: nozzles wear, belts loosen, grease dries, and PTFE or cutter parts get replaced on a schedule you will not remember if it only lives in your head. You do not need a CMMS. A dated log plus a short script that tells you what is overdue is enough for a home or shop bench.&lt;/p&gt;

&lt;p&gt;I have not instrumented a particular brand for this write-up. The habit works on any machine you already own.&lt;/p&gt;

&lt;h2&gt;
  
  
  What belongs in the log
&lt;/h2&gt;

&lt;p&gt;Keep one append-only record per printer. A CSV is easy to grep and easy to version in git. Suggested columns:&lt;/p&gt;

&lt;ul&gt;
&lt;li&gt;
&lt;code&gt;date&lt;/code&gt; — ISO date of the event&lt;/li&gt;
&lt;li&gt;
&lt;code&gt;printer&lt;/code&gt; — a short name, not a serial you will typo&lt;/li&gt;
&lt;li&gt;
&lt;code&gt;event&lt;/code&gt; — &lt;code&gt;print_hours&lt;/code&gt;, &lt;code&gt;nozzle_change&lt;/code&gt;, &lt;code&gt;belt_check&lt;/code&gt;, &lt;code&gt;lube&lt;/code&gt;, &lt;code&gt;filter&lt;/code&gt;, &lt;code&gt;other&lt;/code&gt;
&lt;/li&gt;
&lt;li&gt;
&lt;code&gt;hours&lt;/code&gt; — hours added this session, or blank for a parts event&lt;/li&gt;
&lt;li&gt;
&lt;code&gt;note&lt;/code&gt; — nozzle size, belt tension, or a short reason&lt;/li&gt;
&lt;/ul&gt;

&lt;p&gt;Print hours can be a conservative estimate from your slicer or a firmware print-stats readout if you trust it. The point is consistency, not laboratory precision.&lt;/p&gt;

&lt;p&gt;Write a line &lt;strong&gt;when you finish a maintenance task&lt;/strong&gt;, not “sometime this month.” A log that is three weeks late is just a diary of guilt.&lt;/p&gt;

&lt;h2&gt;
  
  
  A small script that flags overdue work
&lt;/h2&gt;

&lt;p&gt;Save the CSV as &lt;code&gt;maintenance.csv&lt;/code&gt; and run the script below from the same folder. Adjust the hour intervals to match your machine and filament mix. Abrasive carbon-fiber work usually shortens a nozzle interval; PLA on a brass nozzle can go longer. Official wear parts and filter-change guidance, if your manufacturer publishes them, should override these placeholders.&lt;br&gt;
&lt;/p&gt;

&lt;div class="highlight js-code-highlight"&gt;
&lt;pre class="highlight python"&gt;&lt;code&gt;&lt;span class="c1"&gt;#!/usr/bin/env python3&lt;/span&gt;
&lt;span class="s2"&gt;"""Flag overdue 3D printer maintenance from a simple CSV log."""&lt;/span&gt;
&lt;span class="k"&gt;import&lt;/span&gt; &lt;span class="n"&gt;csv&lt;/span&gt;
&lt;span class="k"&gt;from&lt;/span&gt; &lt;span class="n"&gt;collections&lt;/span&gt; &lt;span class="k"&gt;import&lt;/span&gt; &lt;span class="n"&gt;defaultdict&lt;/span&gt;
&lt;span class="k"&gt;from&lt;/span&gt; &lt;span class="n"&gt;datetime&lt;/span&gt; &lt;span class="k"&gt;import&lt;/span&gt; &lt;span class="n"&gt;date&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="n"&gt;datetime&lt;/span&gt;
&lt;span class="k"&gt;from&lt;/span&gt; &lt;span class="n"&gt;pathlib&lt;/span&gt; &lt;span class="k"&gt;import&lt;/span&gt; &lt;span class="nc"&gt;Path&lt;/span&gt;

&lt;span class="no"&gt;LOG&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="nc"&gt;Path&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="s2"&gt;"maintenance.csv"&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
&lt;span class="c1"&gt;# Hours between recurring jobs. Tune per printer and materials.&lt;/span&gt;
&lt;span class="no"&gt;INTERVALS&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="p"&gt;{&lt;/span&gt;
    &lt;span class="s2"&gt;"nozzle_change"&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt; &lt;span class="mi"&gt;150&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt;
    &lt;span class="s2"&gt;"belt_check"&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt; &lt;span class="mi"&gt;100&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt;
    &lt;span class="s2"&gt;"lube"&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt; &lt;span class="mi"&gt;200&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt;
    &lt;span class="s2"&gt;"filter"&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt; &lt;span class="mi"&gt;300&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt;
&lt;span class="p"&gt;}&lt;/span&gt;

&lt;span class="k"&gt;def&lt;/span&gt; &lt;span class="nf"&gt;load_rows&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;path&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt; &lt;span class="nc"&gt;Path&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt;
    &lt;span class="k"&gt;with&lt;/span&gt; &lt;span class="n"&gt;path&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nb"&gt;open&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;newline&lt;/span&gt;&lt;span class="o"&gt;=&lt;/span&gt;&lt;span class="s2"&gt;""&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="n"&gt;encoding&lt;/span&gt;&lt;span class="o"&gt;=&lt;/span&gt;&lt;span class="s2"&gt;"utf-8"&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt; &lt;span class="k"&gt;as&lt;/span&gt; &lt;span class="n"&gt;f&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt;
        &lt;span class="k"&gt;return&lt;/span&gt; &lt;span class="kt"&gt;list&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;csv&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nc"&gt;DictReader&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;f&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;

&lt;span class="k"&gt;def&lt;/span&gt; &lt;span class="nf"&gt;main&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt;
    &lt;span class="n"&gt;rows&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="nf"&gt;load_rows&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="no"&gt;LOG&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
    &lt;span class="n"&gt;hours&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="nf"&gt;defaultdict&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="kt"&gt;float&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
    &lt;span class="n"&gt;last_event&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="p"&gt;{&lt;/span&gt;&lt;span class="p"&gt;}&lt;/span&gt;  &lt;span class="c1"&gt;# (printer, event) -&amp;gt; (date, hours_then)&lt;/span&gt;

    &lt;span class="n"&gt;running&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="nf"&gt;defaultdict&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="kt"&gt;float&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
    &lt;span class="k"&gt;for&lt;/span&gt; &lt;span class="n"&gt;row&lt;/span&gt; &lt;span class="k"&gt;in&lt;/span&gt; &lt;span class="n"&gt;rows&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt;
        &lt;span class="n"&gt;p&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="n"&gt;row&lt;/span&gt;&lt;span class="p"&gt;[&lt;/span&gt;&lt;span class="s2"&gt;"printer"&lt;/span&gt;&lt;span class="p"&gt;]&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;strip&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
        &lt;span class="n"&gt;ev&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="n"&gt;row&lt;/span&gt;&lt;span class="p"&gt;[&lt;/span&gt;&lt;span class="s2"&gt;"event"&lt;/span&gt;&lt;span class="p"&gt;]&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;strip&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
        &lt;span class="n"&gt;d&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="n"&gt;datetime&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;strptime&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;row&lt;/span&gt;&lt;span class="p"&gt;[&lt;/span&gt;&lt;span class="s2"&gt;"date"&lt;/span&gt;&lt;span class="p"&gt;]&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;strip&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="s2"&gt;"%Y-%m-%d"&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;date&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
        &lt;span class="n"&gt;extra&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="kt"&gt;float&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;row&lt;/span&gt;&lt;span class="p"&gt;[&lt;/span&gt;&lt;span class="s2"&gt;"hours"&lt;/span&gt;&lt;span class="p"&gt;]&lt;/span&gt; &lt;span class="ow"&gt;or&lt;/span&gt; &lt;span class="mi"&gt;0&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
        &lt;span class="n"&gt;running&lt;/span&gt;&lt;span class="p"&gt;[&lt;/span&gt;&lt;span class="n"&gt;p&lt;/span&gt;&lt;span class="p"&gt;]&lt;/span&gt; &lt;span class="o"&gt;+=&lt;/span&gt; &lt;span class="n"&gt;extra&lt;/span&gt;
        &lt;span class="n"&gt;hours&lt;/span&gt;&lt;span class="p"&gt;[&lt;/span&gt;&lt;span class="n"&gt;p&lt;/span&gt;&lt;span class="p"&gt;]&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="n"&gt;running&lt;/span&gt;&lt;span class="p"&gt;[&lt;/span&gt;&lt;span class="n"&gt;p&lt;/span&gt;&lt;span class="p"&gt;]&lt;/span&gt;
        &lt;span class="n"&gt;last_event&lt;/span&gt;&lt;span class="p"&gt;[&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;p&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="n"&gt;ev&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;&lt;span class="p"&gt;]&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;d&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="n"&gt;running&lt;/span&gt;&lt;span class="p"&gt;[&lt;/span&gt;&lt;span class="n"&gt;p&lt;/span&gt;&lt;span class="p"&gt;]&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;

    &lt;span class="n"&gt;today&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="n"&gt;date&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;today&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
    &lt;span class="k"&gt;for&lt;/span&gt; &lt;span class="n"&gt;printer&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="n"&gt;total&lt;/span&gt; &lt;span class="k"&gt;in&lt;/span&gt; &lt;span class="nb"&gt;sorted&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;hours&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;items&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt;
        &lt;span class="k"&gt;print&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;f&lt;/span&gt;&lt;span class="s2"&gt;"{printer}: {total:.1f} recorded hours"&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
        &lt;span class="k"&gt;for&lt;/span&gt; &lt;span class="n"&gt;ev&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="n"&gt;every&lt;/span&gt; &lt;span class="k"&gt;in&lt;/span&gt; &lt;span class="no"&gt;INTERVALS&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="nf"&gt;items&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt;
            &lt;span class="n"&gt;key&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;printer&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="n"&gt;ev&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
            &lt;span class="k"&gt;if&lt;/span&gt; &lt;span class="n"&gt;key&lt;/span&gt; &lt;span class="ow"&gt;not&lt;/span&gt; &lt;span class="k"&gt;in&lt;/span&gt; &lt;span class="n"&gt;last_event&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt;
                &lt;span class="k"&gt;print&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;f&lt;/span&gt;&lt;span class="s2"&gt;"  missing: no '{ev}' entry yet (every {every} h)"&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
                &lt;span class="k"&gt;continue&lt;/span&gt;
            &lt;span class="n"&gt;when&lt;/span&gt;&lt;span class="p"&gt;,&lt;/span&gt; &lt;span class="n"&gt;hours_then&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="n"&gt;last_event&lt;/span&gt;&lt;span class="p"&gt;[&lt;/span&gt;&lt;span class="n"&gt;key&lt;/span&gt;&lt;span class="p"&gt;]&lt;/span&gt;
            &lt;span class="n"&gt;due_in&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="n"&gt;every&lt;/span&gt; &lt;span class="o"&gt;-&lt;/span&gt; &lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;total&lt;/span&gt; &lt;span class="o"&gt;-&lt;/span&gt; &lt;span class="n"&gt;hours_then&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
            &lt;span class="n"&gt;age&lt;/span&gt; &lt;span class="o"&gt;=&lt;/span&gt; &lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;today&lt;/span&gt; &lt;span class="o"&gt;-&lt;/span&gt; &lt;span class="n"&gt;when&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;&lt;span class="p"&gt;.&lt;/span&gt;&lt;span class="n"&gt;days&lt;/span&gt;
            &lt;span class="k"&gt;if&lt;/span&gt; &lt;span class="n"&gt;due_in&lt;/span&gt; &lt;span class="o"&gt;&amp;lt;=&lt;/span&gt; &lt;span class="mi"&gt;0&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt;
                &lt;span class="k"&gt;print&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;f&lt;/span&gt;&lt;span class="s2"&gt;"  OVERDUE: {ev} ({-due_in:.1f} h over, last {when})"&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
            &lt;span class="k"&gt;else&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt;
                &lt;span class="k"&gt;print&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="n"&gt;f&lt;/span&gt;&lt;span class="s2"&gt;"  {ev}: ok for ~{due_in:.1f} h (last {when}, {age} days ago)"&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;

&lt;span class="k"&gt;if&lt;/span&gt; &lt;span class="n"&gt;__name__&lt;/span&gt; &lt;span class="o"&gt;==&lt;/span&gt; &lt;span class="s2"&gt;"__main__"&lt;/span&gt;&lt;span class="p"&gt;:&lt;/span&gt;
    &lt;span class="nf"&gt;main&lt;/span&gt;&lt;span class="p"&gt;(&lt;/span&gt;&lt;span class="p"&gt;)&lt;/span&gt;
&lt;/code&gt;&lt;/pre&gt;

&lt;/div&gt;



&lt;p&gt;A starter log can be as small as:&lt;br&gt;
&lt;/p&gt;

&lt;div class="highlight js-code-highlight"&gt;
&lt;pre class="highlight plaintext"&gt;&lt;code&gt;date,printer,event,hours,note
2026-11-01,workshop-q,print_hours,12,PETG batch
2026-11-01,workshop-q,nozzle_change,,new 0.4 bimetal
2026-11-08,workshop-q,print_hours,8,nylon dry-box test
&lt;/code&gt;&lt;/pre&gt;

&lt;/div&gt;



&lt;p&gt;The script only knows what you typed. If you skip &lt;code&gt;print_hours&lt;/code&gt; for a week, every interval looks healthier than it is. If you log estimated slicer times and your printer actually ran slower, you will get an earlier warning, which is the safer error. Optional extras, if you outgrow the CSV, are a second column for filament type or a yearly archive file so the main log stays short.&lt;/p&gt;

&lt;h2&gt;
  
  
  How to use it without making a second job out of it
&lt;/h2&gt;

&lt;ul&gt;
&lt;li&gt;Add a &lt;code&gt;print_hours&lt;/code&gt; line when you clear a job off the bed, or once a day if you batch.&lt;/li&gt;
&lt;li&gt;After a nozzle swap, belt tension check, rail lubrication, or filter change, add the matching event with an empty &lt;code&gt;hours&lt;/code&gt; field.&lt;/li&gt;
&lt;li&gt;Run the script before a long unattended print. If a nozzle change is overdue and you are about to start a fiber-filled part, stop and swap first.&lt;/li&gt;
&lt;li&gt;Keep official spare-part lists nearby so the log points at real intervals, not folklore.&lt;/li&gt;
&lt;/ul&gt;

&lt;p&gt;If you are comparing enclosed machines while you set up a bench process, official current models are listed on &lt;a href="https://qidi3d.com?sca_ref=12709201.UCHL5zC5pj" rel="noopener noreferrer"&gt;QIDI’s store&lt;/a&gt;. I also collected notes on hardened nozzles and carbon-fiber filament here: &lt;a href="https://3dprofessorsworld.wordpress.com/2026/11/10/hardened-steel-nozzle-carbon-fiber-filaments/" rel="noopener noreferrer"&gt;Hardened nozzles and CF filament&lt;/a&gt;.&lt;/p&gt;

&lt;p&gt;A maintenance log will not make a printer last forever. It will keep you from discovering a worn nozzle in the last hour of a 20-hour job, which is usually when you notice it without a record.&lt;/p&gt;

</description>
      <category>3dprinting</category>
      <category>python</category>
      <category>productivity</category>
      <category>beginners</category>
    </item>
    <item>
      <title>A spreadsheet approach to estimating 3D print cost</title>
      <dc:creator>Go Gams</dc:creator>
      <pubDate>Tue, 10 Nov 2026 05:19:32 +0000</pubDate>
      <link>https://dev.to/gamsgoworld/a-spreadsheet-approach-to-estimating-3d-print-cost-3inl</link>
      <guid>https://dev.to/gamsgoworld/a-spreadsheet-approach-to-estimating-3d-print-cost-3inl</guid>
      <description>&lt;p&gt;People remember the printer’s street price and forget the cost of a finished part. A simple spreadsheet will not make you a contract manufacturer, but it will stop a “cheap” hobby from surprising you after a month of failed skirts and over-dried assumptions.&lt;/p&gt;

&lt;p&gt;I have not run a production cost study on these machines. The model below uses inputs you can fill from a slicer estimate, a receipt, and your electricity tariff—not invented shop rates.&lt;/p&gt;

&lt;p&gt;Disclosure: this article contains an affiliate link; I may earn a commission at no extra cost to you.&lt;/p&gt;

&lt;h2&gt;
  
  
  One row per job, not one number for the hobby
&lt;/h2&gt;

&lt;p&gt;I would give each print a row and keep the columns boring.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;Filament mass&lt;/strong&gt; comes from the slicer, including brim, supports, and purge if you use a multi-material system. Convert grams to cost with the price you actually paid per kilogram for that spool, not a generic “filament is cheap” average. Track failed prints as their own rows. A 15% fail rate is a cost, not a moral failing.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;Electricity&lt;/strong&gt; is an estimate, not a lab measurement. A conservative way is to use the manufacturer’s rated power as a ceiling, then apply a utilization factor because a printer does not pull nameplate watts for every second of a PLA job. QIDI lists the Q2 at 350 W plus 280 W for chamber heating. If you run an actively heated chamber for ABS or ASA, that second number belongs in the model; if you print PLA with chamber heat off, it should not silently inflate every row. Multiply estimated average watts by print hours and by your local price per kilowatt-hour. Leave a cell for the tariff so you can change it later.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;Time&lt;/strong&gt; is optional money, but it is not optional information. Include slicing, drying, bed cleaning, and restarting failed jobs if you want the spreadsheet to match real life. If you value an hour of your evening at anything above zero, long failed prints get expensive quickly.&lt;/p&gt;

&lt;p&gt;&lt;strong&gt;Consumables and wear&lt;/strong&gt; can be a simple monthly average: nozzles, build-surface sheets, cleaning supplies, and the occasional cutter or feed-path part. Do not pretend these are zero because they are small on day one.&lt;/p&gt;

&lt;h2&gt;
  
  
  What the sheet is for
&lt;/h2&gt;

&lt;p&gt;The point is comparison. A PETG bracket that succeeds on the first try can be cheaper than an ASA housing that needed enclosure preheat, ventilation time, and two restarts—even if the ASA spool was not much more expensive. The sheet also makes hardware trade-offs clearer. A machine with official material ratings and chamber control may reduce failed ABS jobs; it will not make electricity or filament free.&lt;/p&gt;

&lt;p&gt;When you are ready to compare enclosed options as part of that cost picture, I use this framework: &lt;a href="https://3dprofessorsworld.wordpress.com/2026/11/09/qidi-vs-bambu-vs-creality-compare-enclosed-printers/" rel="noopener noreferrer"&gt;QIDI vs Bambu vs Creality: compare enclosed printers&lt;/a&gt;.&lt;/p&gt;

&lt;p&gt;QIDI’s official store, if you want current enclosed model sheets to pull rated power and volumes from, is here: &lt;a href="https://qidi3d.com?sca_ref=12709201.UCHL5zC5pj" rel="noopener noreferrer"&gt;qidi3d.com&lt;/a&gt;.&lt;/p&gt;

&lt;p&gt;A starter sheet can live in any spreadsheet tool. Put units in the header row (grams, currency per kilogram, watts, hours, currency/kWh) so you do not mix a 1 kg spool price with a 250 g sample later. Keep a second tab for printer constants, such as rated power copied from a manufacturer sheet, and reference those cells from each job row.&lt;/p&gt;

&lt;p&gt;I would also add a “notes” column for the material and whether chamber heat was on, because otherwise PETG and ASA jobs get averaged into a meaningless unit cost. If you sell parts, separate hobby reprints from customer jobs so you do not price a bracket on a lucky first attempt. Update filament prices when you buy a new spool; old receipts quietly make the sheet too optimistic.&lt;/p&gt;

&lt;p&gt;Keep the formulas visible and the inputs honest. A spreadsheet that hides fail rates is just a more confident guess.&lt;/p&gt;

</description>
      <category>3dprinting</category>
      <category>productivity</category>
      <category>makers</category>
      <category>opensource</category>
    </item>
    <item>
      <title>Using slicer start G-code and Klipper-style waits to reduce warping</title>
      <dc:creator>Go Gams</dc:creator>
      <pubDate>Tue, 10 Nov 2026 05:18:59 +0000</pubDate>
      <link>https://dev.to/gamsgoworld/using-slicer-start-g-code-and-klipper-style-waits-to-reduce-warping-3amg</link>
      <guid>https://dev.to/gamsgoworld/using-slicer-start-g-code-and-klipper-style-waits-to-reduce-warping-3amg</guid>
      <description>&lt;p&gt;Warping is often blamed on “the printer,” when the job started before the bed—or the chamber—was actually stable. This post is about using slicer start sequences and Klipper-style temperature waits as process control, not as a bag of secret G-code tricks.&lt;/p&gt;

&lt;p&gt;I have not run these printers or flashed firmware for this article. Confirm every command against your machine’s documentation. A start script copied from a different board can heat the wrong heater or skip safety checks.&lt;/p&gt;

&lt;p&gt;Disclosure: this article contains an affiliate link; I may earn a commission at no extra cost to you.&lt;/p&gt;

&lt;h2&gt;
  
  
  What the start of a print is actually for
&lt;/h2&gt;

&lt;p&gt;The first centimeters of a part have to stick while the plastic is already trying to shrink. If extrusion begins while the bed is still climbing, or while a heated chamber is still cold, you have scheduled a thermal gradient into layer one.&lt;/p&gt;

&lt;p&gt;Most slicers already emit heat-and-wait commands for the bed and nozzle (commonly in the M140/M190 and M104/M109 family on general FDM profiles). The useful habit is to read your generated start G-code once and ask two questions. Does the printer wait until the bed is at the filament maker’s recommended temperature before the first-layer moves? If the machine has an actively heated chamber, does anything wait for that air temperature, or is the door merely closed?&lt;/p&gt;

&lt;p&gt;If you cannot set a chamber temperature, no amount of fancy start G-code will invent a closed-loop heater.&lt;/p&gt;

&lt;h2&gt;
  
  
  Klipper-style thinking, without cargo-cult macros
&lt;/h2&gt;

&lt;p&gt;Some consumer enclosed printers run Klipper. QIDI documents that the Q2 does, and that it can be used with QIDI Studio as well as third-party slicers such as OrcaSlicer and PrusaSlicer. On Klipper-based machines that actually have a chamber heater, firmware can expose that heater as a controlled object and wait on it the same way it waits on a bed. The principle is simple: do not start the toolpath until the temperatures you claimed in the profile exist in hardware.&lt;/p&gt;

&lt;p&gt;I will not paste a copy-ready macro here. Heater names, pin maps, and maximums are machine-specific, and a wrong heater-temperature command is not a harmless tweak. Use the profile and macros the manufacturer ships for your exact SKU, then change one thing at a time.&lt;/p&gt;

&lt;p&gt;QIDI rates the Q2’s second-generation independent PTC chamber heating up to 65°C, with a hotend up to 370°C and a bed up to 120°C. Those are official sheet values, not setpoints I have tuned. Official product information is here: &lt;a href="https://qidi3d.com?sca_ref=12709201.UCHL5zC5pj" rel="noopener noreferrer"&gt;qidi3d.com&lt;/a&gt;.&lt;/p&gt;

&lt;h2&gt;
  
  
  Slicer settings that usually matter more than clever G-code
&lt;/h2&gt;

&lt;p&gt;While you are in the start script, keep the first-layer settings honest. Slow the first layer. Use a slightly squished first-layer height. Add a brim on large flat bases. For ABS and ASA, keep early part cooling low unless a specific overhang demands a little air. For PLA, do not preheat a chamber to an engineering setpoint just because the printer can.&lt;/p&gt;

&lt;p&gt;Drafts still beat clever firmware. A vent aimed at an open door will undo a perfect wait command. Dry hygroscopic spools before you debug “mystery” layer splits.&lt;/p&gt;

&lt;p&gt;If you want a broader, non-firmware warping checklist, I keep one here: &lt;a href="https://3dprofessorsworld.wordpress.com/2026/11/09/cut-warping-3d-printer-enclosure-fix-list/" rel="noopener noreferrer"&gt;How to cut warping on a 3D printer&lt;/a&gt;.&lt;/p&gt;

&lt;p&gt;A useful debugging habit is to change one thermal condition per test: first-layer speed, bed wait, chamber wait, or part-cooling. If you change all four and the corners stay down, you have learned almost nothing you can reuse on the next model. Save the working start sequence with the filament name in the profile title so you do not “improve” it by accident next week.&lt;/p&gt;

&lt;p&gt;The unglamorous win is synchronization: the slicer, the firmware, and the filament maker’s temperature range should be telling the same story before the nozzle draws the first outline.&lt;/p&gt;

</description>
      <category>3dprinting</category>
      <category>klipper</category>
      <category>gcode</category>
      <category>makers</category>
    </item>
    <item>
      <title>How I Cut My Streaming and AI Subscription Costs (Shared Plans, Annual Billing, Regional Pricing, Cancelling)</title>
      <dc:creator>Go Gams</dc:creator>
      <pubDate>Thu, 29 Oct 2026 13:15:54 +0000</pubDate>
      <link>https://dev.to/gamsgoworld/how-i-cut-my-streaming-and-ai-subscription-costs-shared-plans-annual-billing-regional-pricing-bfk</link>
      <guid>https://dev.to/gamsgoworld/how-i-cut-my-streaming-and-ai-subscription-costs-shared-plans-annual-billing-regional-pricing-bfk</guid>
      <description>&lt;p&gt;Disclosure: the GamsGo link is my referral link; I may earn a commission.&lt;/p&gt;

&lt;blockquote&gt;
&lt;p&gt;&lt;strong&gt;Disclosure:&lt;/strong&gt; This post includes an affiliate (referral) link. I may receive compensation if you purchase through it. It costs you nothing extra, and every other tip here works without it.&lt;/p&gt;
&lt;/blockquote&gt;

&lt;p&gt;As developers we stack subscriptions fast: a couple of streaming services, music for focus, YouTube Premium for tutorials without ads, and now one or more AI assistants. Each one looks small. Together they add up. Here is the process I use to keep the total under control — no magic, just a checklist.&lt;/p&gt;

&lt;h2&gt;
  
  
  1. Audit everything first
&lt;/h2&gt;

&lt;p&gt;Before optimizing, list what you actually pay for. Go through your bank/card statements and app-store subscription pages (Google Play and Apple both have one). Write down each service, its billing cycle, and the renewal date.&lt;/p&gt;

&lt;p&gt;Then ask one question per line: &lt;em&gt;did I use this in the last 30 days?&lt;/em&gt; If not, it's a candidate for cancelling.&lt;/p&gt;

&lt;h2&gt;
  
  
  2. Cancel what you don't use (and set reminders)
&lt;/h2&gt;

&lt;p&gt;The cheapest subscription is the one you don't have. Most streaming services let you cancel and come back later without losing your profile. A pattern that works well: subscribe for the month a show you want is out, then cancel.&lt;/p&gt;

&lt;p&gt;For free trials, put a calendar reminder a day or two before the trial ends. It takes 10 seconds and prevents surprise charges.&lt;/p&gt;

&lt;h2&gt;
  
  
  3. Use annual billing — only for things you use daily
&lt;/h2&gt;

&lt;p&gt;Many services offer a lower effective monthly price on yearly plans. Check the provider's own pricing page and compare it against 12× the monthly price. This only makes sense for tools you're sure you'll keep all year (for me: music and my main AI assistant). For anything you use occasionally, monthly + cancelling is usually better.&lt;/p&gt;

&lt;h2&gt;
  
  
  4. Check official family and duo plans
&lt;/h2&gt;

&lt;p&gt;Spotify, YouTube Premium, Netflix and others offer official family/duo/household plans. If you live with others, splitting one of these is often the simplest legitimate saving. Read each service's rules on who counts as a household member.&lt;/p&gt;

&lt;h2&gt;
  
  
  5. Look at regional pricing — carefully
&lt;/h2&gt;

&lt;p&gt;Prices differ by country. Don't use VPN tricks to fake your location — it usually breaks the provider's terms and can get your account closed. But if you genuinely move or travel, check the local price page, and look at bundles from local mobile carriers or banks, which sometimes include a streaming or music subscription.&lt;/p&gt;

&lt;h2&gt;
  
  
  6. Student and work perks
&lt;/h2&gt;

&lt;p&gt;Student discounts exist for several music and streaming services. Also check your employer or developer programs — some companies reimburse AI tools or learning platforms.&lt;/p&gt;

&lt;h2&gt;
  
  
  7. Shared-plan marketplaces (one option)
&lt;/h2&gt;

&lt;p&gt;There are also marketplaces that sell seats on shared subscription plans. One option is &lt;strong&gt;GamsGo&lt;/strong&gt;, which offers shared plans for services like Netflix, Spotify, YouTube Premium, Disney+ and ChatGPT Plus, usually cheaper than buying alone.&lt;/p&gt;

&lt;p&gt;Before you buy, &lt;strong&gt;read GamsGo's terms&lt;/strong&gt; and the original service's terms, and decide whether a shared seat fits how you use the service. It's not right for everyone — e.g. if you need full account control, a direct plan is better.&lt;/p&gt;

&lt;p&gt;My referral link: &lt;a href="https://www.gamsgo.com/partner/NH8H7ERw" rel="noopener noreferrer"&gt;https://www.gamsgo.com/partner/NH8H7ERw&lt;/a&gt;&lt;/p&gt;

&lt;h2&gt;
  
  
  My routine, summarized
&lt;/h2&gt;

&lt;ol&gt;
&lt;li&gt;Quarterly audit of all subscriptions.&lt;/li&gt;
&lt;li&gt;Cancel anything unused for 30 days.&lt;/li&gt;
&lt;li&gt;Annual billing only for daily tools.&lt;/li&gt;
&lt;li&gt;Official family/duo plans where possible.&lt;/li&gt;
&lt;li&gt;Student/work perks.&lt;/li&gt;
&lt;li&gt;Shared plans as an optional extra, after reading the terms.&lt;/li&gt;
&lt;/ol&gt;

&lt;p&gt;What's your trick for keeping subscription costs down? Share it in the comments.&lt;/p&gt;




&lt;blockquote&gt;
&lt;p&gt;&lt;strong&gt;Disclosure (again):&lt;/strong&gt; The GamsGo link above is a referral link; I may earn a commission if you buy through it. No other links in this post are affiliate links.&lt;/p&gt;
&lt;/blockquote&gt;

</description>
      <category>productivity</category>
      <category>ai</category>
      <category>discuss</category>
      <category>money</category>
    </item>
  </channel>
</rss>
