<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom" xmlns:dc="http://purl.org/dc/elements/1.1/">
  <channel>
    <title>DEV Community: Joan Bernier</title>
    <description>The latest articles on DEV Community by Joan Bernier (@joanbernierpixels).</description>
    <link>https://dev.to/joanbernierpixels</link>
    <image>
      <url>https://media2.dev.to/dynamic/image/width=90,height=90,fit=cover,gravity=auto,format=auto/https:%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Fuser%2Fprofile_image%2F4256911%2F5dfe5eec-8f58-41e2-919c-3623c3ab61f1.jpg</url>
      <title>DEV Community: Joan Bernier</title>
      <link>https://dev.to/joanbernierpixels</link>
    </image>
    <atom:link rel="self" type="application/rss+xml" href="https://dev.to/feed/joanbernierpixels"/>
    <language>en</language>
    <item>
      <title>16x16 or 32x32? Pitfalls of Drawing a Mockingjay-Pin Pickup Icon in a Pixel Art Maker</title>
      <dc:creator>Joan Bernier</dc:creator>
      <pubDate>Sat, 21 Nov 2026 07:56:51 +0000</pubDate>
      <link>https://dev.to/joanbernierpixels/16x16-or-32x32-pitfalls-of-drawing-a-mockingjay-pin-pickup-icon-in-a-pixel-art-maker-2jbo</link>
      <guid>https://dev.to/joanbernierpixels/16x16-or-32x32-pitfalls-of-drawing-a-mockingjay-pin-pickup-icon-in-a-pixel-art-maker-2jbo</guid>
      <description>&lt;p&gt;I wanted a small gold pin as a collectible in a jam-sized game: a ring with a bird inside, wings spread, something the player grabs and hears a chime. The Hunger Games: Sunrise on the Reaping had just opened, so a fan-made mockingjay-style pin felt like the obvious thing to draw. I opened a browser Pixel Art Maker, picked 16×16 because "pickups are small," and then had to learn why that was the wrong call.&lt;/p&gt;

&lt;p&gt;Here's what went wrong, and what I'd do differently next time.&lt;/p&gt;

&lt;h3&gt;
  
  
  Pitfall 1: 16×16 can hold a ring or a bird, not both
&lt;/h3&gt;

&lt;p&gt;My first attempt fit in 16 cells and looked fine while I was zoomed in on the grid. Zoomed out, it fell apart.&lt;/p&gt;

&lt;p&gt;The ring already takes two cells of thickness on each side, plus the dark outline. That leaves roughly a 10×10 hole for the bird. Inside that, I had to show a head, a beak, two wings and a tail. The wings ended up touching the ring, the head was one or two cells, and the beak didn't exist. On the left side of the comparison image below, you can see the result: a gold ring with a lump in the middle that could be a bird, a bow tie or a moth.&lt;/p&gt;

&lt;p&gt;&lt;a href="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2F7u77xtgrgqxx8kfpj7bi.png" class="article-body-image-wrapper"&gt;&lt;img src="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2F7u77xtgrgqxx8kfpj7bi.png" alt="Side-by-side pixel art pins on a dark background: on the left, a 16×16 gold ring where the bird is an unreadable blob in two shades of gold; on the right, a 32×32 version with a clear front-facing bird, a dark gap between bird and ring, and three gold tones. Labels read 16×16 and 32×32." width="800" height="467"&gt;&lt;/a&gt;&lt;/p&gt;

&lt;p&gt;The second problem was color. With that few cells, I only had room for two steps of gold, a dark and a mid tone. There was no space for a highlight that didn't eat a feature. Without a light tone, the pin read as flat brown at game scale.&lt;/p&gt;

&lt;p&gt;The tempting fix is to keep 16×16 and simplify harder: drop the ring, or drop the bird. For a generic coin that works. For this item the ring &lt;em&gt;and&lt;/em&gt; the bird were the whole point, so I stopped fighting it.&lt;/p&gt;

&lt;h3&gt;
  
  
  Pitfall 2: Sizing up only helps if you spend the extra cells on separation
&lt;/h3&gt;

&lt;p&gt;At 32×32 I didn't just redraw the same thing bigger. The change that made it readable was a one-cell dark gap between the ring and the bird. The outline color (#2A1808) runs around the inner edge of the ring and around the bird, with background (#0A0518) between them. That gap is what lets your eye separate the two shapes at a glance.&lt;/p&gt;

&lt;p&gt;The other changes:&lt;/p&gt;

&lt;ul&gt;
&lt;li&gt;
&lt;strong&gt;A frontal, symmetric bird.&lt;/strong&gt; Round head, short beak, wings spread straight out, short forked tail. This is my own heraldic-style design, not a trace of the side-profile bird people know from the films, and it also suits a pickup: it reads the same whether it spins or not.&lt;/li&gt;
&lt;li&gt;
&lt;strong&gt;Mirror X.&lt;/strong&gt; I drew the left half and let the mirror tool place the right half. For a symmetric icon that halves the work and stops the two wings from drifting by a cell.&lt;/li&gt;
&lt;li&gt;
&lt;strong&gt;Three steps of gold plus a highlight.&lt;/strong&gt; Dark gold #8A5A12, mid #D4A017, light #F0D060, and #FFF3C0 for the brightest pixels. The ring is lit from the upper right and falls off to dark gold on the lower left, so it reads as a round, raised object instead of a flat donut.&lt;/li&gt;
&lt;/ul&gt;

&lt;p&gt;Same subject, same palette family. Only the right half reads as a ring with a bird.&lt;/p&gt;

&lt;p&gt;If you want to try the 16 vs 32 test on your own icon, I did all of this in a &lt;a href="https://pixoffline.com/pixel-art-editor/" rel="noopener noreferrer"&gt;pixel art maker online&lt;/a&gt; that runs in the browser. A new canvas starts at 32×32, and the grid presets let you jump to 16×16 to check how badly your design survives the shrink.&lt;/p&gt;

&lt;h3&gt;
  
  
  Pitfall 3: The sparkle looked wrong until it had a path
&lt;/h3&gt;

&lt;p&gt;A static pickup is easy to miss, so I wanted a short shine loop. My first instinct was to flash the whole pin brighter. That just looks like the sprite is blinking.&lt;/p&gt;

&lt;p&gt;What worked was moving one highlight around the object over four frames:&lt;/p&gt;

&lt;ol&gt;
&lt;li&gt;Base lighting, no extra highlight.&lt;/li&gt;
&lt;li&gt;Highlight on the upper-left of the ring and the left wing.&lt;/li&gt;
&lt;li&gt;Highlight on the bird's chest.&lt;/li&gt;
&lt;li&gt;Highlight on the lower-right of the ring.&lt;/li&gt;
&lt;/ol&gt;

&lt;p&gt;&lt;a href="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Ff4fx25a6rqvn0ugt6bv4.png" class="article-body-image-wrapper"&gt;&lt;img src="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Ff4fx25a6rqvn0ugt6bv4.png" alt="A 2×2 sprite sheet of four frames of the gold ring-and-bird pin; a pale highlight moves from the upper-left ring and left wing, to the bird's chest, to the lower-right ring." width="800" height="800"&gt;&lt;/a&gt;&lt;/p&gt;

&lt;p&gt;So the glint travels from upper left, through the center, to lower right, then the loop resets. Each frame differs from the base by a handful of pale #FFF3C0 pixels. Everything else stays identical, which keeps it from shimmering.&lt;/p&gt;

&lt;p&gt;Building the frames was straightforward: finish frame 1, hit Duplicate (the copy lands right after the source frame), and paint only the highlight cells on the copy. Onion skin helps if you want to see the previous frame's glint while placing the next one. The final GIF runs at 180ms per frame, so one full pass is 720ms. For a pickup, that felt about right: noticeable, not frantic.&lt;/p&gt;

&lt;h3&gt;
  
  
  Pitfall 4: A GIF is not what the engine wants
&lt;/h3&gt;

&lt;p&gt;The GIF was nice for sharing, but the game needed the frames in one image. In the export panel I switched &lt;strong&gt;Format&lt;/strong&gt; to &lt;strong&gt;Sprite sheet&lt;/strong&gt;. The &lt;strong&gt;Pixel scale&lt;/strong&gt; slider sits right under it, and the label tells you the per-frame output size. I left it at 16×, which shows as "16× (512×512)". The four frames come out as a 2×2 grid, so the sheet is 1024×1024.&lt;/p&gt;

&lt;p&gt;&lt;a href="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fjm776js42o0kjjew5iip.png" class="article-body-image-wrapper"&gt;&lt;img src="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fjm776js42o0kjjew5iip.png" alt="Browser pixel art editor showing the finished 32×32 pin on the canvas, a four-frame timeline at 180ms per frame, and the export panel set to Sprite sheet with a 16× (512×512) pixel scale." width="800" height="703"&gt;&lt;/a&gt;&lt;/p&gt;

&lt;p&gt;Before you drop that file into an engine, check two things:&lt;/p&gt;

&lt;ul&gt;
&lt;li&gt;
&lt;strong&gt;Frame order is left to right, top to bottom.&lt;/strong&gt; Top-left is frame 1 (base), top-right is frame 2 (upper-left glint), bottom-left is frame 3 (chest), bottom-right is frame 4 (lower-right glint). If your animation plays out of order, check that your slicer reads rows first.&lt;/li&gt;
&lt;li&gt;
&lt;strong&gt;Slice by cell size, not by guessing.&lt;/strong&gt; At 16× each frame is 512×512, so slice the sheet into a 2-column, 2-row grid of 512-pixel cells. If you change the pixel scale, the cell size changes with it. Read it off the label before you export, not after.&lt;/li&gt;
&lt;/ul&gt;

&lt;p&gt;In the engine, treat it like any other pixel-art texture. Use nearest-neighbor (point) filtering, turn off texture compression for this asset, and set each frame's duration to match the 180ms you designed for. If you'd rather keep the file small and scale in the engine, lower the pixel scale before downloading and confirm the size label first.&lt;/p&gt;

&lt;h3&gt;
  
  
  What I'd do differently from the start
&lt;/h3&gt;

&lt;ul&gt;
&lt;li&gt;Sketch the icon at 32×32 first, then test a 16×16 version. Going the other way wastes time on a size that can't hold the design.&lt;/li&gt;
&lt;li&gt;Decide where the gap between shapes goes before picking colors. The gap did more for readability than any shade.&lt;/li&gt;
&lt;li&gt;Plan the shine as a path across the object, not a full-sprite flash.&lt;/li&gt;
&lt;li&gt;Write down the frame order and cell size of the sprite sheet next to the export. Future me always forgets.&lt;/li&gt;
&lt;/ul&gt;

&lt;p&gt;Everything here, from the blank canvas through the GIF and the sprite sheet, stayed in the browser. Nothing was uploaded and there was no account to create. Work autosaves to the browser's IndexedDB on that machine, so I still exported the PNG, the GIF and the sheet as soon as they were done. If you want to run your own icon through the same 16-then-32 check, &lt;a href="https://pixoffline.com/pixel-art-editor/" rel="noopener noreferrer"&gt;open the editor on a blank 32×32 canvas&lt;/a&gt; and try the shrink.&lt;/p&gt;

&lt;p&gt;&lt;em&gt;Fan art note: the pin is an original design made for fun around the film's release. It isn't official merchandise and isn't affiliated with or endorsed by the studio or the book's publisher. No official logos, stills or fonts were used.&lt;/em&gt;&lt;/p&gt;

&lt;p&gt;&lt;em&gt;Disclosure: the editor linked above is a tool on a site I run.&lt;/em&gt;&lt;/p&gt;

</description>
      <category>gamedev</category>
      <category>pixelart</category>
      <category>indiedev</category>
    </item>
  </channel>
</rss>
