<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom" xmlns:dc="http://purl.org/dc/elements/1.1/">
  <channel>
    <title>DEV Community: pcbbrew</title>
    <description>The latest articles on DEV Community by pcbbrew (@pcbbrew_e9ea9516675cb5ba9).</description>
    <link>https://dev.to/pcbbrew_e9ea9516675cb5ba9</link>
    <image>
      <url>https://media2.dev.to/dynamic/image/width=90,height=90,fit=cover,gravity=auto,format=auto/https:%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Fuser%2Fprofile_image%2F4256137%2F576725d5-399a-4629-acf6-e6e9000c07c6.png</url>
      <title>DEV Community: pcbbrew</title>
      <link>https://dev.to/pcbbrew_e9ea9516675cb5ba9</link>
    </image>
    <atom:link rel="self" type="application/rss+xml" href="https://dev.to/feed/pcbbrew_e9ea9516675cb5ba9"/>
    <language>en</language>
    <item>
      <title>I built a web app that turns one sentence into a KiCad PCB you can simulate in the browser</title>
      <dc:creator>pcbbrew</dc:creator>
      <pubDate>Fri, 20 Nov 2026 20:34:30 +0000</pubDate>
      <link>https://dev.to/pcbbrew_e9ea9516675cb5ba9/i-built-a-web-app-that-turns-one-sentence-into-a-kicad-pcb-you-can-simulate-in-the-browser-46pg</link>
      <guid>https://dev.to/pcbbrew_e9ea9516675cb5ba9/i-built-a-web-app-that-turns-one-sentence-into-a-kicad-pcb-you-can-simulate-in-the-browser-46pg</guid>
      <description>&lt;p&gt;For the last months I've been building &lt;strong&gt;PCBBrew&lt;/strong&gt;, a web app for makers: you describe a circuit in plain words and it gives you back a complete project. Not a sketch of an idea, but real files: a KiCad schematic, a routed PCB, firmware for ESP32, Arduino or Raspberry Pi Pico, and a live simulation in the browser where that firmware actually runs.&lt;/p&gt;

&lt;p&gt;The easiest way to explain it is to show one project from start to finish. You can open the same one and play with it, no signup needed: &lt;strong&gt;&lt;a href="https://pcbbrew.dev/demo/thermo" rel="noopener noreferrer"&gt;pcbbrew.dev/demo/thermo&lt;/a&gt;&lt;/strong&gt;&lt;/p&gt;

&lt;h2&gt;
  
  
  Step 1: one sentence
&lt;/h2&gt;

&lt;p&gt;This is the whole request:&lt;/p&gt;

&lt;blockquote&gt;
&lt;p&gt;A compact desk thermometer with an alarm: ESP32-C3 SuperMini, 0.96" OLED, SHT40 sensor, a small speaker with an LM386 amplifier for the alarm chime, two buttons and USB-C power. Keep the PCB as small as possible.&lt;/p&gt;
&lt;/blockquote&gt;

&lt;p&gt;The assistant asked one question (how to mount the OLED), suggested an alarm setpoint of 28 °C with 1 °C hysteresis, and then did the work: it picked real KiCad parts, read the LM386 datasheet and checked the circuit after every change.&lt;/p&gt;

&lt;p&gt;&lt;a href="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fqr5f9sg5cnjt292hdknf.jpg" class="article-body-image-wrapper"&gt;&lt;img src="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fqr5f9sg5cnjt292hdknf.jpg" alt=" " width="800" height="383"&gt;&lt;/a&gt;&lt;/p&gt;

&lt;h2&gt;
  
  
  Step 2: a real KiCad schematic
&lt;/h2&gt;

&lt;p&gt;The schematic is a normal KiCad file, split into blocks (controller, USB-C input, audio amplifier, modules) with notes that explain the choices, like the 5.1 kΩ CC pull-downs on the USB-C connector or why the LM386 is left at its standard gain of 20. You can open it in KiCad and keep working on it by hand.&lt;/p&gt;

&lt;p&gt;&lt;a href="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fuxzu0dum28fi9duq7tby.png" class="article-body-image-wrapper"&gt;&lt;img src="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fuxzu0dum28fi9duq7tby.png" alt=" " width="800" height="556"&gt;&lt;/a&gt;&lt;/p&gt;

&lt;h2&gt;
  
  
  Step 3: placed and routed PCB
&lt;/h2&gt;

&lt;p&gt;Parts are placed and routed automatically: 78 x 64 mm, two layers, with a ground plane under the amplifier. The design rule check finished with zero errors and zero unconnected pads.&lt;/p&gt;

&lt;p&gt;&lt;a href="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fl0ce5b53x9nrk9kn2rzr.jpg" class="article-body-image-wrapper"&gt;&lt;img src="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fl0ce5b53x9nrk9kn2rzr.jpg" alt=" " width="800" height="383"&gt;&lt;/a&gt;&lt;/p&gt;

&lt;h2&gt;
  
  
  Step 4: firmware that compiles
&lt;/h2&gt;

&lt;p&gt;PCBBrew writes the Arduino sketch for the pins it actually wired, and compiles it for the ESP32-C3 (25% of the flash here). From the same page you can flash a real board over USB with Web Serial in Chrome or Edge, no IDE needed.&lt;/p&gt;

&lt;p&gt;&lt;a href="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fqkxaiv8sv0ojuxmnvknr.jpg" class="article-body-image-wrapper"&gt;&lt;img src="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fqkxaiv8sv0ojuxmnvknr.jpg" alt=" " width="800" height="383"&gt;&lt;/a&gt;&lt;/p&gt;

&lt;h2&gt;
  
  
  Step 5: the simulation (my favourite part)
&lt;/h2&gt;

&lt;p&gt;The compiled firmware runs on an emulated ESP32-C3 right in the browser, and the parts around it are live widgets: the OLED shows what the firmware draws, the SHT40 has sliders for temperature and humidity, and the buttons can be clicked. Drag the temperature above 28 °C and the display switches to TEMP ALARM while the speaker plays the chime (press Audio to hear it). The serial monitor shows exactly what the firmware prints.&lt;/p&gt;

&lt;p&gt;So you can find firmware bugs, and wiring mistakes, before ordering a single board.&lt;/p&gt;

&lt;p&gt;&lt;a href="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fq5t9kb5bx7g0v0opsrfb.jpg" class="article-body-image-wrapper"&gt;&lt;img src="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fq5t9kb5bx7g0v0opsrfb.jpg" alt=" " width="800" height="383"&gt;&lt;/a&gt;&lt;/p&gt;

&lt;h2&gt;
  
  
  Step 6: 3D and manufacturing files
&lt;/h2&gt;

&lt;p&gt;The assembled board is shown in 3D with its modules, and the project exports everything you need to order it: Gerbers, drill files, BOM and pick-and-place positions, the KiCad project, a STEP model and a PDF with the documentation.&lt;/p&gt;

&lt;p&gt;&lt;a href="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fobncns30kue6f7fhtixt.jpg" class="article-body-image-wrapper"&gt;&lt;img src="https://media2.dev.to/dynamic/image/width=800%2Cheight=%2Cfit=scale-down%2Cgravity=auto%2Cformat=auto/https%3A%2F%2Fdev-to-uploads.s3.us-east-2.amazonaws.com%2Fuploads%2Farticles%2Fobncns30kue6f7fhtixt.jpg" alt=" " width="800" height="383"&gt;&lt;/a&gt;&lt;/p&gt;

&lt;h2&gt;
  
  
  What it does not do (yet)
&lt;/h2&gt;

&lt;p&gt;I'd rather be upfront about the limits:&lt;/p&gt;

&lt;ul&gt;
&lt;li&gt;The power rails and the firmware are simulated; the LM386 audio stage in this project is not, so the actual loudness still needs a test on real hardware.&lt;/li&gt;
&lt;li&gt;Automatic checks are not a substitute for a review by someone competent before you build or power a board.&lt;/li&gt;
&lt;li&gt;It's meant for low-voltage hobby electronics (30 V and below), not mains.&lt;/li&gt;
&lt;/ul&gt;

&lt;h2&gt;
  
  
  Try it and tell me what breaks
&lt;/h2&gt;

&lt;p&gt;PCBBrew is in a closed beta for now. The demos are public and run fully in the browser, no account needed:&lt;/p&gt;

&lt;ul&gt;
&lt;li&gt;Thermometer from this post: &lt;a href="https://pcbbrew.dev/demo/thermo" rel="noopener noreferrer"&gt;pcbbrew.dev/demo/thermo&lt;/a&gt;
&lt;/li&gt;
&lt;li&gt;More demos and the waitlist: &lt;a href="https://pcbbrew.dev" rel="noopener noreferrer"&gt;pcbbrew.dev&lt;/a&gt;
&lt;/li&gt;
&lt;/ul&gt;

&lt;p&gt;I'd really like feedback from people who design real boards: what would make you trust a generated schematic, and what does the simulator get wrong? Comments are open.&lt;/p&gt;

</description>
      <category>showdev</category>
      <category>electronics</category>
      <category>arduino</category>
      <category>webdev</category>
    </item>
  </channel>
</rss>
