How to Calculate Your Freelance Hourly Rate (Floor-Rate Formula)

XVisionary — Sat, 24 Oct 2026 19:25:04 +0000

The fastest way to set a freelance hourly rate you won't regret is to start from your own numbers, not from what other freelancers charge. This guide shows how to calculate your freelance hourly rate with a four-number formula, walks through a worked example, and ends with a quick checklist you can run before your next quote.

Most new freelancers pick a rate by looking around, then knocking a bit off to feel safe. The trouble is that other people's rates don't know your rent, your software bills, or how many hours you can actually bill in a month.

What is a freelance floor rate?

Your floor rate is the lowest hourly rate where your bills, your take-home pay, and your tax set-aside are all covered. You can charge more than your floor (you usually should), but quoting below it means you're working at a loss.

Think of it as your minimum hourly rate as a freelancer: the line you don't go under.

The freelance hourly rate formula

You need four numbers:

Monthly take-home goal: what you want to pay yourself each month.
Monthly overhead: software, equipment, internet, fees, and anything else the business pays for.
Tax set-aside percentage: the share you put aside for taxes. Many freelancers use somewhere around 25 to 30 percent, but your own number depends on where you live and your situation, so check with a tax professional.
Billable hours per month: hours you can actually charge for, not the hours you work. Admin, marketing, and invoicing don't count.

Then:

Pay before tax = Take-home goal ÷ (1 − Tax %)
Floor rate     = (Pay before tax + Business costs) ÷ Billable hours

Dividing by (1 − tax %) "grosses up" your take-home: it finds the pre-tax pay that still leaves your goal once tax comes out. Business costs are added after that, not grossed up, because they are paid before profit is taxed. Taxes vary a lot by situation, so treat this as a planning formula, not a tax calculation.

Worked example: calculating a freelance hourly rate

Here's a made-up example to show the math. Maya is a freelance designer. She wants to take home $3,000 a month, her overhead is $400, she sets aside 25 percent for tax, and she can realistically bill 60 hours a month.

Pay before tax: $3,000 ÷ (1 − 0.25) = $4,000
Add business costs: $4,000 + $400 = $4,400 a month
Floor rate: $4,400 ÷ 60 = $73.33 an hour

A tempting shortcut is to add take-home and costs and multiply by the tax percentage: ($3,000 + $400) × 0.25 = $850, which gives about $70.83 an hour. That undershoots, because tax comes out of your pre-tax pay, not out of what you take home.

So about $73 an hour is the lowest Maya can quote without falling short. If she'd guessed $45 because "that's what beginners charge," she'd come up short every month without knowing why.

From floor rate to the rate you actually quote

Your floor isn't your price. Two simple rules of thumb for a target rate:

Floor × 1.3 gives a healthier target that leaves room for slow months and unpaid revisions. For Maya, that's about $95 an hour.
Floor × 1.5 is a stronger target once you have a portfolio or repeat clients. For Maya, about $110 an hour.

These multipliers are starting points, not rules. Your market, your skills, and what clients in your niche will pay all matter too.

How many billable hours should a freelancer plan for?

The number people get wrong most often is billable hours. A 40-hour week is not 160 billable hours a month. Between finding clients, emails, invoicing, and gaps between projects, many freelancers bill far less than they work.

If you're not sure, start low (say 50 to 80 billable hours a month) and adjust once you've tracked a few months. A lower billable-hours number pushes your floor rate up, which is usually closer to reality.

Checklist before your next quote

I know my monthly take-home goal.
I've added up my real monthly overhead.
I've picked a tax set-aside percentage and checked it's reasonable for me.
I've been honest about billable hours.
My quote is at or above my floor rate.

Freelance hourly rate FAQ

How do I calculate my freelance hourly rate?

Divide your take-home goal by (1 − tax %), add your monthly business costs, then divide by the hours you can realistically bill each month. That gives your floor rate, the minimum you should charge. Most freelancers then quote above the floor (for example, floor × 1.3) to cover slow months.

What is a good hourly rate for a beginner freelancer?

There isn't one number that fits everyone, because it depends on your costs, your location, and your field. A better question is "what's the lowest rate that covers my bills, taxes, and pay?" Work out that floor rate first, then check what clients in your niche pay and price at or above your floor.

How many billable hours does a freelancer have per month?

Usually far fewer than the hours you work. Client hunting, admin, and invoicing aren't billable. If you have no data yet, planning on roughly 50 to 80 billable hours a month is a cautious starting point. Track your real hours for a few months and update the number.

Should I include taxes in my freelance rate?

Yes. Nobody withholds tax from freelance payments, so if your rate doesn't include a tax set-aside, you're effectively charging less than you think. The formula above grosses up your take-home for tax before dividing by billable hours. Confirm the right percentage for you with a tax professional.

Should I charge hourly or by the project?

Either can work. Even if you quote per project, it helps to know your floor rate: estimate the hours, multiply by your target rate, and make sure the project price stays above your floor once revisions and admin are included.

Free tools (try these first)

Disclosure: Some links below go to free and paid products I publish on Gumroad (XVisionary). Free downloads cost nothing; paid links are product links for tools I made. This post is educational first — use what helps and skip the rest.

Free online calculator (no signup): Freelance Rate Calculator — same floor-rate math in the browser.
Free one-page cheat sheet: Freelance Rate Cheat Sheet — pay-what-you-want; $0 is fine.

If you later want packages and project quotes from the same numbers, there is an optional spreadsheet: Freelance Rate & Quote Calculator ($9.99). Soft option only.

This article is general information, not tax, legal, or financial advice. Pricing depends on your market and skills, and tax situations vary. Talk to a qualified professional about your own situation.

Also on the brand site: How to calculate your freelance hourly rate.

DEV Community: XVisionary