DEV Community

Rich
Rich

Posted on • Originally published at goingserverless.com on

How to build an AppSync API using a single table DynamoDB design

#appsync #aws #dynamodb #serverless

If you want to start a flame war in the AWS AppSync community then ask if you should use a single or multiple table design for DynamoDB. There's no shortage of opinions in both directions 🔥🔥🔥

In this article I'm going to show you how I built a generic single table DynamoDB solution for AWS AppSync.

Historical Context

Before I explain "how" it's important to remember that DynamoDB did not support on-demand capacity (pay per use pricing) when AppSync was originally released. Managing the read and write capacity across multiple tables was a lot of extra work. Under provisioning could result in your API failing and over provisioning was expensive.

By using a single table I could reduce the amount of time spent managing table capacity and save a lot of money. That is why began exploring how to build an AppSync API using only a single DynamoDB table.

Primary Key

For the tables primary key I used a generic attribute named PK that does not appear in the GraphQL schema. Keeping the primary key for the table out of the GraphQL schema allows me to use any field in the GraphQL type as the primary ID for a record.

Note: To keep my examples simple I will use id as the primary field but you can use a different field or fields.

Mapping the primary ID for the GraphQL type to PK is handled in the AppSync resolver request template. There are two patterns I recommend when mapping fields to PK.

  1. NODE#${id} if you have globally unique ID's
  2. ${__typename}#${id} if you do not have globally unique ID's

Example: Let's start with a simple GraphQL schema for farms.

type Farm {
  id: ID!
  name: String
}

input CreateFarmInput {
  name: String!
}

type Mutation {
  createFarm(input: CreateFarmInput!): Farm
}

type Query {
  findFarm(id: ID!): Farm
}
Enter fullscreen mode Exit fullscreen mode

The request resolver template for createFarm would be

#set( $id = $util.autoId() )
$util.qr($ctx.args.input.put("id", $id))
$util.qr($ctx.args.input.put("__typename", "Farm"))

{
  "version" : "2017-02-28",
  "operation" : "PutItem",
  "key" : {
    "PK": $util.dynamodb.toDynamoDBJson("NODE#$id"),
  },
  "attributeValues" : $util.dynamodb.toMapValuesJson($ctx.args.input)
}
Enter fullscreen mode Exit fullscreen mode

This template generates an id for the new farm that is added to the input along with the __typename. It then prefixes that ID with NODE# to generate the PK value for the DynamoDB key.

When invoked with the following input

mutation {
  createFarm(input: { name: "Old MacDonald's" }) {
    id
  }
}
Enter fullscreen mode Exit fullscreen mode

It will create a record in DynamoDB similar to

PK __typename id name
NODE#1234 Farm 1234 Old MacDonald's

The farm can then be retrieved using findFarm that accepts an id which is mapped to the PK attribute in the request template:

{
  "version": "2017-02-28",
  "operation": "GetItem",
  "key": {
    "PK": $util.dynamodb.toDynamoDBJson("NODE#$ctx.args.id"),
  }
}
Enter fullscreen mode Exit fullscreen mode

SECURITY WARNING

When using the NODE#${id} pattern you must check the __typename is one that you expect in every resolver that fetches, updates or deletes records. Failure to do this may allow someone to by pass security by using the ID from one type with the resolver for a different type that is more permissive.

The examples in this article do not include this check because I am focusing on the DynamoDB access pattern and not AppSync access controls.

Unique Secondary Fields

Requiring additional fields in our GraphQL type to be unique is a common problem. The Farm type contains an id field that uniquely identifies a record and never changes. It also has a name field that can change but must be unique.

With DynamoDB only the primary key on the table is unique. We can't add this constraint to other attributes. To solve this I can use TransactionWriteItems to write a record under different keys. The first key is the NODE#${id} as previously discussed. The second key uses the pattern ${__typename}#${fieldname}#${value}.

The createFarm resolver request template will now look like

#set( $id = $util.autoId() )
$util.qr($ctx.args.input.put("id", $id))
$util.qr($ctx.args.input.put("__typename", "Farm"))

{
  "version": "2018-05-29",
  "operation": "TransactWriteItems",
  "transactItems": [
    {
      "table": "YOUR-TABLE-NAME",
      "operation": "PutItem",
      "key": {
        "PK": $util.dynamodb.toDynamoDBJson("NODE#$id")
      },
      "attributeValues": $util.dynamodb.toMapValuesJson($ctx.args.input),
      "condition": {
        "expression": "attribute_not_exists(PK)",
        "returnValuesOnConditionCheckFailure": false
      }
    },
    {
      "table": "YOUR-TABLE-NAME",
      "operation": "PutItem",
      "key": {
        "PK": $util.dynamodb.toDynamoDBJson("Farm#name#$ctx.args.input.name.toLowerCase()")
      },
      "attributeValues": $util.dynamodb.toMapValuesJson($ctx.args.input),
      "condition": {
        "expression": "attribute_not_exists(PK)",
        "returnValuesOnConditionCheckFailure": false
      }
    },
  ]
}
Enter fullscreen mode Exit fullscreen mode

Because I need to use the 2018-05-29 resolver template version for TransactionWriteItems and I only want to return one record my resolver response template is a little more complicated

#if ( $ctx.error )
  $util.error($ctx.error.message, $ctx.error.type)
#end
$util.toJson($ctx.args.input)
Enter fullscreen mode Exit fullscreen mode

The main thing to understand is that I'm returning the $ctx.args.input instead of $ctx.result. This contains our Farm type with the id and __typename set correctly by the request template.

In DynamoDB the records will be stored as:

PK __typename id name
NODE#1234 Farm 1234 Old MacDonald's
Farm#name#old macdonald's Farm 1234 Old MacDonald's

If I call the createFarm mutation twice with the same name it will now fail because a record with the key Farm#name#old macdonald's already exists.

You may have noticed that I converted the name to lower case before using it in the PK attribute for the second record. This prevents people from getting around the unique name restriction by using different combinations of upper and lower case letters. The name attribute itself still retains the original case and that's the value the user will see when the record is queried via GraphQL.

As a side benefit I now have a fast way to retrieve a Farm record from the name using GetItem. This is useful if you have a natural key like email address or ISBN that you want to fetch records by.

One to One Relationships

One to One relationships are simple to implement. Let's add a logo to the Farm that returns an Image type.

type Image {
  id: ID!
  url: String
}

type Farm {
  id: ID!
  name: String
  logo: Image
}
Enter fullscreen mode Exit fullscreen mode

I will also add a logoId field to the input for createFarm

mutation {
  createFarm(input: { name: "Old MacDonald's", logoId: "1111" }) {
    id
  }
}
Enter fullscreen mode Exit fullscreen mode

In DynamoDB this will be saved as

PK __typename id imageId name url
NODE#1234 Farm 1234 1111 Old MacDonald's
NODE#1111 Image 1111 logo.gif

When the request resolver template for logo is executed the DynamoDB record for the farm is available in $ctx.source. This allows us to perform a GetItem with the correct PK value to retrieve the Image.

{
  "version": "2017-02-28",
  "operation": "GetItem",
  "key": {
    "PK": $util.dynamodb.toDynamoDBJson("NODE#$ctx.source.logoId"),
  }
}
Enter fullscreen mode Exit fullscreen mode

Traversing both directions in a one to one relationship requires storing the ID for the opposite side in each record. In our example this means storing the imageId with the Farm and farmId with the Image.

Many to One Relationships

Many to One relationships work almost exactly the same as one to one relationships. On the many side you need to store the ID for the one side of the relationship.

Let's expand our farm to include cow's.

type Cow {
  id: ID!
  name: String
  farm: Farm
}

input CreateCowInput {
  name: String!
  farmId: ID!
}

type Farm {
  id: ID!
  name: String
}

input CreateFarmInput {
  name: String!
}

type Mutation {
  createCow(input: CreateCowInput!): Cow
  createFarm(input: CreateFarmInput!): Farm
}

type Query {
  findFarm(id: ID!): Farm
}
Enter fullscreen mode Exit fullscreen mode

To create a new cow we would execute a mutation like

mutation {
  createCow(input: { name: "Bessie", farmId: "5678" }) {
    id
  }
}
Enter fullscreen mode Exit fullscreen mode

The request resolver template for createCow is the same as createFarm with the __typename changed from Farm to Cow.

#set( $id = $util.autoId() )
$util.qr($ctx.args.input.put("id", $id))
$util.qr($ctx.args.input.put("__typename", "Cow"))

{
  "version" : "2017-02-28",
  "operation" : "PutItem",
  "key" : {
    "PK": $util.dynamodb.toDynamoDBJson("NODE#$id"),
  },
  "attributeValues" : $util.dynamodb.toMapValuesJson($ctx.args.input)
}
Enter fullscreen mode Exit fullscreen mode

This will create a DynamoDB record similar to:

PK __typename id farmId name
NODE#1234 Cow 1234 5678 Bessie
NODE#5678 Farm 5678 Old MacDonald's

Our request resolver for the farm field on the Cow type would be:

{
  "version": "2017-02-28",
  "operation": "GetItem",
  "key": {
    "PK": $util.dynamodb.toDynamoDBJson("NODE#$ctx.source.farmId"),
  }
}
Enter fullscreen mode Exit fullscreen mode

One to Many Relationships

One to Many relationships are more complicated and require writing additional attributes to the DynamoDB record. To implement these I use generic GSI's named GSI01, GSI02, GSI03, etc. Each of these will have a corresponding partition key PK01, PK02, PK03, etc and sort key SK01, SK02, SK03. The additional data for these attributes is added by the resolver request template during the create/update mutation.

In PKxx you typically write the value ${ __typename}#${othersideId} where __ typename is the name of the type you're writing data for (the many side) and othersideId is the ID for the one side. The value for SKxx will depend on how you want sort the results when traversing from the one to the many. I'll explain this further down. All of this should be done in the resolver template so these details are not exposed in the GraphQL schema.

Let's make a tiny change to our farm schema adding a connection between Farm and Cow.

type Farm {
  id: ID!
  name: String
  cows: [Cow]
}
Enter fullscreen mode Exit fullscreen mode

Everything else will remain the same.

When retrieving the cows from the farm I want them sorted by name. To do this I'll copy the name value into SK01. With the extra information our createCow request template now looks like

#set( $id = $util.autoId() )
$util.qr($ctx.args.input.put("id", $id))
$util.qr($ctx.args.input.put("__typename", "Cow"))
$util.qr($ctx.args.input.put("PK01", "Cow#$ctx.args.input.farmId"))
$util.qr($ctx.args.input.put("SK01", $ctx.args.input.name))

{
    "version" : "2017-02-28",
    "operation" : "PutItem",
    "key" : {
        "PK": $util.dynamodb.toDynamoDBJson("NODE#$id"),
    },
    "attributeValues" : $util.dynamodb.toMapValuesJson($ctx.args.input)
}
Enter fullscreen mode Exit fullscreen mode

When create cow is called with

mutation {
  createCow(input: { name: "Bessie", farmId: "5678" }) {
    id
  }
}
Enter fullscreen mode Exit fullscreen mode

The cow DyanmoDB record is now written as:

PK __typename id farmId name PK01 SK01
NODE#1234 Cow 1234 5678 Bessie Farm#5678 Bessie
NODE#5678 Farm 5678 Old MacDonald's

To get from farm to cow we want the cows resolver request template to Query the GS01 index for a PK01 value that is the farms ID prefixed by the return type. Our cows resolver request template is

{
    "version" : "2017-02-28",
    "operation" : "Query",
    "index": "GS01",
    "query" : {
        "expression": "PK01 = :pk",
        "expressionValues" : {
            ":pk" : $util.dynamodb.toDynamoDBJson("Cow#$ctx.source.id")
        }
    }
}
Enter fullscreen mode Exit fullscreen mode

Let's continue expanding the farm by adding chickens.

type Chicken {
  id: ID!
  name: String
  farm: Farm
}

type Cow {
  id: ID!
  name: String
  farm: Farm
}

input CreateChickenInput {
  name: String!
  farmId: ID!
}

input CreateCowInput {
  name: String!
  farmId: ID!
}

type Farm {
  id: ID!
  name: String
  chickens: [Chicken]
  cows: [Cow]
}

type Mutation {
  createChicken(input: CreateChickenInput!): Chicken
  createCow(input: CreateCowInput!): Cow
}

type Query {
  farm(id: ID!): Farm
}
Enter fullscreen mode Exit fullscreen mode

You can copy the resolver request templates from createCow to createChicken and cows to chickens. Just remember to replace Cow with Chicken inside the templates.

What you might have noticed is that I did not need to create a new GSI. By prefixing the farmId with the __typename we are preventing a data collision which allows us to use the same GSI once for each GraphQL type. This slows the growth in GSI's because the number of GSI's for the table is determined by the GraphQL type using the largest number of GSI's.

The ${returnTypename}#${context.source.id} pattern also works when a field returns multiple types. Let's modify the schema by adding Animal which can be a Chicken or Cow.

union Animal = Chicken | Cow

type Chicken {
  id: ID!
  name: String
  farm: Farm
}

type Cow {
  id: ID!
  name: String
  farm: Farm
}

input CreateChickenInput {
  name: String!
  farmId: ID!
}

input CreateCowInput {
  name: String!
  farmId: ID!
}

type Farm {
  id: ID!
  name: String
  chickens: [Chicken]
  cows: [Cow]
  animals: [Animal]
}

type Mutation {
  createChicken(input: CreateChickenInput!): Chicken
  createCow(input: CreateCowInput!): Cow
}

type Query {
  farm(id: ID!): Farm
}
Enter fullscreen mode Exit fullscreen mode

To make this work I need a second GSI's. In PK02 I'll store Animal#${farmId} using the createChicken and createCow resolver request templates. Here's what createCow now looks like

#set( $id = $util.autoId() )
$util.qr($ctx.args.input.put("id", $id))
$util.qr($ctx.args.input.put("__typename", "Cow"))
$util.qr($ctx.args.input.put("PK01", "Cow#$ctx.args.input.farmId"))
$util.qr($ctx.args.input.put("SK01", $ctx.args.input.name))
$util.qr($ctx.args.input.put("PK02", "Animal#$ctx.args.input.farmId"))
$util.qr($ctx.args.input.put("SK02", $ctx.args.input.name))

{
    "version" : "2017-02-28",
    "operation" : "PutItem",
    "key" : {
        "PK": $util.dynamodb.toDynamoDBJson("NODE#$id"),
    },
    "attributeValues" : $util.dynamodb.toMapValuesJson($ctx.args.input)
}
Enter fullscreen mode Exit fullscreen mode

The animals resolver request template on the Farm type will look similar to cows or chickens but it will use the prefix Animal# and the GS02 index.

{
  "version" : "2017-02-28",
  "operation" : "Query",
  "index": "GS02",
  "query" : {
      "expression": "PK02 = :pk",
      "expressionValues" : {
        ":pk" : $util.dynamodb.toDynamoDBJson("Animal#$ctx.source.id")
      }
  }
}
Enter fullscreen mode Exit fullscreen mode

This will return data for both Cow and Chicken types sorted by the animal name. AppSync can tell which type each record is by looking at the __typename value that was written when it was created.

Before finishing I want to share a couple of tricks that you might find helpful.

  1. Storing the lower case value of a field in SKxx gives case insensitive sorting while still being able to show the value as originally provided.
  2. Using a default value like AAAAAAAAAAA or ZZZZZZZZZZZ in SKxx when a field is null allows you to group entries without a value at the top or bottom of a list that is otherwise sorted.
  3. Adding prefixes to the SKxx value can be used to group sorted results. An example of this would be prefixing the name of active users with A and inactive with I.
  4. Conditionally writing attributes allows you to create sparse indexes when you want to exclude records from the result. An example of this might be using GS01 to access all cows that the farm has ever owned and GS02 to access only cows that are still here.

Many to Many Relationships

Many to Many relationships with DynamoDB and AppSync can be problematic. Where possible you should avoid them. This can be done by:

  1. Denormalizing data. For example: Store the state and country name as part of an address record instead of storing ID's then using resolvers to look up those records.
  2. Perform the join in the application. For example: A CMS might have a many to many relationship between content and content types but it only has a small number of content types. You could load all of the content types through a list operation (using a DynamoDB Query) then match the content to the content type in the application.

If you cannot avoid many to many joins then options include:

  1. Using 1-M and M-1 relationships with an intermediate type (recommended by the Amplify team). This works but it should come with a big warning because you are almost certainly introducing the N+1 problem. On the 1-M side you'll be using an efficient Query operation but on the M-1 side you're probably performing M x GetItem operations.
  2. If you only have a small number of connections between two items and you only access it in one direction then you might be able to use a DynamoDB list attribute with BatchGetItem. Example: I might have an Image type that stores a larger number of images. Each user needs to pick 3 images. In the DynamoDB record for the user I could store the selected images ID's in a list attribute.

Data Migrations

As your GraphQL types change you will need to migrate data. Typically when this happens you need to find every record of a certain type then update it. Two hacks I've used to reduce the frequency of these updates are:

  1. Returning null and forcing the client to deal with null in a sensible way.
  2. Using the resolver response template to transform the DynamoDB data before sending it to the client.

At some point you're going to need to update data inside DynamoDB. To perform migrations I wrote a script that loads the entire table into memory as an array using the DynamoDB Scan operation. It then looped over every record passing it to a migration function based on the __typename attribute (if found). This function returns the DynamoDB operations that need to be performed to upgrade the record or null if there are none.

This is a simple solution but perfect for adding, removing and updating data.

Comparison to Multiple Table Design

So how does this compare to a multiple table solution like Amplify?

There's surprisingly very little difference.

  1. The number and type of DynamoDB operations is almost the same. The only difference is that you should not Scan a single table solution to return all records of one type.
  2. With on-demand capacity there is almost no price difference.
  3. Both are likely to require updating items when making changes to the schema and can use the hacks I suggested.

The big differences are:

  1. The number of tables you need to manage/monitor.
  2. Multiple return types work better with single table.
  3. Adding and removing DyanmoDB GSI's occurs less frequently with the single table design.

Can You Build a Better Single Table Solution?

Yes.

This solution is designed to be generic and contains compromises to achieve that. By looking at your access patterns you can design a solution that is more efficient.

What Next?

I've already started work on version 2 that will include:

  1. Better support for many to many relations
  2. Delta Sync support
  3. Amplify data store support

I'm also working on a tool to generate a single table SAM backend.

If you want to know more then subscribe to my mailing list below or over at Graphboss.

Latest comments (0)

Read next

manuelfs12 profile image

Setting up a Palworld server in AWS

Manuel Figueroa -

parth7802 profile image

NAT Instance Tutorial

Parth Patel -

acekreations profile image

Processing Images with Web Assembly using wasm-vips

Craig Melville -

edwardmercado profile image

Unveiling the Kubernetes Resume Challenge: A Quest for Professional Growth - Part 1

Edward Allen Mercado -