For those trying to flash to a device from windows, you can use this command if you have the Arduino IDE installed:
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude" -C"C:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf" -v -patmega328p -carduino -PCOM3 -b115200 -D -Uflash:w:C:\Users\path\to\project\rust-arduino-blink\target\avr-atmega328p\debug\rust-arduino-blink.elf:e'
Are you sure you want to hide this comment? It will become hidden in your post, but will still be visible via the comment's permalink.
Hide child comments as well
Confirm
For further actions, you may consider blocking this person and/or reporting abuse
We're a place where coders share, stay up-to-date and grow their careers.
For those trying to flash to a device from windows, you can use this command if you have the Arduino IDE installed:
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude" -C"C:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf" -v -patmega328p -carduino -PCOM3 -b115200 -D -Uflash:w:C:\Users\path\to\project\rust-arduino-blink\target\avr-atmega328p\debug\rust-arduino-blink.elf:e'