I used the fedora 32 x64 you linked to here
this is the file name it downloaded Fedora-Container-Base-32-20201205.0.x86_64.tar.xz I used7zip to decompress it to a tar.
Something weird though. The first time I downloaded it the file ended with the .tar.xz. But now since I originally decompressed it everytime I download it comes as just .tar not .tar.xz in the download directory. I assume its because of 7zip already decompressing it to just a .tar. I hate programs deciding for me how to help grrr...
I insured wsl 2 was the default.
I renamed the decompressed .tar to fedora-32-rootfs.tar
I then created the folder mkdir C:\users\username\wsl\fedora
Next imported the .tar to \wsl\fedora with "wsl --import c:\user\username\download\unzip\fedora-32-rootfs.tar c:\user\username\wsl\fedora\"
I checked and confirmed it was installed in that directory.
Next ran "wsl -d fedora" and after a pause it just returns me to the next line standard prompt in PS. I tried running both as user and admin.
I run "wsl -l -running" and it shows fedora default is running.
I check inside ~\wsl\fedora in Win Explorer and it now shows a ext4 virtual drive
But thats it.
Now I went thru the Win Store and downloaded Ubuntu 18.04 LTS and thru whatever auto .msi it installs it with I get an immediate bash window .Windows installs the ubuntu1804.exe in C:\Users\Username\AppData\Local\Microsoft\WindowsApps directory
It also installed a entire user directory set for Ubuntu in C:\Users\Lenovo\AppData\Local\Packages\CanonicalGroupLimited.Ubuntu18.04onWindows_79rhkp1fndgsc
in PS going to ~\wsl\fedora here is the output of a dir cmd
These are c&p of the text in PS:
PS C:\Users\Lenovo\wsl\fedora> dir
Directory: C:\Users\Lenovo\wsl\fedora
Mode LastWriteTime Length Name
-a---- 12/7/2020 12:00 AM 246415360 ext4.vhdx
PS C:\Users\Lenovo\wsl\fedora>
Then a check to confirm no running distributions followed by the "wsl -d fedora" cmd and as you can see it just returns a standard PS Windows prompt.
These are c&p of the text in PS:
PS C:\Users\Lenovo> wsl -l --running
There are no running distributions.
PS C:\Users\Lenovo> wsl -d fedora
PS C:\Users\Lenovo>
PS C:\Users\Lenovo> wsl -l --running
Windows Subsystem for Linux Distributions:
fedora (Default)
PS C:\Users\Lenovo>
No bash window opened nothing
But if I wait about a minute and then rerun the wsl -l --running I get this
PS C:\Users\Lenovo> wsl -d fedora
PS C:\Users\Lenovo> wsl -l --running
Windows Subsystem for Linux Distributions:
fedora (Default)
PS C:\Users\Lenovo>
The Ubuntu thru the store works fine. In fact I just git gcc compiled and produced a binary for CryFS encryption program which is a updated and secured version EncFS.
I just do not get why Fedora installed manually does not work?? It even shows it as a virtually mounted drive.
I took your recommendation about it maybe an issue with the roofs downloaded. I downloaded the one form the docker link you provided.
I terminated and then unregistered the current not working fedora 32 from December 5,your link in here:
"Find the right "xz" file for your platform (likely x86_64). Such as this one for the December 5, 2020 build of Fedora 33. Or, if you were still wanting Fedora 32, this Fedora 32 build from December 5 should work."
Not sure if you updated that when you edited the article. The one from that link prior to it may be bad as its what did not work.
I followed the docker github link to github.com/fedora-cloud/docker-bre...
and it produced a successful install finally.
PS C:\Users\Lenovo>wsl -t fedora
PS C:\Users\Lenovo>wsl --unregister fedora
PS C:\Users\Lenovo>
PS C:\Users\Lenovo> wsl --import fedora c:\Users\Lenovo\wsl\fedora c:\Users\Lenovo\Downloads\fedora-33-rootfs.tar
PS C:\Users\Lenovo> wsl -l
Windows Subsystem for Linux Distributions:
Ubuntu-18.04 (Default)
fedora
PS C:\Users\Lenovo> wsl --set-default fedora
PS C:\Users\Lenovo> wsl -l --running
There are no running distributions.
PS C:\Users\Lenovo> wsl -l --verbose
NAME STATE VERSION
fedora Stopped 2
Ubuntu-18.04 Stopped 2
PS C:\Users\Lenovo> wsl -d fedora
[root@Lenovo-THINK Lenovo]#
Yes finally a bash prompt.
Thank you very much Jonathan for a well written set of instructions and improving it. Maybe check that current linked fedora 32 download I mentioned and see if it creates a working rootfs. If it works maybe something got corrupted during my download is all I can think of. I did download it twice though and tried both copies but anything is possible I guess. But no matter I have positive results now thanks to your suggestions.
BTW I am using this to see if Qubes OS Ver 4.0 series can be compiled and binary produced using the Windows linux subsystem. It works 100% on a real Fedora 32+ install with all necessary programs loaded. Want to see if it works here as its a rather complex tool and script system for the build environment.
I used the fedora 32 x64 you linked to here
this is the file name it downloaded Fedora-Container-Base-32-20201205.0.x86_64.tar.xz I used7zip to decompress it to a tar.
Something weird though. The first time I downloaded it the file ended with the .tar.xz. But now since I originally decompressed it everytime I download it comes as just .tar not .tar.xz in the download directory. I assume its because of 7zip already decompressing it to just a .tar. I hate programs deciding for me how to help grrr...
I insured wsl 2 was the default.
I renamed the decompressed .tar to fedora-32-rootfs.tar
I then created the folder mkdir C:\users\username\wsl\fedora
Next imported the .tar to \wsl\fedora with "wsl --import c:\user\username\download\unzip\fedora-32-rootfs.tar c:\user\username\wsl\fedora\"
I checked and confirmed it was installed in that directory.
Next ran "wsl -d fedora" and after a pause it just returns me to the next line standard prompt in PS. I tried running both as user and admin.
I run "wsl -l -running" and it shows fedora default is running.
I check inside ~\wsl\fedora in Win Explorer and it now shows a ext4 virtual drive
But thats it.
Now I went thru the Win Store and downloaded Ubuntu 18.04 LTS and thru whatever auto .msi it installs it with I get an immediate bash window .Windows installs the ubuntu1804.exe in C:\Users\Username\AppData\Local\Microsoft\WindowsApps directory
It also installed a entire user directory set for Ubuntu in C:\Users\Lenovo\AppData\Local\Packages\CanonicalGroupLimited.Ubuntu18.04onWindows_79rhkp1fndgsc
after a reboot
in PS going to ~\wsl\fedora here is the output of a dir cmd
These are c&p of the text in PS:
PS C:\Users\Lenovo\wsl\fedora> dir
Directory: C:\Users\Lenovo\wsl\fedora
Mode LastWriteTime Length Name
-a---- 12/7/2020 12:00 AM 246415360 ext4.vhdx
PS C:\Users\Lenovo\wsl\fedora>
Then a check to confirm no running distributions followed by the "wsl -d fedora" cmd and as you can see it just returns a standard PS Windows prompt.
These are c&p of the text in PS:
PS C:\Users\Lenovo> wsl -l --running
There are no running distributions.
PS C:\Users\Lenovo> wsl -d fedora
PS C:\Users\Lenovo>
PS C:\Users\Lenovo> wsl -l --running
Windows Subsystem for Linux Distributions:
fedora (Default)
PS C:\Users\Lenovo>
No bash window opened nothing
But if I wait about a minute and then rerun the wsl -l --running I get this
PS C:\Users\Lenovo> wsl -d fedora
PS C:\Users\Lenovo> wsl -l --running
Windows Subsystem for Linux Distributions:
fedora (Default)
PS C:\Users\Lenovo>
The Ubuntu thru the store works fine. In fact I just git gcc compiled and produced a binary for CryFS encryption program which is a updated and secured version EncFS.
I just do not get why Fedora installed manually does not work?? It even shows it as a virtually mounted drive.
Finally SUCCESS!!!!
I took your recommendation about it maybe an issue with the roofs downloaded. I downloaded the one form the docker link you provided.
I terminated and then unregistered the current not working fedora 32 from December 5,your link in here:
"Find the right "xz" file for your platform (likely x86_64). Such as this one for the December 5, 2020 build of Fedora 33. Or, if you were still wanting Fedora 32, this Fedora 32 build from December 5 should work."
Not sure if you updated that when you edited the article. The one from that link prior to it may be bad as its what did not work.
I followed the docker github link to github.com/fedora-cloud/docker-bre...
and it produced a successful install finally.
PS C:\Users\Lenovo>wsl -t fedora
PS C:\Users\Lenovo>wsl --unregister fedora
PS C:\Users\Lenovo>
PS C:\Users\Lenovo> wsl --import fedora c:\Users\Lenovo\wsl\fedora c:\Users\Lenovo\Downloads\fedora-33-rootfs.tar
PS C:\Users\Lenovo> wsl -l
Windows Subsystem for Linux Distributions:
Ubuntu-18.04 (Default)
fedora
PS C:\Users\Lenovo> wsl --set-default fedora
PS C:\Users\Lenovo> wsl -l --running
There are no running distributions.
PS C:\Users\Lenovo> wsl -l --verbose
NAME STATE VERSION
Ubuntu-18.04 Stopped 2
PS C:\Users\Lenovo> wsl -d fedora
[root@Lenovo-THINK Lenovo]#
Yes finally a bash prompt.
Thank you very much Jonathan for a well written set of instructions and improving it. Maybe check that current linked fedora 32 download I mentioned and see if it creates a working rootfs. If it works maybe something got corrupted during my download is all I can think of. I did download it twice though and tried both copies but anything is possible I guess. But no matter I have positive results now thanks to your suggestions.
BTW I am using this to see if Qubes OS Ver 4.0 series can be compiled and binary produced using the Windows linux subsystem. It works 100% on a real Fedora 32+ install with all necessary programs loaded. Want to see if it works here as its a rather complex tool and script system for the build environment.
Again thank you!
Cheers,
Tim
Excellent! I am glad it is working for you now. I hope your Qubes OS task goes well.