I haven't done any prefromance testing comparing the two, but I would imagine that if there is a difference it's negligible.
Hooks are typically very preformant in general and so are HOC's (depending on how you would them obviously).
Even if the hooks were a few milliseconds slower that the HOC I would still use the hooks for readability and the developer experience.
I feel like there's a lot of people out there who freak out if something takes 100ms instead of 10ms and really, no user is going to notice the difference. Even though 10ms is 10 times faster than 100ms your users are going to notice it. They're not going to be like, "Wow! That's fast!".
Prefromance has its place and is incredibly important, but I think readability and developer experience is more important than small boosts in preformance. You're likely to get a lot more preformance out of optimizing the photos on your page than you would from switching from a HOC to hook.
I'm asking because I remember having read an article quite long ago where the author elaborated on how "connect" was optimized for performance in all kinds of subtle and complicated ways, and how it was difficult to pull off the same with hooks.
BUT, I suspect that that was based on the state of the art back then when hooks were brand new, and I guess that the hooks that you mention did not even exist at that time! In other words, the author described how to replace "connect" with the generic hooks available then and the performance issues it caused.
Probably these new "Redux specific" hooks were created to address just that, the new hooks being a 1:1 drop-in replacement for 'connect', delivering the same performance and benefits, just with a different syntax ... so probably this is no longer an issue.
Haha but I sent you the wrong article! That article from Eric Elliot is more a grab bag of ideas and he doesn't do an in-depth comparison of Connect vs the Redux hooks ... I was confused, and the article I really meant is this one:
This article goes into great depth comparing the performance of Connect with the Redux hooks in various scenarios.
It all revolves around the overhead of causing unnecessary re-renders, and he shows how to "measure" that. And, what he claims is that Connect is doing automatic 'referential caching', which would also be possible with the hooks but it's not "built in".
In his summary titled So should I start using the Redux Hooks? he says that:
"When you move away from connect you lose a lot of the performance benefits it provides ... this means that you’ll have to be more cautious when considering re-renders"
But to determine if this claim is justified (and what it means) you'll have to read the rest of the article.
You can read Eric Elliott's article if you like, however the one I meant was in fact this one!
You can do it all on your own, which does defeat the purpose of connect doing it for you. Although, the fixes to get same preformances aren't difficult, and those fixes would make other things in your app more preformant. So there's that.
Unless you're REALLY into getting optimal preformance, I don't think the rerenders you loose out on are going to really slow your app down.
I think if it comes down to improving your rerenders your going to use useMemo anyways.
Right, so if you grasp how it works then without too much difficulty you can obtain virtually the same performance, and you're learning something useful in the process (you'd gain a deeper understanding) ... if I'd ever attempt this stuff then I'd re-read that article first!
I haven't done any prefromance testing comparing the two, but I would imagine that if there is a difference it's negligible.
Hooks are typically very preformant in general and so are HOC's (depending on how you would them obviously).
Even if the hooks were a few milliseconds slower that the HOC I would still use the hooks for readability and the developer experience.
I feel like there's a lot of people out there who freak out if something takes 100ms instead of 10ms and really, no user is going to notice the difference. Even though 10ms is 10 times faster than 100ms your users are going to notice it. They're not going to be like, "Wow! That's fast!".
Prefromance has its place and is incredibly important, but I think readability and developer experience is more important than small boosts in preformance. You're likely to get a lot more preformance out of optimizing the photos on your page than you would from switching from a HOC to hook.
I'm asking because I remember having read an article quite long ago where the author elaborated on how "connect" was optimized for performance in all kinds of subtle and complicated ways, and how it was difficult to pull off the same with hooks.
BUT, I suspect that that was based on the state of the art back then when hooks were brand new, and I guess that the hooks that you mention did not even exist at that time! In other words, the author described how to replace "connect" with the generic hooks available then and the performance issues it caused.
Probably these new "Redux specific" hooks were created to address just that, the new hooks being a 1:1 drop-in replacement for 'connect', delivering the same performance and benefits, just with a different syntax ... so probably this is no longer an issue.
But in case you're interested, here's that article (it's from July 2019):
medium.com/javascript-scene/do-rea...
Erratum:
The link above was in fact not the article I had in mind, the one I meant is this one:
itnext.io/how-existing-redux-patte...
That's cool! I'm going to check into that. Thanks for sharing!🔥
Haha but I sent you the wrong article! That article from Eric Elliot is more a grab bag of ideas and he doesn't do an in-depth comparison of Connect vs the Redux hooks ... I was confused, and the article I really meant is this one:
itnext.io/how-existing-redux-patte...
This article goes into great depth comparing the performance of Connect with the Redux hooks in various scenarios.
It all revolves around the overhead of causing unnecessary re-renders, and he shows how to "measure" that. And, what he claims is that Connect is doing automatic 'referential caching', which would also be possible with the hooks but it's not "built in".
In his summary titled So should I start using the Redux Hooks? he says that:
"When you move away from connect you lose a lot of the performance benefits it provides ... this means that you’ll have to be more cautious when considering re-renders"
But to determine if this claim is justified (and what it means) you'll have to read the rest of the article.
You can read Eric Elliott's article if you like, however the one I meant was in fact this one!
P.S. so you think he has a point that Connect still has potential advantages with its "baked in intelligence" to prevent re-renders?
You can do it all on your own, which does defeat the purpose of connect doing it for you. Although, the fixes to get same preformances aren't difficult, and those fixes would make other things in your app more preformant. So there's that.
Unless you're REALLY into getting optimal preformance, I don't think the rerenders you loose out on are going to really slow your app down.
I think if it comes down to improving your rerenders your going to use useMemo anyways.
Right, so if you grasp how it works then without too much difficulty you can obtain virtually the same performance, and you're learning something useful in the process (you'd gain a deeper understanding) ... if I'd ever attempt this stuff then I'd re-read that article first!
Definitely. useMemo is a great hook to learn too. If your into rerender optimization, check out React hook from. It does some pretty cool stuff!
Ah you mean React Hook Form? react-hook-form.com/
Oh, yeah!