DEV Community

Cover image for PhpStorm, Docker and Xdebug 3 on PHP 8.1 in 2022 [Tutorial Part 3]
Pascal Landau
Pascal Landau

Posted on • Updated on • Originally published at pascallandau.com

PhpStorm, Docker and Xdebug 3 on PHP 8.1 in 2022 [Tutorial Part 3]

This article appeared first on https://www.pascallandau.com/ at PhpStorm, Docker and Xdebug 3 on PHP 8.1 in 2022 [Tutorial Part 3]


In this part of the tutorial series on developing PHP on Docker we will setup our local development environment to be used by PhpStorm and Xdebug. We will also ensure that we can run PHPUnit tests from the command line as well as from PhpStorm and throw the tool strace into the mix for debugging long running processes.

All code samples are publicly available in my Docker PHP Tutorial repository on Github. You find the branch for this tutorial at part-4-2-phpstorm-docker-xdebug-3-php-8-1-in-2022

All published parts of the Docker PHP Tutorial are collected under a dedicated page at Docker PHP Tutorial. The previous part was Docker from scratch for PHP 8.1 Applications in 2022 and the following one is Run Laravel 9 on Docker in 2022.

If you want to follow along, please subscribe to the RSS feed or via email to get automatic notifications when the next part comes out :)

Table of contents

Introduction

This article is mostly an update of Setting up PhpStorm with Xdebug for local development on Docker but will also cover the "remaining cases" of debugging php-fpm and php worker processes.

We will still rely on an always-running docker setup that we connect to via an SSH Configuration instead of using the built-in docker-compose capabilities as I feel it's closer to what we do in CI / production. However, we will not use SSH keys any longer but simply authenticate via password. This reduces complexity and removes any pesky warnings regarding "SSH keys being exposed in a repository".

Install Tools

Install composer Composer is installed by pulling the official composer docker image and simply "copying" the composer executable over to the base php image. In addition, composer needs the extensions mbstring and phar

# File: .docker/images/php/base/Dockerfile

ARG ALPINE_VERSION
ARG COMPOSER_VERSION
FROM composer:${COMPOSER_VERSION} as composer
FROM alpine:${ALPINE_VERSION} as base

# ...

RUN apk add --update --no-cache  \
        php-mbstring~=${TARGET_PHP_VERSION} \
        php-phar~=${TARGET_PHP_VERSION} \

# ...

COPY --from=composer /usr/bin/composer /usr/local/bin/composer
Enter fullscreen mode Exit fullscreen mode

Because we want our build to be deterministic, we "pin" the composer version by adding a COMPOSER_VERSION variable to the .docker/.env file

COMPOSER_VERSION=2.2.5
Enter fullscreen mode Exit fullscreen mode

and using it in .docker/docker-compose/docker-compose-php-base.yml:

services:
  php-base:
    build:
      args:
        - COMPOSER_VERSION=${COMPOSER_VERSION?}
Enter fullscreen mode Exit fullscreen mode

Install Xdebug Install the extension via apk (only for the local target):

# File: .docker/images/php/base/Dockerfile

FROM base as local

RUN apk add --no-cache --update \
        php-xdebug~=${TARGET_PHP_VERSION} \
    # ensure that xdebug is not enabled by default
    && rm -f /etc/php8/conf.d/00_xdebug.ini
Enter fullscreen mode Exit fullscreen mode

We also don't want to enable xdebug immediately but only when we need it (due to the decrease in performance when the extension is enabled), hence we remove the default config file and disable the extension in the application .ini file

# File: .docker/images/php/base/conf.d/zz-app-local.ini

; Note:
; Remove the comment ; to enable debugging
;zend_extension=xdebug
xdebug.client_host=host.docker.internal
xdebug.start_with_request=yes
xdebug.mode=debug
Enter fullscreen mode Exit fullscreen mode

See Fix Xdebug on PhpStorm when run from a Docker container for an explanation of the xdebug.client_host=host.docker.internal setting (previously called xdebug.remote_host in xdebug < 3). This will still work out of the box for Docker Desktop, but for Linux users we need to add the host-gateway magic reference
to all PHP containers (we can't add it to the php base image because this is a runtime setting):

services:
  service:
    extra_hosts:
      - host.docker.internal:host-gateway
Enter fullscreen mode Exit fullscreen mode

Finally, we need to add the environment variable PHP_IDE_CONFIG
to all PHP containers. The variable is defined as PHP_IDE_CONFIG=serverName=dofroscra, where "dofroscra" is the name of the server that we will configure later for debugging. Because we need the same value in multiple places, the variable is configured in .docker/.env:

PHP_IDE_CONFIG=serverName=dofroscra
Enter fullscreen mode Exit fullscreen mode

And then added in .docker/docker-compose/docker-compose.local.yml

services:
  php-fpm:
    environment:
      - PHP_IDE_CONFIG=${PHP_IDE_CONFIG?}

  php-worker:
    environment:
      - PHP_IDE_CONFIG=${PHP_IDE_CONFIG?}

  application:
    environment:
      - PHP_IDE_CONFIG=${PHP_IDE_CONFIG?}
Enter fullscreen mode Exit fullscreen mode

Install PHPUnit PHPUnit will be installed via composer but will not be "baked into the image" for local development. Thus, we must run composer require in the container. To make this more convenient a make target for running arbitrary composer commands is added in .make/01-00-application-setup.mk:

.PHONY: composer
composer: ## Run composer commands. Specify the command e.g. via ARGS="install"
    $(EXECUTE_IN_APPLICATION_CONTAINER) composer $(ARGS);
Enter fullscreen mode Exit fullscreen mode

This allows me to run make composer ARGS="install" from the host system to execute composer install in the container. In consequence, composer will use the PHP version and extensions of the application container to install the dependencies, yet I will still see the installed files locally because the codebase is configured as a volume for the container.

Before installing phpunit, we must add the required extensions dom and xml to the container

# File: .docker/images/php/base/Dockerfile

# ...

RUN apk add --update --no-cache  \
        php-dom~=${TARGET_PHP_VERSION} \
        php-xml~=${TARGET_PHP_VERSION} \
Enter fullscreen mode Exit fullscreen mode

as well as rebuild and restart the docker setup via

make docker-build
make docker-down
make docker-up
Enter fullscreen mode Exit fullscreen mode

Now we can add phpunit via

make composer ARGS='require "phpunit/phpunit"'
Enter fullscreen mode Exit fullscreen mode

which will create a composer.json file and setup up the vendor/ directory:

$ make composer ARGS='require "phpunit/phpunit"'
Using version ^9.5 for phpunit/phpunit
./composer.json has been created
Running composer update phpunit/phpunit
Loading composer repositories with package information
Updating dependencies
...
Enter fullscreen mode Exit fullscreen mode

CAUTION: If you run into the following permission error at this step, you are likely using Linux and haven't set the APP_USER_ID and APP_GROUP_ID variables as described in the previous article under Solving permission issues.

make composer ARGS='req phpunit/phpunit' ENV=local TAG=latest DOCKER_REGISTRY=docker.io DOCKER_NAMESPACE=dofroscra APP_USER_NAME=application APP_GROUP_NAME=application docker-compose -p dofroscra_local --env-file ./.docker/.env -f ./.docker/docker-compose/docker-compose.yml -f ./.docker/docker-compose/docker-compose.local.yml exec -T --user application application composer req phpunit/phpunit
./composer.json is not writable.
make: *** [.make/01-00-application-setup.mk:14: composer] Error 1
Enter fullscreen mode Exit fullscreen mode

I have also added

  • a minimal phpunit.xml config file
  • a test case at tests/SomeTest.php
  • and a new Makefile for "anything related to qa" at .make/01-02-application-qa.mk:
##@ [Application: QA]

.PHONY: test
test: ## Run the test suite 
    $(EXECUTE_IN_WORKER_CONTAINER) vendor/bin/phpunit -c phpunit.xml
Enter fullscreen mode Exit fullscreen mode

So I can run tests simply via make test

$ make test
ENV=local TAG=latest DOCKER_REGISTRY=docker.io DOCKER_NAMESPACE=dofroscra APP_USER_NAME=application APP_GROUP_NAME=application docker-compose -p dofroscra_local --env-file ./.docker/.env -f ./.docker/docker-compose/docker-compose.yml -f ./.docker/docker-compose/docker-compose.local.yml exec -T --user application php-worker vendor/bin/phpunit
PHPUnit 9.5.13 by Sebastian Bergmann and contributors.

.                                                                   1 / 1 (100%)

Time: 00:00.324, Memory: 4.00 MB

OK (1 test, 1 assertion)
Enter fullscreen mode Exit fullscreen mode

Install SSH

We will execute commands from PhpStorm via ssh in the application container. As mentioned, we won't use a key file for authentication but will instead simply use a password that is configured via the APP_SSH_PASSWORD variable in .docker/.env and passed to the image in .docker/docker-compose/docker-compose.local.yml. In addition, we map port 2222 from the host system to port 22 of the application container and make sure that the codebase is shared as a volume between host and container

  application:
    build:
      args:
        - APP_SSH_PASSWORD=${APP_SSH_PASSWORD?}
    volumes:
      - ${APP_CODE_PATH_HOST?}:${APP_CODE_PATH_CONTAINER?}
    ports:
      - "${APPLICATION_SSH_HOST_PORT:-2222}:22"
Enter fullscreen mode Exit fullscreen mode

The container already contains openssh and sets the password

ARG BASE_IMAGE
FROM ${BASE_IMAGE} as base

FROM base as local

RUN apk add --no-cache --update \
        openssh

ARG APP_SSH_PASSWORD
RUN echo "$APP_USER_NAME:$APP_SSH_PASSWORD" | chpasswd 2>&1

# Required to start sshd, otherwise the container will error out on startup with the message
# "sshd: no hostkeys available -- exiting."
# @see https://stackoverflow.com/a/65348102/413531 
RUN ssh-keygen -A

# we use SSH deployment configuration in PhpStorm for local development
EXPOSE 22

CMD ["/usr/sbin/sshd", "-D"]
Enter fullscreen mode Exit fullscreen mode

Setup PhpStorm

We will configure a remote PHP interpreter that uses an SSH connection to run commands in the application container. Before, we have been using an SFTP Deployment configuration , which was kinda confusing ("What is SFTP doing here?"), so we will use an SSH Configuration instead and configure the path mappings in the Cli Interpreter interface

SSH Configuration

At File | Settings | Tools | SSH Configurations create a new SSH Configuration named "Docker PHP Tutorial" with the following settings

  • Host: 127.0.0.1
  • Port: see APPLICATION_SSH_HOST_PORT in .docker/docker-compose/docker-compose.local.yml
  • User name: see APP_USER_NAME in .make/.env
  • Authentication type: Password
  • Password: see APP_SSH_PASSWORD in .docker/.env

PhpStorm SSH Configuration

PHP Interpreter

At File | Settings | PHP add a new PHP CLI interpreter that uses the new SSH Configuration

PhpStorm new CLI interpreter

In addition, we define the path to the xdebug extension because it is disabled by default but PhpStorm can enable it automatically if required. You can find the path in the application container via

root:/var/www/app# php -i | grep extension_dir
extension_dir => /usr/lib/php8/modules => /usr/lib/php8/modules
root:/var/www/app# ll /usr/lib/php8/modules | grep xdebug
-rwxr-xr-x    1 root     root        303936 Jan  9 00:21 xdebug.so
Enter fullscreen mode Exit fullscreen mode

We still need to Fix Xdebug on PhpStorm when run from a Docker container by adding a custom PHP option for xdebug.client_host=host.docker.internal. That's the same value we use in .docker/images/php/base/conf.d/zz-app-local.ini.

PhpStorm Xdebug settings for the CLI interpreter

In the interpreter overview we must now configure the path mappings so that PhpStorm knows "which local file belongs to which remote one". The remote folder is defined in .docker/.env via

APP_CODE_PATH_CONTAINER=/var/www/app
Enter fullscreen mode Exit fullscreen mode

PhpStorm path mappings for the CLI interpreter

Afterwards we can set a breakpoint e.g. in setup.php and start debugging:

PhpStorm debugging breakpoint

The screenshot shows that PhpStorm adds the Xdebug extension that we defined previously.

PHPUnit

phpunit is configured via File | Settings | PHP | Test Frameworks. First, we select the interpreter that we just added

Set up phpunit in PhpStorm

Then, we add the paths to the composer autoload script and the phpunit.xml configuration file.

phpunit settings in PhpStorm

PhpStorm will now execute tests using the PHP interpreter in the application container

Run a phpunit test in PhpStorm

Debugging

First of all, if you haven't already please also take a look at the official xdebug documentation. Derick is doing a great job at explaining xdebug in detail including some helpful videos like Xdebug 3: Xdebug with Docker and PhpStorm in 5 minutes

Debug code executed via PhpStorm

This should already work out of the box. Simply set a break point, right-click on a file and choose "Debug '...'"

PhpStorm debugging breakpoint

Debug code executed via php-fpm, cli or from a worker

For code that is executed "directly" by a container without PhpStorm, we first need to enable xdebug in the container by removing the ; in front of the extension in /etc/php8/conf.d/zz-app-local.ini

; Note:
; Remove the comment ; to enable debugging
zend_extension=xdebug
Enter fullscreen mode Exit fullscreen mode

To make this a little more convenient, we use dedicated make recipes for those actions in .make/01-01-application-commands.mk

.PHONY: execute-in-container
execute-in-container: ## Execute a command in a container. E.g. via "make execute-in-container DOCKER_SERVICE_NAME=php-fpm COMMAND="echo 'hello'"
    @$(if $(DOCKER_SERVICE_NAME),,$(error DOCKER_SERVICE_NAME is undefined))
    @$(if $(COMMAND),,$(error COMMAND is undefined))
    $(EXECUTE_IN_CONTAINER) $(COMMAND);

.PHONY: enable-xdebug
enable-xdebug: ## Enable xdebug in the given container specified by "DOCKER_SERVICE_NAME". E.g. "make enable-xdebug DOCKER_SERVICE_NAME=php-fpm"
    "$(MAKE)" execute-in-container APP_USER_NAME="root" DOCKER_SERVICE_NAME=$(DOCKER_SERVICE_NAME) COMMAND="sed -i 's/.*zend_extension=xdebug/zend_extension=xdebug/' '/etc/php8/conf.d/zz-app-local.ini'"

.PHONY: disable-xdebug
disable-xdebug: ## Disable xdebug in the given container specified by "DOCKER_SERVICE_NAME". E.g. "make enable-xdebug DOCKER_SERVICE_NAME=php-fpm"
    "$(MAKE)" execute-in-container APP_USER_NAME="root" DOCKER_SERVICE_NAME=$(DOCKER_SERVICE_NAME) COMMAND="sed -i 's/.*zend_extension=xdebug/;zend_extension=xdebug/' '/etc/php8/conf.d/zz-app-local.ini'"
Enter fullscreen mode Exit fullscreen mode

To capture incoming requests, we need to make PhpStorm listen for PHP Debug connections via Run | Start Listening for PHP Debug Connections.

PhpStorm: Start Listening for PHP Debug Connections

The corresponding ports are configured at File | Settings | PHP | Debug. In Xdebug < 3 the default port was 9000 and in Xdebug 3 it is 9003

PhpStorm: configure xdebug ports

Finally, we need to add a server via File | Settings | PHP | Servers

PhpStorm: configure a server

The name of the server must match the value of the serverName key in the environment variable PHP_IDE_CONFIG that we configured previously as serverName=dofroscra.

php-fpm

For php-fpm we must restart the php-fpm process without restarting the container after we have activated xdebug via

kill -USR2 1
Enter fullscreen mode Exit fullscreen mode

Since this is a pain to remember, we add a make target in .make/01-01-application-commands.mk

# @see https://stackoverflow.com/a/43076457
.PHONY: restart-php-fpm
restart-php-fpm: ## Restart the php-fpm service
    "$(MAKE)" execute-in-container DOCKER_SERVICE_NAME=$(DOCKER_SERVICE_NAME_PHP_FPM) COMMAND="kill -USR2 1"
Enter fullscreen mode Exit fullscreen mode

So we can now simply run

make enable-xdebug DOCKER_SERVICE_NAME=php-fpm
make restart-php-fpm
Enter fullscreen mode Exit fullscreen mode

Setting a breakpoint in public/index.php and opening http://127.0.0.1/ in a browser or via curl http://127.0.0.1/ will halt the execution as expected.

PhpStorm debugging breakpoint for php-fpm

cli

Instead of triggering a PHP script via HTTP request, we can also run CLI scripts - think of the make setup-db target for instance. To debug such invocations, we need to follow the same steps as before:

  • enable the xdebug extension in the application container
  • "Listening for PHP Debug Connections" from PhpStorm

Running the following make targets will trigger a breakpoint in setup.php:

make enable-xdebug DOCKER_SERVICE_NAME=application
make setup-db
Enter fullscreen mode Exit fullscreen mode

PhpStorm debugging breakpoint for cli

php-workers

And finally the same thing for long running PHP processes (aka workers). Just as before:

  • enable the xdebug extension in the php-worker container
  • "Listening for PHP Debug Connections" from PhpStorm
  • restart the php workers

Running the following make targets will trigger a breakpoint in worker.php:

make enable-xdebug DOCKER_SERVICE_NAME=php-worker
make restart-workers
Enter fullscreen mode Exit fullscreen mode

PhpStorm debugging breakpoint for php-workers

strace

strace is a great tool for debugging long running processes that I've adopted after reading What is PHP doing?. I've added it to the php base image:

RUN apk add --update --no-cache \
        strace
Enter fullscreen mode Exit fullscreen mode

You can attach to any running process via sudo strace -p $processId - BUT that doesn't work out of the box on docker and will fail with the error message

strace: attach: ptrace(PTRACE_SEIZE, 1): Operation not permitted
Enter fullscreen mode Exit fullscreen mode

This is caused by a security measure from docker and can be circumvented by adding

services:
  service:
    cap_add:
      - "SYS_PTRACE"
    security_opt:
      - "seccomp=unconfined"
Enter fullscreen mode Exit fullscreen mode

in .docker/docker-compose/docker-compose.local.yml to all PHP containers. After rebuilding and restarting the docker setup, you can now e.g. log in the php-worker container and run strace on a php worker process:

application:/var/www/app# ps aux
PID   USER     TIME  COMMAND
    1 applicat  0:00 {supervisord} /usr/bin/python3 /usr/bin/supervisord
    7 applicat  0:00 php /var/www/app/worker.php
    8 applicat  0:00 php /var/www/app/worker.php
    9 applicat  0:00 php /var/www/app/worker.php
   10 applicat  0:00 php /var/www/app/worker.php
   11 applicat  0:00 bash
   20 applicat  0:00 ps aux
application:/var/www/app# sudo strace -p 7
strace: Process 7 attached
restart_syscall(<... resuming interrupted read ...>) = 0
poll([{fd=4, events=POLLIN|POLLPRI|POLLERR|POLLHUP}], 1, 0) = 0 (Timeout)
sendto(4, "*2\r\n$4\r\nRPOP\r\n$5\r\nqueue\r\n", 25, MSG_DONTWAIT, NULL, 0) = 25
poll([{fd=4, events=POLLIN|POLLPRI|POLLERR|POLLHUP}], 1, 0) = 1 ([{fd=4, revents=POLLIN}])
recvfrom(4, "$", 1, MSG_PEEK, NULL, NULL) = 1
Enter fullscreen mode Exit fullscreen mode

Wrapping up

Congratulations, you made it! If some things are not completely clear by now, don't hesitate to leave a comment. Apart from that, you should now have a fully configured development setup that works with PhpStorm as your IDE.

In the next part of this tutorial, we will use a fresh installation of Laravel on top of our setup.

Please subscribe to the RSS feed or via email to get automatic notifications when this next part comes out :)

Top comments (4)

Collapse
 
pascallandau profile image
Pascal Landau

Feedback appreciated :)

Collapse
 
leslieeeee profile image
Leslie

If you are a macOS user, ServBay.dev is worth to try. You don't need to spend some time or couple of days to setup anything. Just download it and you can use it immediately. You can run multiple PHP versions simultaneously and switch between them effortlessly.
Honestly, this tool has greatly simplified my PHP development and is definitely worth trying!

Collapse
 
yatsenkolesh profile image
Alex Yatsenko

Really helpful. Will it work on Mac OS ?

Collapse
 
pascallandau profile image
Pascal Landau

Yes, works on all at OS