DEV Community

Bambang Purnomosidi D. P. for Zimera Corporation

Posted on • Updated on

Multiple .NET SDKs and Runtimes Installation

As a beginner in Microsoft ecosystem, especially under Linux, I found a little bit difficult to get everything works as expected. Last week, I tried to get WebSharper up and run but turns out I can not get it worked. I probably will write about this later. The solution is pretty simple: I need to have .NET SDK - LTS version (3.1.x) while I only have Current version (5.x.x).

So yes, I have to install more than one SDKs and Runtimes. How to do that? dotnet command - AFAIK - can not be used to do that. The answer is dotnet-install scripts - available for Windows and for Bash shell. Using this install script, I can install more than one SDK and Runtimes. Here's how.

Install LTS Version First

  • The argument --install-dir is used to let installer knows the installation directory.
  • The argument -c LTS means that we will install latest version from LTS channel
dotnet-install.sh --install-dir ~/software/dotnet-dev-tools/dotnet-all -c LTS
dotnet-install: Note that the intended use of this script is for Continuous Integration (CI) scenarios, where:
dotnet-install: - The SDK needs to be installed without user interaction and without admin rights.
dotnet-install: - The SDK installation doesn't need to persist across multiple CI runs.
dotnet-install: To set up a development environment or to run apps, use installers rather than this script. Visit https://dotnet.microsoft.com/download to get the installer.

dotnet-install: Downloading primary link https://dotnetcli.azureedge.net/dotnet/Sdk/3.1.413/dotnet-sdk-3.1.413-linux-x64.tar.gz
dotnet-install: Extracting zip from https://dotnetcli.azureedge.net/dotnet/Sdk/3.1.413/dotnet-sdk-3.1.413-linux-x64.tar.gz
dotnet-install: Adding to current process PATH: `/home/bpdp/software/dotnet-dev-tools/dotnet-all`. Note: This change will be visible only when sourcing script.
dotnet-install: Note that the script does not resolve dependencies during installation.
dotnet-install: To check the list of dependencies, go to https://docs.microsoft.com/dotnet/core/install, select your operating system and check the "Dependencies" section.
dotnet-install: Installation finished successfully.
$
Enter fullscreen mode Exit fullscreen mode

Install Current Version

Install current version at the same directory location

$ dotnet-install.sh --install-dir ~/software/dotnet-dev-tools/dotnet-all -c Current
dotnet-install: Note that the intended use of this script is for Continuous Integration (CI) scenarios, where:
dotnet-install: - The SDK needs to be installed without user interaction and without admin rights.
dotnet-install: - The SDK installation doesn't need to persist across multiple CI runs.
dotnet-install: To set up a development environment or to run apps, use installers rather than this script. Visit https://dotnet.microsoft.com/download to get the installer.

dotnet-install: Downloading primary link https://dotnetcli.azureedge.net/dotnet/Sdk/5.0.207/dotnet-sdk-5.0.207-linux-x64.tar.gz
dotnet-install: Extracting zip from https://dotnetcli.azureedge.net/dotnet/Sdk/5.0.207/dotnet-sdk-5.0.207-linux-x64.tar.gz
dotnet-install: Adding to current process PATH: `/home/bpdp/software/dotnet-dev-tools/dotnet-all`. Note: This change will be visible only when sourcing script.
dotnet-install: Note that the script does not resolve dependencies during installation.
dotnet-install: To check the list of dependencies, go to https://docs.microsoft.com/dotnet/core/install, select your operating system and check the "Dependencies" section.
dotnet-install: Installation finished successfully.
$
Enter fullscreen mode Exit fullscreen mode

Install versi beta / RC

Jika ingin melakukan instalasi untuk versi yang belum rilis resmi, gunakan channel sesuai dengan nomor rilis versi beta / RC tersebut. Sebagai contoh, saat penulisan artikel ini, versi beta / RC adalah versi 6.0.100-rc1. Berikut ini adalah tampilan saat instalasi:

$ dotnet-install.sh --install-dir ~/software/dotnet-dev-tools/dotnet-all -c 6.0
dotnet-install: Note that the intended use of this script is for Continuous Integration (CI) scenarios, where:
dotnet-install: - The SDK needs to be installed without user interaction and without admin rights.
dotnet-install: - The SDK installation doesn't need to persist across multiple CI runs.
dotnet-install: To set up a development environment or to run apps, use installers rather than this script. Visit https://dotnet.microsoft.com/download to get the installer.

dotnet-install: Downloading primary link https://dotnetcli.azureedge.net/dotnet/Sdk/6.0.100-rc.1.21458.32/dotnet-sdk-6.0.100-rc.1.21458.32-linux-x64.tar.gz
dotnet-install: Extracting zip from https://dotnetcli.azureedge.net/dotnet/Sdk/6.0.100-rc.1.21458.32/dotnet-sdk-6.0.100-rc.1.21458.32-linux-x64.tar.gz
dotnet-install: Adding to current process PATH: `/home/bpdp/software/dotnet-dev-tools/dotnet-all`. Note: This change will be visible only when sourcing script.
dotnet-install: Note that the script does not resolve dependencies during installation.
dotnet-install: To check the list of dependencies, go to https://docs.microsoft.com/dotnet/core/install, select your operating system and check the "Dependencies" section.
dotnet-install: Installation finished successfully.
$
Enter fullscreen mode Exit fullscreen mode

Innstallation Check

Now, when we use --info as dotnet CLI argument, we will have those 2 SDKs and 2 Runtimes already installed:

$ dotnet --info
.NET SDK (reflecting any global.json):
 Version:   6.0.100-rc.1.21458.32
 Commit:    d7c22323c4

Runtime Environment:
 OS Name:     devuan
 OS Version:  4
 OS Platform: Linux
 RID:         linux-x64
 Base Path:   /home/bpdp/software/dotnet-dev-tools/dotnet-all/sdk/6.0.100-rc.1.21458.32/

Host (useful for support):
  Version: 6.0.0-rc.1.21451.13
  Commit:  d7619cd4b1

.NET SDKs installed:
  3.1.413 [/home/bpdp/software/dotnet-dev-tools/dotnet-all/sdk]
  5.0.207 [/home/bpdp/software/dotnet-dev-tools/dotnet-all/sdk]
  6.0.100-rc.1.21458.32 [/home/bpdp/software/dotnet-dev-tools/dotnet-all/sdk]

.NET runtimes installed:
  Microsoft.AspNetCore.App 3.1.19 [/home/bpdp/software/dotnet-dev-tools/dotnet-all/shared/Microsoft.AspNetCore.App]
  Microsoft.AspNetCore.App 5.0.10 [/home/bpdp/software/dotnet-dev-tools/dotnet-all/shared/Microsoft.AspNetCore.App]
  Microsoft.AspNetCore.App 6.0.0-rc.1.21452.15 [/home/bpdp/software/dotnet-dev-tools/dotnet-all/shared/Microsoft.AspNetCore.App]
  Microsoft.NETCore.App 3.1.19 [/home/bpdp/software/dotnet-dev-tools/dotnet-all/shared/Microsoft.NETCore.App]
  Microsoft.NETCore.App 5.0.10 [/home/bpdp/software/dotnet-dev-tools/dotnet-all/shared/Microsoft.NETCore.App]
  Microsoft.NETCore.App 6.0.0-rc.1.21451.13 [/home/bpdp/software/dotnet-dev-tools/dotnet-all/shared/Microsoft.NETCore.App]

To install additional .NET runtimes or SDKs:
  https://aka.ms/dotnet-download
$
Enter fullscreen mode Exit fullscreen mode

Now, we can use LTS, Current, and beta / RC version altogether. Enjoy!

Top comments (0)