DEV Community

Divine Odazie for EverythingDevOps

Posted on • Updated on • Originally published at everythingdevops.dev

How to restart Kubernetes Pods with kubectl

This article was originally posted on Everything DevOps.

Anyone who has used Kubernetes for an extended period of time will know that things don’t always go as smoothly as you’d like. In production, unexpected things happen, and Pods can crash or fail in some unforeseen way. When this happens, you need a reliable way to restart the Pods.

Restarting a pod is not the same as restarting a container, as a Pod is not a process but an environment for running container(s). A Pod persists until it finishes execution, is deleted, is evicted for lack of resources, or its host node fails.

This article will list 4 scenarios where you might want to restart a Kubernetes Pod and walk you through methods to restart Pods with kubectl.

4 scenarios where you might want to restart a Pod

There are several scenarios where you neeed to restart a Pod. The following are 4 of them:

  1. Unexpected errors such as “Pods stuck in an inactive state” (e.g., pending), “Out of Memory” (occurs Pods try to go beyond the memory limits set in your manifest file), etc.

  2. To easily upgrade a Pod with a newly-pushed container image if you previously set the PodSpec imagePullPolicy to Always.

  3. To update configurations and secrets.

  4. You would want to restart Pods when the application running in the Pod has a corrupted internal state that needs to be cleared.

Now you’ve seen some scenarios where you might want to restart a Pod. Next, you will learn how to restart Pods with kubectl.

Restarting Kubernetes pods with kubectl

kubectl, by design, doesn’t have a direct command for restarting Pods. Because of this, to restart Pods with kubectl, you have to use one of the following methods:

  • Restarting Kubernetes Pods by changing the number of replicas with kubectl scale command
  • Downtimeless restarts with kubectl rollout restart command
  • Automatic restarts by updating the Pod’s environment variable
  • Restarting Pods by deleting them ## Prerequisites

Before you learn how to use each of the above methods, ensure you have the following prerequisites:

  • A Kubernetes cluster. The demo in this article was done using minikube — a single Node Kubernetes cluster.
  • The kubectl command-line tool configured to communicate with the cluster.

For demo purposes, in any desired directory, create a httpd-deployment.yaml file with replicas set to 2 using the following YAML configurations:

apiVersion: apps/v1
kind: Deployment
metadata:
  name: httpd-deployment
  labels:
    app: httpd
spec:
  replicas: 2
  selector:
    matchLabels:
      app: httpd
  template:
    metadata:
      labels:
        app: httpd
    spec:
      containers:
      - name: httpd-pod
        image: httpd:latest
Enter fullscreen mode Exit fullscreen mode

In your terminal, change to the directory where you saved the deployment file, and run:

$ kubectl apply -f httpd-deployment.yaml
Enter fullscreen mode Exit fullscreen mode

The above command will create the httpd deployment with two pods. To verify the number of Pods, run the $ kubectl get pods command.

Creating and verifying an httpd deployment with kubectl

Now you have the Pods of the httpd deployment running. Next, you will use each of the methods outlined earlier to restart the Pods.

Restarting Kubernetes Pods by changing the number of replicas

In this method of restarting Kubernetes Pods, you scale the number of the deployment replicas down to zero, which stops and terminates all the Pods. Then you scale them back up to the desired state, which initializes new pods.

Note: It is important to note that when you set the number of replicas to zero, seeing the Pods stop running, there will be some application downtime.

To scale down the httpd deployment replicas you created, run the following kubectl scale command:

$ kubectl scale deployment httpd-deployment --replicas=0
Enter fullscreen mode Exit fullscreen mode

The above command will show an output indicating that Pods have been scaled, as shown in the image below.

Scaling Pods down

To confirm that the pods were stopped and terminated, run $ kubectl get pods, and you should get the “No resources are found in default namespace” message.

Showing Pods

To scale up the replicas, run the same kubectl scale, but this time with --replicas=2.

$ kubectl scale deployment httpd-deployment --replicas=2
Enter fullscreen mode Exit fullscreen mode

After running the above command, to verify the number of pods running, run:

$ kubectl get pods
Enter fullscreen mode Exit fullscreen mode

And you should see each Pod back up and running after restarting, as in the image below.

Scaling Pods up

Downtimeless restarts with Rollout restart

In the previous method, you scaled down the number of replicas to zero to restart the Pods; doing so caused an outage and downtime of the application. To restart without any outage and downtime, use the kubectl rollout restart command, which restarts the Pods one by one without impacting the deployment.

To use rollout restart on your httpd deployment, run:

$ kubectl rollout restart deployment httpd-deployment
Enter fullscreen mode Exit fullscreen mode

Now to view the Pods restarting, run:

$ kubectl get pods
Enter fullscreen mode Exit fullscreen mode

Notice in the image below Kubernetes creates a new Pod before Terminating each of the previous ones as soon as the new Pod gets to Running status. Because of this approach, there is no downtime in this restart method.

Using kubectl rollout restart

Automatic restarts by updating the Pod’s environment variable

So far, you’ve learned two ways of restarting Pods in Kubernetes; one by changing the replicas and the other by rollout restart. The methods work, but you explicitly restarted the pods with both of them.

In this method, once you update the Pod’s environment variable, the change will automatically restart the Pods.

To update the environment variables of the Pods in your httpd deployment, run:

$ kubectl set env deployment httpd-deployment DATE=$()
Enter fullscreen mode Exit fullscreen mode

After running the above command, which adds a DATE environment variable in the Pods with a null value (=$()), run $ kubectl get pods and see the Pods restarting, similar to the rollout restart method.

Adding an environment variable to Pods

You can verify that each Pod’s DATE environment variable is null with the kubectl describe command.

$ kubectl describe pod <pod_name>
Enter fullscreen mode Exit fullscreen mode

After running the above command, the DATE variable is empty (null) like in the image below.

Verifying environment variable addition

Restarting Pods by deleting them

Because the Kubernetes API is declarative, it automatically creates a replacement when you delete a Pod that’s part of a ReplicaSet or Deployment. The ReplicaSet will notice the Pod is no longer available as the number of container instances will drop below the target replica count.

To delete a Pod, use the following command:

$ kubectl delete pod <pod_name>
Enter fullscreen mode Exit fullscreen mode

Though this method works quickly, it is not recommended except if you have a failed or misbehaving Pod or set of Pods. For regular restarts like updating configurations, it is better to use the kubectl scale or kubectl rollout commands designed for that use case.

To delete all failed Pods for this restart technique, use this command:

$ kubectl delete pods --field-selector=status.phase=Failed
Enter fullscreen mode Exit fullscreen mode




Cleaning up

Clean up the entire setup by deleting the deployment with the command below:

$ kubectl delete deployment httpd-deployment
Enter fullscreen mode Exit fullscreen mode




Conclusion

This article discussed 5 scenarios where you might want to restart Kubernetes Pods and walked you through 4 methods with kubectl. There is more to learn about kubectl. To learn more, check out the kubectl commands reference.

Top comments (0)