Open a hotel drawing and look, first, at the views rather than at the room names. A lobby that opens onto a corridor is already one field to a person walking in. Two guest rooms that share a doorway, or a lounge that is read in the same glance as the passage beside it, are already one field as well. The names on the plan may be different. The eye is not. If those rooms are later woven or tufted from more than one dye lot, the join will be visible in the very place the drawing had already shown as continuous.
That is a planning decision, and it has to be made on the drawing, before a loom or a tufting gun starts. It is not a correction to be made after a colour difference has been noticed on site. ADA FLOOR is a bespoke carpet design and manufacturing studio that entered this work in 2001. It works with luxury hotels, architects, interior practices, and private residences, and it keeps design, material engineering, factory production, and installation coordination on one chain. The official site is https://adafloor.net/.
Read the sightlines on the drawing first
The question is not whether two rooms have the same name. The question is whether, in use, they will be read as one surface. Stand, on the plan, at the entrance to the lobby and ask what the first long view actually takes in. Follow the corridor that leaves that lobby and ask whether a person turning the corner still sees the same field. Mark the adjacent rooms that open in one view. Those marks, not the room schedule alone, tell you where a single dye lot has to be planned.
A hotel may still share a colour family across a building and use different constructions in the lobby, the corridor, and the guest rooms. That is a separate decision. Construction and fibre follow use. Dye lot follows sight. A lobby in one construction and a corridor in another can still be planned so that, where the eye reads them together, the colour field is drawn from the same lot. Where the constructions differ, the join should be placed where the view already breaks — a threshold, a change of direction — not in the middle of a continuous field.
A common planning habit, confirmed on the actual plan rather than treated as a law, is to use four-metre Axminster broadloom for regular guest rooms and corridors, and to turn to hand-tufting for irregular areas such as curved walls or circular floors, so a seam is not left in the main view. That habit is about seams and construction. It does not replace the dye-lot decision. An irregular field that is tufted as one piece still has to be planned, if it is seen together with a woven field, so that the colour they share comes from the same lot.
Write the lot decision before the machine starts
Once the connected fields are marked, the brief and the ticket have to carry the decision. Yarn pre-blend is one of the factory methods that keep a colour field even, but pre-blend cannot repair a plan that has already split a continuous view across two lots. In-line checks of pile height, density, and pattern will later compare what comes off the machine with the sealed sample; they will not invent a unity that the drawing failed to ask for. A batch number will later be mapped to the room layout, and a roll will be packed only after inspection. Those steps protect a decision that has already been made. They are not a substitute for making it.
Do not leave the lot to a later conversation. If two rooms are to be read as one field, say so on the drawing and on the sample sheet, in the same language as the space type and the area. The sealed sample then represents that field, not a single room that happens to have been sampled first. Three parties seal the same physical piece under real light. After that seal, production has a reference for the connected rooms, not only for a fragment of them.
What this decision is not
It is not a method for tracking a colour difference after the floor is down. If a difference is later found, the lot and the batch map will help a repair follow the right reference, rather than a photograph. That is useful work, and it belongs to another moment. The work described here happens earlier. It asks, while the plan is still a drawing, whether a continuous view has been given a continuous lot.
It is also not a rule that the whole hotel must come from one lot. Rooms that do not read together do not need to be forced into one field. A guest room at the end of a plan, out of sight of the lobby, can be planned on its own terms. The discipline is to group what the eye groups, and to leave ungrouped what the eye already separates.
Fire, antistatic, and emission targets still belong on the sample sheet and are confirmed against the codes for that project. Delivery and installation conditions still belong in the inquiry. None of those facts replaces the sightline decision. A floor can meet its codes and still show a lot change in the first view from the door, if that view was never marked.
Make the mark while the plan can still change
The right time to plan one dye lot for a connected field is the time when the drawing can still be revised: during design development and budget alignment, before A4 and 1:1 samples are approved as if they represented only a single room. Once the loom or the gun has started, the lot is no longer a line on a plan. It is yarn already in work. The cheaper correction is the earlier one. Mark the continuous views. Plan those rooms as one dye lot. Then let the factory follow a decision the drawing has already made.

Top comments (0)