A customer sent us a mold insert a while back with a question we get more often than you'd think: wire or sinker? The drawing had a through cavity with a sharp internal corner and a tolerance that wasn't generous. On paper it looked like a wire job. It wasn't, and we learned the difference on that batch.
The corner is what decides it
Wire EDM follows a path. It can cut an internal corner, but the corner can never be truly sharp — the wire has a radius, and the spark leaves a small fillet. If the drawing needs a crisp internal corner, wire leaves you a bit to clean up by hand, or a corner relief you didn't want to put there.
Sinker EDM is the opposite trade. You make an electrode in the shape you want, burn it into the block, and the corner comes out as sharp as the electrode. For blind cavities and sharp corners, sinker wins. The cost is that you have to make the electrode first, which is a whole job of its own.
On that insert, the sharp corner mattered more than we first read. We quoted wire, cut it, and the customer's fitter pointed at the fillet. We ate the rework. Nothing dramatic, but it was on us, and it's the kind of thing you remember.
What we tell people now
If it's a through cut with generous corners, wire is faster and the setup is simpler. If it's blind, or the corner is sharp, or you need a texture on the wall, sinker. Sometimes both — rough with wire, finish the corner with a small electrode. That's more expensive and I won't pretend otherwise, but it beats arguing about a fillet after the parts are cut.
Lead time is the thing buyers underestimate. A sinker job carries electrode design and burn time on top of the milling, so a slot that looks like a two-week part can quietly become three. We try to flag that at quote, not at delivery.
A note on what we actually do here
We run both processes in Shenzhen, alongside our milling and turning lines, mostly for mold components, connector tooling, and small complex parts. Tolerances down to ±0.005 mm where the drawing calls for it. We're a CNC machining shop, not a mold specialist — mold work is a slice of what comes through, which is why I'm happy to say when a job is better off with a dedicated mold shop.
If you're weighing wire against sinker on a real drawing, the corner and whether the cavity breaks through will usually settle it faster than any chart. CHX Precision Metal's machining capabilities has a bit more on the processes we run in-house.
CHX Precision Metal — precision CNC machining in Shajing, Bao'an, Shenzhen. MOQ 1 piece, prototypes 3–7 working days, batch production 7–15 days, EXW Shenzhen.
Top comments (0)