An LG TV without its remote is not dead. The joystick button on the set still handles power, volume, and channels. Everything past that point needs a real remote or a stand-in. This post draws that line first, then sets your phone up as the stand-in. The setup is much easier while the original remote still works, and the last section explains why.
The button on the set covers power, volume, and channels
LG puts one button on the set itself, under the middle of the panel or behind its lower edge. It comes in two shapes, and they do not reach the same functions.
| Button | How you use it | What it reaches |
|---|---|---|
| Type A: press only | Short press, or hold for a second or more | Power on and off, and the on-screen menu |
| Type B: joystick | Press, or slide left, right, up, down | All of the above, plus volume and channel |
On a Type B set the moves are literal. Slide left or right for volume, up or down through the saved channels. Press once and release to turn the TV on. Press and hold for a few seconds to turn it off, which closes running apps and stops any recording.
Press the button once while the TV is on and a menu appears on screen. It offers power off, input source, quick settings, and clearing the on-screen display. The manual adds one caveat. Press the button before sliding it and volume and channel may stop responding.
That is the ceiling. Opening an app, signing in, or typing a search is out of reach here. So you need something that lasts longer than the emergency.
A phone remote needs nothing but the same Wi-Fi
An LG webOS TV takes commands from apps on the same local network. Nothing gets installed on the TV and no account is created. Put Dotori LG TV Remote on the phone and pair once. The number pad, D-pad, volume, and channel keys land on the phone screen.
Three steps.
- Turn the TV fully on and put the phone on the same router. A set in deep standby does not answer discovery.
- Pick the TV in the app. Tap the wrench key and open TV connection. If the set is missing from the list, press Search again.
- Approve the prompt that appears on the TV. The app saves the client key on the phone, so later connections normally do not ask again.
The prompt follows the TV's own language, not the phone's. Step 3 is the point of this post. The approval button lives on the TV screen, and reaching it takes direction keys and OK. If the remote is already gone, whether the joystick can drive that popup depends on the model. Pair while the remote still works and the gate disappears entirely. Think of it as insurance.
The trackpad replaces the Magic Remote pointer
The status panel under the keys doubles as a trackpad. Drag to move the TV cursor, tap once to select, and slide two fingers to scroll. The same panel reports what the TV is doing: current channel, current volume, and the app in focus. Volume and mute changes come back as large feedback over the pad.
Cursor speed is adjustable, and so are vibration and key-press sound.
Text entry is the one thing this app leaves alone. webOS support for remote text input differs from app to app. Pushing characters in fails quietly instead of working. For TV search boxes, pair the phone as a keyboard with Dotori Bluetooth Keyboard. Run it alongside the remote.
Waking a TV that is already off takes one setting
Turning the TV off works the moment you are connected. The reverse is the hard direction. A set that is off does not answer network discovery. The app instead sends a Wake-on-LAN packet to the MAC address it saved while pairing. That only lands if the TV is set to listen for it.
- 2017 models and later: Settings > General > Mobile TV On > Turn On Via Wi-Fi
- 2025 models and later: Settings > Support > IP Control Settings > Wake on LAN
Menu names move around between models and webOS versions. Measured on an LG OLED C8 running webOS 4.x, the set took roughly 15 to 20 seconds to wake. Do not keep tapping the power key while the screen is still black. Wired and Wi-Fi interfaces can carry different MAC addresses. Pair over the connection the TV normally uses.
Wrap-up
A lost remote costs less than it first looks. The joystick button on the set still reaches power, volume, channels, and the settings menu. A phone covers everything above that. Mobile TV On covers the one case a phone cannot reach on its own.
If the remote is still in your hand, spend five minutes on it today. Install Dotori LG TV Remote, pair it once, and switch Mobile TV On in the TV settings. That approval prompt gets much more expensive after the remote goes missing.





Top comments (0)