DEV Community

Yang shanhe
Yang shanhe

Posted on

Optimizing Center of Gravity and Battery Placement in Rear-Rack Fat E-Bikes

In B2B e-bike sourcing, frame geometry dictates the primary use case. Rear-rack models are increasingly popular for utility and last-mile delivery, but they introduce specific engineering challenges regarding the center of gravity.

When the battery is mounted on the rear rack instead of the downtube, the center of gravity shifts backward. This changes the handling dynamics, especially when the bike is unloaded. To compensate, engineers have to tune the rear suspension and ensure the rear hub motor provides smooth, progressive power delivery to prevent wheel spin under acceleration.

Looking at the JIUYUE HX300 20in Rear Rack, it utilizes the same 48V 500W brushless rear hub motor and 48V 13Ah lithium battery as its twin-crown sibling, but the frame is optimized for cargo. The 20x4.0 fat tires help stabilize the rear-heavy weight distribution, while the Shimano 7-speed gearing allows riders to manage the 45 km/h top speed efficiently.

The bike supports a 150 kg max load. From a shipping perspective, the rear-rack configuration changes the packing density slightly compared to the standard frame, allowing 215 units per 40HQ container.

The complete factory spec sheet for the model I tested is here: https://ebikefactory.shop/products/jy-hx300-20-rear-rack/

When importing rear-rack e-bikes, always verify the rack's welding points and the BMS discharge limits, as utility riders tend to draw sustained current under heavy loads.

Tags: ebike, batteries, logistics

Top comments (0)