Most spec sheets I get from suppliers stop at "48V 13Ah" and let the buyer figure out the rest. That is not enough to plan a container, and it is not enough to answer a dealer who asks how far the bike actually goes. Here is the order I read a sheet in now, using a model I have been going through recently, the JIUYUE EB00 26in, as the concrete example.
Start with watt-hours, not amp-hours.
48V × 13Ah = 624 Wh nominal. That is the number that travels between models and between suppliers. Amp-hours on their own are meaningless without pack voltage, and marketing sheets love to quote the bigger-looking figure.
Then divide by consumption.
The EB00 sheet claims 32 km pure electric and 45 km assisted. 624 Wh ÷ 32 km ≈ 19.5 Wh/km. That is plausible for a 32 kg bike on 26×4.0 tires with a 150 kg max load rating — fat tires and a high-carbon steel frame are heavy, so somewhere between 15 and 25 Wh/km is the honest band depending on rider weight, terrain, temperature and how much the rider pedals. If someone claims 60 km pure electric on a 624 Wh fat bike, they are quoting a test-rig number, not a road number.
Charging time tells you what charger is in the box.
The sheet says more than 8 hours. On a 13Ah pack that implies roughly a 2A charger (13 ÷ 2 ≈ 6.5 h plus the CV taper). Slow charging is easier on cells, but it also means you should plan the charger as a line item and confirm its input voltage range for your market, not assume it.
Motor and controller.
48V 500W brushless rear hub is about 10.4A continuous at nominal voltage. Ask what the controller is rated at peak and whether it is sine wave — that is where the ride quality and the heat live. Also ask about axle hardware: on a rear hub with a Shimano 7-speed drivetrain and disc brakes, the torque washer and dropout fit is the first thing I check, because that is where assembly mistakes show up on new stock.
Frame and finish.
High-carbon steel is cheap and repairable, which matters for fleet buyers. What it does not tell you is paint adhesion at the welds. If you ship to coastal or salted-road markets, ask for the salt spray result before you commit to a batch.
Container math.
40HQ = 180 pcs. Against a 20-unit MOQ, that means a test order is a partial load, and freight per unit only settles down as you approach a full box. Do that calculation before you compare unit prices, because it usually changes the ranking.
Caveat: I have only handled these as new factory stock out of Ningbo, not as long-running fleet units, so my durability read is limited. Treat the range figures as planning numbers, not guarantees.
The factory spec sheet for the model I used as the example is here: https://ebikefactory.shop/products/jy-eb00-26/
Tags: ebike, batteries, hardware, manufacturing
Top comments (0)