Outlook.com
Yesterday, Outlook.com had connectivity trouble, and I heard from several people who had to fall back to fax to get an urgent message through while email was unreachable — as of writing this, it doesn't sound fully resolved yet. "Fax is dead" is the common assumption, but when a cloud email provider goes down, a fax line that only needs a phone connection can still be the thing that gets the message out.
Fax is one of those technologies that everyone assumes is dead, except in the industries that still run on it. If you've ever had to wire a business system (ordering workflows, work reports, etc.) up to a fax line, you know the tooling landscape is pretty rough: either you reimplement the fax protocol yourself, or you're stuck with a server-side setup that's hard to maintain and clients that behave differently depending on the OS.
We just published ACR FAX, which tries to fix that.
🔗 https://github.com/acrossreport/acr-fax
ACR FAX combines ACR, our report-rendering engine, with HylaFAX so that external systems can trigger fax sends automatically, while also supporting HylaFAX's usual send targets — screen captures, Office files (Excel/Word), and PDFs — through the same system.
It's currently at v0.1.0, published early for testing, with client and server shipped as a matched set.
Highlights
- Built on HylaFAX, unmodified. Instead of reimplementing the fax protocol, ACR FAX uses HylaFAX — which has been battle-tested for decades — as the server foundation. The binaries are built from unmodified upstream HylaFAX source, so future upstream upgrades stay easy to pull in.
- Verified modems. Currently verified with USB-connected Class 1 / 1.0 / 2 fax modems: Planex modems and the AGPtek External USB2.0 FAX MODEM (analog, dual-port). PCI/PCIe multi-port serial board support is planned.
- A dedicated setup tool with automatic modem detection. At install time, and whenever a modem is swapped, a GUI tool scans connected modems and applies the required configuration automatically.
- The client talks HylaFAX's protocol directly instead of wrapping external commands, which keeps it lightweight and fast.
- One codebase, every desktop OS. The client is built with Avalonia UI, covering Windows/macOS/Linux on both x64 and ARM64 from a single codebase.
- Remote administration. Dial settings and user management can be changed from the client UI over SSH — no need to go to the server machine.
- Self-contained client. No separate runtime to install; just run the distributed executable.
Architecture
flowchart TB
ACR["ACR engine<br/>(auto-sends reports/screens as fax)"]
C1["Client #1<br/>(Windows / macOS / Linux)"]
C2["Client #2<br/>(Windows / macOS / Linux)"]
C3["Client #N<br/>(Windows / macOS / Linux)"]
HF["HylaFAX<br/>(single Ubuntu server)"]
PSTN[("Phone line / remote fax machine")]
ACR --> C1
ACR -- "auto-submits a send job" --> C2
ACR --> C3
C1 --> HF
C2 -- "send jobs / shared received faxes & history" --> HF
C3 --> HF
HF <--> PSTN
- There's exactly one server (HylaFAX running on Ubuntu). The fax modem/line connects there.
- Any number of clients can connect to that one server. Every client sees the same received faxes and send history — nothing is siloed to a single machine.
- Besides manual sending, clients also support automatic sending driven by the ACR engine: generate a PDF from report data and fax it with no manual steps.
Requirements
- Server: Ubuntu Desktop 24.04 LTS is recommended. A physical machine (or equivalent) is the baseline, since you need a serial/USB port for the fax modem/line. If you only have a Windows machine, running Ubuntu 24.04 under WSL2 has been confirmed to work (16GB+ RAM recommended on the Windows host). Bare-metal Ubuntu testing is still pending.
- ARM64 server hardware hasn't been tested on real hardware yet — the current
acr-fax-server-linux-aarch64.tar.gzis cross-compiled only. - Client: Windows / macOS / Linux, x64 and ARM64 — all cross-built so far, with real-hardware testing still to come.
Modem setup
A dedicated Ubuntu GUI tool handles modem detection, udev rule generation, AT command testing, and restarting the HylaFAX service, all in one place. Beyond initial setup, it can re-scan every connected line whenever a modem is swapped or added later.
Distributed binaries (v0.1.0)
Releases ships eight self-contained archives — six client builds and two server builds — each with the runtime bundled in, so you just unpack and run.
| File | Role | OS | Architecture | Format |
|---|---|---|---|---|
| acr-fax-client-windows-x64.zip | Client | Windows | x64 | zip |
| acr-fax-client-windows-arm64.zip | Client | Windows | ARM64 | zip |
| acr-fax-client-macos-x64.tar.gz | Client | macOS | x64 (Intel) | tar.gz |
| acr-fax-client-macos-arm64.tar.gz | Client | macOS | ARM64 (Apple Silicon) | tar.gz |
| acr-fax-client-linux-x64.tar.gz | Client | Linux | x64 | tar.gz |
| acr-fax-client-linux-arm64.tar.gz | Client | Linux | ARM64 | tar.gz |
| acr-fax-server-linux-x86_64.tar.gz | Server | Linux | x64 | tar.gz |
| acr-fax-server-linux-aarch64.tar.gz | Server | Linux | ARM64 | tar.gz |
The server (acr_fax_server) is meant to run directly on the Ubuntu machine running HylaFAX, so it's only distributed for Linux.
License
- The software itself: Across Report's own license (separate from HylaFAX's).
- HylaFAX: Copyright (c) 1990-1996 Sam Leffler, Copyright (c) 1991-1996 Silicon Graphics, Inc. — a permissive MIT/BSD-style license, bundled unmodified. See
HylaFAX-COPYRIGHT.txtin Releases for the full terms.
The software itself is free to use. If your team needs paid assistance with initial deployment, modem/hardware setup, or custom ERP/EDI integration, feel free to reach out via acrossreport.com or open an issue on GitHub.
What's left
v0.1.0 is an early test release. Still on the list: verification on PCI/PCIe multi-port serial boards, real ARM64 hardware testing (server and client), and bare-metal Ubuntu testing (so far only confirmed under WSL2).
If you give it a try, feedback via Issues is very welcome.
Top comments (0)