Over time, research facilities, pharmaceutical labs, and university science departments store hundreds of chemical products in small containers. The clean up of old lab stock can pose serious risks to health and safety if not handled properly.
The chemicals found in labs are not the same as industrial waste. They are much smaller volumes of varied chemicals. If chemicals which do not mix are packed together they could cause fires, emissions of toxic gases or severe reactions whilst being transported along highways.
When carrying out a safe and compliant clean up of your lab you must ensure:
- Pre-Packing Audit
Prior to moving any chemical containers off the lab shelves or cabinets you need to ensure everything has been identified, recorded and assessed.
Items to consider when auditing your chemical stock include:
Bottle/jar inspection – Check bottles and jars for damaged lids, broken glass, crystalised deposits on the lid, or no label requiring special stabilisation.
Chemical Categories – Sort chemicals into their respective DOT hazard categories such as flammable, oxidising, corrosive, toxic and water reactive.
Old Chemicals/Peroxide Formers – Identify chemicals with short shelf lives such as diethyl ether or tetrahydrofuran which could form a shock sensitive organic peroxide.
- Packing Chemicals in the Lab
Chemicals must be packed in accordance with Department of Transportation regulations (49 CFR). This ensures that if the inner containers are damaged during transport there will not be any reactions.
Requirements for packing chemicals in the lab:
Do not mix chemicals which are not compatible. Do not put acids with bases, oxidisers with flammables or cyanides with acids in the same outer drum.
Outer Drum – Use approved UN rated steel/fibre/polyethylene open head drums.
Inert Packing Material – Fill the drum with inert packing material such as vermiculite/diatomaceous earth. Ensure there is enough to absorb all of the liquid in the drum. This should surround the inner glass/plastic bottle.
- Manifest
Once your drums have been closed, labelled and weighed you will need to document everything so that you are legally compliant from the lab to the final disposal.
Best practice includes:
Packing Sheets – Include a detailed list of chemicals in the container. Keep copies with your Uniform Hazardous Waste Manifest.
Correct Waste Codes – Apply all relevant federal and state waste codes to your waste (D001 - Ignitability, U/P Listed Toxic). This will reduce the risk of your waste being rejected at the receiving facility.
Correct Treatment – Only send lab packs to approved Treatment, Storage & Disposal Facilities (TSDF’s) who can treat small container chemicals.
Final Thoughts
Packing lab chemicals requires an understanding of chemical knowledge and compliance with federal transport legislation. By carrying out a detailed audit of your old stock, following DOT guidelines for chemical compatibility and keeping detailed manifests laboratory managers can keep staff safe and ensure there are no compliance issues.
For more technical information on approved hazardous waste transportation visit Envirotest Transport.
Top comments (0)