DEV Community

Nashtarin Nur
Nashtarin Nur

Posted on

The Deterministic Edge: Architecting a 4-Engine Stack for Closed-Loop Industrial Control

If you’ve ever read a label on a houseplant then you’ll be familiar with the term ‘bright indirect light’. It is the most commonly used lighting requirement for indoor plants, but means absolutely nothing physiologically.
Our eyes are extremely adaptable. This means that we will dilate our pupils to make us feel like that poorly lit corner of our living room is getting enough light, when the truth is our plant is essentially starving.
Lighting our plants based on what we see will mean our plants are either receiving too little light or too much. To take your plant care beyond the amateur stage we need to understand how to measure our light scientifically.
How to Measure Light for Plants
To make sure our indoor plant gets optimal light we need to measure light in the right units.
Most light metres and smartphone apps will measure light in Lux or Foot-Candles. Lux measures how bright the light is based on how sensitive our eyes are. Our eyes are most sensitive to the green part of the spectrum whereas plants mainly use blue (400-500nm) and red light (600-700nm).
This is known as Photosynthetically Active Radiation (PAR).
When considering light intensity for plants, we need to measure the Photosynthetic Photon Flux Density (PPFD) in micromoles per square metre per second ($\mu mol/m^2/s$). PPFD tells us how many photons hit our plants leaves per second.
The length of time our plants receive light is also important. The total PAR they receive throughout the whole day is known as the Daily Light Integral (DLI). If our plant receives medium PPFD for 14 hours under a grow light this will provide the same energy (DLI) as a high PPFD for 4 hours near an east facing window.
How Plants Show They Are Getting Too Much or Too Little Light
Plants give us clues when they’re receiving the wrong amount of light.
If our plant is receiving too little light (low DLI) the plant will divert energy towards etiolation. This causes the plant to grow long, thin stems with large gaps between each node. The leaves will often go dark green to increase the surface area of chlorophyll. However, the plant will not grow and the bottom leaves will drop off.
If our plant is receiving too much light it will cause photo-inhibition. This causes the plant to become burnt. As the plant takes in too much light energy it causes reactive oxygen species. This causes damage to chlorophyll. Symptoms of this include bleached/pale leaves, brown burnt leaf tips and curled leaves.
How to Create an Optimal Lighting Setup
To create an optimal lighting set up for your indoor plants you need to track how different factors affect the light the plants receive.
As light from windows decreases exponentially the further away you are from the window it is important to track where your plant is and how the DLI changes through the seasons. Using a combination of natural daylight and targeted spectrums from artificial lighting will ensure your plants are always receiving the same growth throughout the year. Using a platform that provides data driven plant care and monitoring tools will help plant parents to ensure they’re giving their plants the best light possible.
3 Ways to Optimise Your Plant Lighting
Don’t Rely on Your Eyes – Use a quantum PAR metre or calibrated smartphone app to measure PPFD.
Calculate DLI – Multiply your average PPFD by how many hours light your plant is receiving each day. This will tell you if you’re meeting your plants DLI requirements.
Increase Gradually – If you’re using grow lights or moving your plant to a brighter window increase the amount of light your plant receives gradually over 7-10 days. This allows the leaves to develop carotenoid pigments to protect them.

Top comments (0)