You hear a footstep, and then the other player is already around the corner. Or it goes the other way: you see him, you shoot, and your headset is still catching up. If that sounds familiar, the headset may not be the problem. How it talks to your console often matters more.
Best Low-Latency Wireless Headsets for Console
I ran three popular console headsets through the free Bluetooth Lag Meter that lives on this page. Below you will find what I measured, what those numbers can and cannot tell you, and what I would check before buying a wireless headset for a PS5 or Xbox.
What I measured
The Bluetooth Lag Meter plays a click every 0.8 seconds while a ball bounces between two walls. You raise the picture delay until the ball touches the wall at the exact moment you hear the click. The number you stop on is how late that audio output plays sound compared with the picture.
Here are the three readings I stopped on, with a screenshot of the tool for each one:
Headset How it connects to a console My reading in the tool Proof
PlayStation Pulse Elite PlayStation Link (USB adapter) 200 ms View image
SteelSeries Arctis Nova Pro Wireless 2.4 GHz wireless 180 ms View image
Turtle Beach Stealth 600 Gen 3 2.4 GHz USB wireless 120 ms View image
Measured on my PC with the tool on this page, not on a console. Click "View image" to see the screenshot of the tool at that reading.
How to read these numbers
Please do not treat this table as a leaderboard. A few honest limits:

It was a PC, not a console. The readings tell you about my setup, not about a PS5 or an Xbox.
I did not save a wired reference for these three runs. Each number therefore includes everything between my browser and my ears: Windows audio, the headset's own processing, and my screen.
It is done by eye and ear. The tool itself warns that a 60 Hz screen makes a reading wander by about 15 to 20 ms between runs.
Readings this high are more than I would expect from a 2.4 GHz link on its own. My guess is that a good part of the delay comes from my PC's audio path rather than from the headsets. That is why I am showing raw numbers and not calling them "the latency of the headset".
If you want the real cost of going wireless, measure it yourself. Run the tool once with wired headphones or your speakers and save that as the reference. Then run it with the wireless headset and save that too. The difference is the delay the wireless link adds. The tool is right below.
Top comments (0)