This article was first published on the SecLern blog.
How long to study for Security+ depends on your starting point. Most candidates should plan on 100–150 focused hours, which is roughly 7–15 weeks at 10–15 hours a week. Complete beginners usually need 150–200 hours, or 10–20 weeks at the same pace. Those are planning estimates, not CompTIA requirements. For the SY0-701 exam, CompTIA's certification page lists a maximum of 90 questions in 90 minutes and a passing score of 750 on a 100–900 scale.
TL;DR
- Most candidates need 100–150 focused study hours for CompTIA Security+; candidates starting from zero usually need 150–200 hours.
- Weeks = total focused hours ÷ realistic weekly hours, so a 120-hour plan at 12 hours a week takes 10 weeks.
- Security Operations is the largest SY0-701 domain at 28%, ahead of Threats, Vulnerabilities and Mitigations at 22%.
- CompTIA lists a maximum of 90 questions in 90 minutes and a passing score of 750 on a 100–900 scale for SY0-701.
- CompTIA recommends Network+ plus two years of IT administration experience with a security focus before Security+.
- SecurityX (CAS-005) and AWS Security Specialty are separate exams, so Security+ hour ranges do not transfer to either.
How long does it take to study for Security+?
Plan on 100–150 focused study hours if you already work in IT, and 150–200 hours if you are starting from zero.
The table converts those ranges into calendar time at three common weekly loads. They are planning estimates based on how much of the exam is new at each starting point, not figures CompTIA publishes.
| Starting point | Focused study hours | Weeks at 10 hrs/week | Weeks at 15 hrs/week | Weeks at 20 hrs/week |
|---|---|---|---|---|
| No IT experience or networking background | 150–200 | 15–20 | 10–14 | 8–10 |
| Help desk or A+ level, no networking certification | 120–150 | 12–15 | 8–10 | 6–8 |
| Network+ (N10-009), CCNA 200-301, or IT admin work | 80–120 | 8–12 | 5–8 | 4–6 |
| Security work or recent intensive training | 60–100 | 6–10 | 4–7 | 3–5 |
CompTIA's own baseline is higher than most candidates expect: the Security+ certification page recommends CompTIA Network+ plus two years of IT administration experience with a security focus before you sit the exam. If you do not have that background yet, use the beginner or help-desk row.
The hours model survives version changes; the syllabus does not. Study the objectives for the exact code you book, and confirm that code and the current exam price on CompTIA's page before you set a date. If you are weighing SY0-701 against SY0-801, this version comparison covers what changed.
Why do Reddit answers range from two weeks to six months?
Because a two-week pass and a six-month grind usually describe different people, not different tricks.
Two weeks at 8 hours a day is 112 hours. That sits inside the experienced-candidate range and far outside the beginner range, and fast-pass posts often leave out the 8 hours a day. The inputs that actually move the calendar:
- Prior knowledge. A help-desk technician already knows authentication, permissions and network basics. A career changer meets all of it at once.
- Weekly hours. 15 hours a week for 10 weeks and 5 hours a week for 30 weeks are the same 150 hours with very different retention.
- Practice quality. Answering questions and reviewing misses shows you what you do not know; rewatching videos mostly feels productive.
- Exam version. Objectives change between codes, so advice written for a retired exam may not match the one you book.
- Reschedules. Some "six months" stories include a moved exam date.
None of that means the fast posts are lying. It means their calendar was built on a baseline you cannot read from a screenshot. Run a diagnostic, fix a weekly schedule, then pick the date.
How many hours a week should you study for Security+?
Most working adults should study 10–15 focused hours a week; at that load, a 120-hour plan takes 8 to 12 weeks.
The formula is weeks = total focused hours ÷ realistic weekly hours. A 120-hour plan at 12 hours a week is 10 weeks. The same plan at 6 hours a week is 20 weeks, which is why your weekly availability, not the total, should drive the exam date.
| Weekly focused hours | A 120-hour plan takes | Who this load suits |
|---|---|---|
| 5 | 24 weeks | People with irregular schedules or heavy caregiving duties |
| 7–10 | 12–17 weeks | Full-time workers with evenings and one weekend block |
| 12–15 | 8–10 weeks | Most working adults; the practical sweet spot |
| 20+ | 6 weeks | People between jobs or studying full time |
Focused hours means active work: answering questions, doing labs and PBQs, reviewing your error log, and sitting timed practice. A video course playing in the background does not count, even though the clock runs the same way.
Split the load across five or six sessions and protect one block for reviewing what you missed. If the exam is already booked, set aside the final 10–14 days for timed practice and weak-domain review, then divide the remaining hours across the domains by weight. How to study while working full time has a schedule built for the 7–10 hour row.
How long does it take to study for Security+ with no experience?
With no IT experience, plan on 150–200 focused hours: about 15–20 weeks at 10 hours a week, or 10–14 weeks at 15 hours a week.
"No experience" has a specific meaning here. It means no help-desk or IT support work, no networking foundation, and no recent security coursework. If that describes you, the first 20 to 30 hours go to vocabulary and networking basics, because exam-style questions are not useful until terms like hashing, VLAN and least privilege mean something.
A sequence that works: skim the official objectives for your exam code, learn core security concepts, refresh networking (protocols, ports, subnetting), move into threats and architecture, then operations, and finish with timed practice.
Book after your practice scores are stable, not when you finish a video course. A readiness check that names your weakest domain is a better gate than finishing a playlist.
Three to five months is a normal timeline from zero. A longer calendar only helps when the hours inside it are active.
How should you divide study time across the Security+ domains?
Allocate study hours in roughly the same proportions as the exam weights, so Security Operations gets the largest block at 28% of SY0-701.
The weights below come from CompTIA's Security+ page. The hour column is arithmetic on a 120-hour plan: an example allocation, not an official formula.
| SY0-701 domain | Exam weight | Example hours in a 120-hour plan |
|---|---|---|
| General Security Concepts | 12% | 14 |
| Threats, Vulnerabilities and Mitigations | 22% | 26 |
| Security Architecture | 18% | 22 |
| Security Operations | 28% | 34 |
| Security Program Management and Oversight | 20% | 24 |
Security Operations is the largest domain, and it is also where monitoring, log analysis and many PBQ-style tasks live, so give it the biggest block and the most lab time. General Security Concepts is the smallest at 12%, but it supplies the vocabulary the other four domains assume, so beginners should not treat it as a warm-up.
The weights are a starting point, not the plan. Once you have practice results by domain, move hours toward whatever is lowest. Equal hours for every domain is usually the wrong split. Verify the weights against the objectives for your exam code, because CompTIA can rename domains and shift percentages between versions.
What does a realistic 12-week Security+ study plan look like?
A 12-week plan at 10–12 focused hours a week lands inside the 120–150 hour range for candidates with some IT background, and it leaves two full weeks for timed practice.
- Weeks 1–2: objectives and vocabulary. Read the official objectives for your exam code end to end, then start core security concepts and a networking refresh. Aim for 10–12 hours a week and write your own definition for every term you meet.
- Weeks 3–5: threats, vulnerabilities, mitigations, architecture. Those two domains are 40% of SY0-701, so they get three weeks. Add hands-on labs and PBQs instead of rewatching videos, and read how to actually pass the performance questions before your first one.
- Weeks 6–8: security operations. Monitoring, incident response and vulnerability management. Answer questions by domain and keep an error log with the reason you missed each one.
- Weeks 9–10: program management and oversight, plus weak domains. The 20% domain is easy to postpone and easy to lose points on. Spend the rest of these two weeks on whatever your practice results put at the bottom.
- Weeks 11–12: timed full exams. Two or three full simulations under the real time limit. Review every wrong answer the same day and stop adding new topics.
Compress to 8 weeks only if you already have networking or security work behind you: keep the order, give operations two weeks and program management one. Stretch to 16 weeks by adding two weeks to threats and architecture and two to weak-domain review. The final two weeks stay timed practice either way.
Is one month enough to study for Security+?
One month is enough only if you already have Network+ or CCNA-level networking, or security work experience, and can study 15–20 or more hours a week.
The math is unforgiving for beginners. Four weeks at 10 hours a week is 40 hours. Four weeks at 20 hours a week is 80 hours, which sits at the very bottom of the experienced range and is less than half of the 150–200 hour beginner range.
The risks in a one-month sprint are predictable: memorizing terms without being able to apply them, skipping PBQs because they take longer than multiple-choice questions, and burning out in the final week. The riskiest move is booking on a practice score that is still climbing.
If your exam is already on the calendar and you are short on hours, rescheduling costs less than a retake. If you cannot move it, spend what is left on timed practice and your two weakest domains rather than trying to cover everything once.
How do you know when you're ready to book the Security+ exam?
You are ready to book when you can explain each official objective in your own words and your timed practice scores have held steady across several attempts.
- Coverage. You have read every objective for your exam code and can say something specific about each one.
- Stable scores. Two or three timed practice exams land in the same range. One good mock is noise.
- Hands-on reps. You have done labs and PBQs, not only multiple-choice questions.
- A shrinking error log. Your reasons for missing questions have shifted from "never seen this" to "misread the question."
- Domain balance. No domain sits far below the others.
SecLern's free 10-question Security+ readiness check returns a score and your weakest domain without an email or a card, which is enough to decide between booking now and adding three weeks.
Once you decide, book through CompTIA's official page, where the exam code, price and appointment details live.
Does this timeline apply to SecurityX or AWS Security Specialty?
No. SecurityX and AWS Certified Security Specialty are separate exams with their own objectives, and Security+ hour ranges do not transfer to either.
CompTIA SecurityX (CAS-005) is a separate, expert-level CompTIA certification, and CompTIA's SecurityX page publishes its own objectives and exam details. AWS Certified Security Specialty is an AWS exam, not a CompTIA one; the AWS Certified Security Specialty page lists its own domains, and your study time depends heavily on how much hands-on AWS work you already do.
Use the same method: estimate hours from your background, divide by realistic weekly hours, then weight the domains. Just get the right objectives and practice questions for that exam. For the AWS exam, AWS Certified Security Specialty: SCS-C03 explained covers the scope and objectives.
Our perspective
We built SecLern around a boring observation: the problem is usually not a shortage of hours. It is that the hours were passive. A 14-hour video course feels like studying, and it is comfortable, but it never tells you which domains you can actually answer questions about. Our advice is to spend one hour before you pick a date: take a short diagnostic, log every miss by domain, and let that shape the calendar. The hour ranges in this article are not a personality test. Ten hours a week with no background is an honest 20-week runway. Fifteen hours a week with a CCNA is an honest 8 weeks. What is dishonest is booking a date and hoping the material absorbs by osmosis.
Practice
SecLern's CompTIA Security+ (SY0-701) study page turns this hours model into daily work: original practice questions with an explanation for every answer, browser-based labs and PBQs, and full timed simulations with readiness grades. The free tier needs no card and includes the first module of the path, 30 questions a day, 3 labs and PBQs, and unlimited flashcards. Pro is $15 a month or $99 a year with a 7-day trial (card required), and Exam Sprint is $29 once for 90 days of Pro-level access if your date is already booked. Details on pricing.
FAQ
How long does it take to study for Security+ with no experience?
With no IT experience, plan on 150–200 focused hours for Security+. At 10 hours a week that is 15–20 weeks, or roughly 3.5 to 5 months; at 15 hours a week it drops to 10–14 weeks. The first 20 to 30 hours go to vocabulary and networking basics before exam-style questions pay off. Confirm the objectives for your exam code on CompTIA's page.
How many hours a day should I study for Security+?
CompTIA publishes no official daily number for Security+. Most working adults do well with 10–15 focused hours a week spread over five or six sessions, which is roughly 1.5 to 2.5 hours per session, plus one review block. Short daily sessions beat one long weekend cram because you retain more of what you actively practiced.
Can I pass Security+ in two weeks?
You can pass Security+ in two weeks only with a strong head start. Two weeks at 8 hours a day is 112 hours, which fits the range for experienced admins and security staff. A beginner needs 150–200 hours, so two weeks would mean 11 to 14 hours every single day. Take a readiness check before you commit to a sprint.
How long does it take to study for SecurityX?
No Security+ hour estimate transfers to SecurityX. SecurityX (CAS-005) is a separate, expert-level CompTIA certification with its own objectives, so start from CompTIA's SecurityX page, estimate how much of that material is genuinely new to you, and divide by your weekly hours. Plan it from its own objectives, not by scaling Security+ numbers.
Is AWS Security Specialty study time the same as Security+?
No. AWS Certified Security Specialty is an AWS exam with its own domains, and it assumes working knowledge of AWS services, while Security+ is vendor-neutral and covers five broad domains. If you build in AWS daily your hours will be lower; if you do not, budget substantial lab time. Check the objectives on AWS's exam page.
How long does it take to study for cybersecurity overall?
There is no single number for cybersecurity overall, because it is a sequence rather than one exam. Most people build fundamentals with CompTIA A+ or Network+, then move to Security+, and the total depends on your starting point and the hours you can sustain each week. Plan the next exam, not the whole career.
Sources
Read the original, kept up to date, on SecLern.

Top comments (0)