DEV Community

StagingBench Team
StagingBench Team

Posted on AI-assisted

Build a Review Queue for AI Staging, Starting with a Failed Alignment

A generated living room can look convincing while leaving an awkward technical question unanswered. Does it still show the same walls and doors?

MeltFlex's Room 01 result is a useful example. The official alignment failed. Its architecture drift was recorded as 48.5, using the unaligned fallback. Framing was unknown.

That is enough to flag the image for review. It is not enough to say that 48.5% of the architecture changed. The drift score is not a percentage of altered building fabric.

I would build an inspection queue around that distinction. Numbers can identify images that need attention. The original photograph remains the reference for deciding what actually changed.

Read the result before interpreting it

The input here was a real CC0 photograph of a real open plan room. MeltFlex generated furniture, including a sofa, tables and an armchair. The saved comparison also shows differences in how the doorway, column and overhead soffit sit within the frame.

I would not translate those visible differences directly into a measured wall displacement. The official process could not reliably align the images.

The MeltFlex result page records 20 inlier matches against a requirement of 25. The output was saved from the on-page preview because the official download opened a subscription prompt.

A separate diagnostic used a looser matching ratio. It reported aligned drift of 38.0 and about 29% invented area. The record explicitly says this is not an official method v0.2 score.

That distinction belongs in any downstream report. Replacing the official fallback with the diagnostic number would hide the uncertainty that made the image worth reviewing.

Turn the JSON into a queue

The data/results.json file has a top level tools array. A tool's first room can appear in a room01 dictionary. Additional results can appear in a rooms list, where each entry has a room field.

Treating every result as a list entry would miss the first room records. Assuming every tool has been tested would also fail.

This short script handles both locations. Run it from the repository root and supply your chosen drift threshold as its command line argument.

import json
import sys
from pathlib import Path

threshold = float(sys.argv[1])
data = json.loads(
    Path("data/results.json").read_text(encoding="utf-8")
)

for tool in data["tools"]:
    rooms = []
    if isinstance(tool.get("room01"), dict):
        rooms.append(("01", tool["room01"]))
    rooms.extend((r["room"], r) for r in tool.get("rooms", []))

    for room_id, room in rooms:
        drift = room.get("architecture_drift")
        failed = (
            room.get("alignment_ok") is False
            or room.get("drift_aligned") is False
        )
        if failed or (drift is not None and drift > threshold):
            print(
                tool["id"], room_id,
                "drift=", drift,
                "alignment_failed=", failed
            )
Enter fullscreen mode Exit fullscreen mode

The threshold is a screening choice supplied by the person running the script. It is not an MLS compliance boundary. Failed alignment is included independently of drift, so uncertainty does not disappear simply because a fallback value falls below the chosen threshold.

Missing alignment flags are not automatically treated as failures. Some first room records omit those flags. That is a limitation to keep in mind when reading the printed list.

Keep measurement and inspection connected

The scoring methodology explains why the distinction matters. The process first estimates alignment, then compares structural edges within the overlapping area.

When alignment fails, the score falls back to the raw comparison. That comparison can mix framing differences with architectural differences.

Furniture, decoration and tiled watermarks can also affect the score. The automatic mask normally covers the top 65% of the frame. It therefore cannot stand in for inspecting the whole photograph.

For MeltFlex, my next step would be to compare the doorway, column, soffit and wall junctions directly. The question is whether those permanent features still represent the original room. The number tells me to investigate. The comparison supplies the evidence.

Add MLS review as a separate decision

The MLS disclosure guide summarizes policies that distinguish movable furniture from permanent property features. Its MLS Now section explicitly lists walls, windows, doors and ceilings among prohibited structural modifications.

Disclosure does not authorize those changes. A technically attractive output can still need rejection if it alters a prohibited feature.

The required label location also varies. The guide describes on-image disclosure for Canopy MLS. Its CRMLS section describes disclosure in the photo description field. Requirements for supplying or retaining the original differ too.

I would keep those decisions outside the script. This code finds results to inspect. It cannot decide which MLS governs a listing or whether a particular alteration is allowed.

The published results remain partial. Current editor ratings are not blind, and blind scoring is planned. MeltFlex's failed alignment gives a concrete reason for caution without proving a specific wall movement. A useful review process preserves that uncertainty until someone checks the actual photograph.

Top comments (0)