DEV Community

WaveXML
WaveXML

Posted on

Syncing a multicam interview by audio waveform and getting a Resolve-ready timeline back

A two-camera interview stays tidy in post if you plan for sync. You do not need jammed timecode. You do need the same sound on every device, a rough timeline in DaVinci Resolve, and a synced timeline you can bring back so you can nest the multicam and cut.

Disclosure: written by the WaveXML team, and the tool in this article is ours.

Shoot so every angle can be matched

Waveform sync compares the sound on each camera to the sound on the recorder. A camera that recorded silence cannot be matched later.

  • Leave the camera mics on, on every camera. The onboard audio is only scratch: thin or noisy is fine. Even quiet room tone can be enough.
  • Put the good sound on a separate recorder — a boom, lavs, or both, on a Zoom, MixPre, Sound Devices unit, or similar. Keep that recorder running through the conversation, including pauses between takes.
  • Give yourself a sync point. A slate or clap at the start of each setup, and again at the end of a long one, makes the later check easy. A spoken cue works if you have no slate.
  • Two ISOs on picture is the usual interview layout: guest and host, or a wide and a tight. Keep one camera per recording.

Set the camera clocks as well as you can. Sync by sound does not need them exact, but they help when you sort the clips.

Organise the clips and build a rough Resolve timeline

In the Media Pool, keep cameras and recorder in separate bins, and name clips so you can see which angle is which.

On the Edit page, build one unsynced layout timeline — not a multicam clip yet:

  1. One camera per video track (Cam A on V1, Cam B on V2, and so on).
  2. The recorder on its own audio track, not mixed under a camera.
  3. Leave the camera mics on and linked to their picture. Mute that scratch after the synced timeline comes back.
  4. Do not nest the multicam, and do not add transitions, speed changes, or compound clips yet.

The clips only need to sit on the right tracks. They do not need to be in perfect time.

Export, sync, and bring the timeline back

From Resolve, use File → Export → Timeline… and pick OTIO. WaveXML is a free Mac and Windows beta that reads that file, matches the recorder to each camera by sound, and writes a synced timeline you import back.

OTIO is the Resolve format that keeps stereo as stereo, and keeps each camera's sound linked to its picture on its own track. FCP7 XML also syncs, and free Resolve can export and import it, but stereo clips come back as mono, with only the left channel. If you finish in Premiere Pro, export FCP7 XML instead. Final Cut Pro uses FCPXML. WaveXML's OTIO support has been tested with DaVinci Resolve; for Premiere and Final Cut, stay on XML for now.

Drop the exported file on WaveXML's start screen, press Synchronize, then export the result. In Resolve, use File → Import → Timeline… and pick the synced file. Resolve creates a new timeline and leaves the old one as it was, so save the project first in case you want to bin the new one.

Check sync on every angle

Do not stop at the first clap. Find a loud, short sound — the slate, a clap, a laugh, or a clear word — and look at it on every picture track against the recorder mix. Then jump later in the conversation and check again. If one angle is off, confirm that camera recorded audio and that two cameras are not sharing a track. Some cameras have an internal picture-to-sound offset that a waveform match cannot see; a small nudge in Resolve is the usual fix.

Once every angle is locked to the mix, mute the camera scratch and leave the recorder. Then make a multicam clip for angle switching and start the real edit.

When the match fails, or drifts

Waveform sync needs overlapping sound. It will not invent a match for:

  • A muted camera. A body with the mic off, or a clip with no audio, cannot be placed by sound.
  • Long gaps with no overlap. If a camera was off while the recorder ran, or the recorder was in another room with a closed door and no sound in common, there is nothing to match for that stretch.
  • A nested multicam or compound clip exported as one object. Export the flat layout instead.
  • AAF. WaveXML does not read AAF. Use OTIO or FCP7 XML from Resolve.

Long takes can drift because the camera and recorder clocks run on their own. For recordings of an hour or more, the site recommends splitting the timeline into segments of about 30 minutes, syncing each one, and joining the results at a natural pause. Check sync at the start and the end of a long interview, not only at the clap.

A noisy room is not automatically a lost cause. Scratch can be thin and still usable. The problem is a room where the cameras and the recorder do not share the same sound, or where the scratch is so buried that you cannot hear a common event to check against. If a check point is unclear, pick a different moment with a hard transient.

Optional: a first edit from your own AI

WaveXML also has a local MCP, so your own Claude, Codex or Cursor can check still frames and cut a first edit. Video files are never uploaded. Treat that cut as a draft to open in Resolve, not as the finished interview.

Shoot with scratch on every camera, lay one device per track, export OTIO, sync, and check a known moment on every angle before you nest. That is the Resolve-ready timeline.

Top comments (0)