DEV Community

Cover image for Screen Recording Has No Sound? 6 Common Causes on Mac and Windows
Akok
Akok

Posted on Edited on

Screen Recording Has No Sound? 6 Common Causes on Mac and Windows

You record a few minutes of a workflow, hit play, and it is completely silent. Almost everyone who records their screen has been there.

Before you troubleshoot, separate two things, because most "no sound" problems come from mixing them up:

  • System audio: whatever the computer itself plays — videos, music, the other person's voice in a call.
  • Microphone: your own voice.

Often only one of the two was recorded while you assumed both were. Here are the causes, roughly in order of how often they come up.

1. On a Mac, the built-in recorder captures the microphone, not system audio

macOS's built-in screen recording (the toolbar from the screenshot shortcut, and QuickTime Player's "New Screen Recording") lets you choose a microphone, but it does not capture the sound your Mac is playing. If you recorded a demo that includes a video with music, a silent result is expected behavior, not a bug.

Your options:

  1. Narrate instead. If you only need your voice, the built-in tool is enough.
  2. Use a virtual audio driver. Free drivers such as BlackHole route system audio into a virtual input that a recorder can pick up. You usually have to build a "multi-output device" so you can still hear the sound yourself.
  3. Use a recorder that captures system audio directly. OBS can do this on recent macOS versions, and some dedicated screen recorders have it built in.

2. On Windows, Xbox Game Bar records one app at a time

Game Bar (Win + G) can capture system sound and the microphone, but it records a single app window and is designed for games. If you try to record the whole desktop, File Explorer, or a workflow that switches between windows, it may refuse or only capture one window.

For full-desktop recording with system sound, use OBS or another recorder that supports "whole screen + system audio". Some sound drivers also expose a "Stereo Mix" input, but that depends on your hardware and is often disabled or missing.

3. The app doesn't have microphone permission

Both systems have a per-app microphone switch:

  • macOS: System Settings → Privacy & Security → Microphone. Make sure the recorder is listed and on. If you clicked "Don't Allow" once, the system will not ask again — you have to turn it on here, and the app usually needs a restart afterwards.
  • Windows: Settings → Privacy & security → Microphone. Check that microphone access and "Let apps access your microphone" are on, and that your recorder isn't switched off in the app list.

A typical symptom of a blocked microphone: the video has an audio track, but the level is perfectly flat.

4. The wrong input device is selected

A computer can have several "microphones": the built-in one, headphones, a webcam, a monitor, a virtual device. The recorder's default isn't always the one you are speaking into.

  • Check which device the recorder is using.
  • In the system sound settings, speak and watch the input level meter. If it doesn't move, the wrong device is selected or it is muted.
  • After plugging or unplugging hardware, the system sometimes changes the default input on its own. Check again before recording.

5. Bluetooth headphones switch modes when the mic turns on

Bluetooth headphones use a high-quality profile for listening only. As soon as the headset microphone is also used, many of them drop into a call profile with a much lower sample rate. The result can be muffled sound, noise, or audio that suddenly disappears from your headphones.

A safer setup is wired headphones, or the computer's own microphone for recording with the Bluetooth headset used only for listening.

6. There is sound, but it doesn't match the picture

If audio runs a few hundred milliseconds early or late, usual suspects are:

  • the computer was under heavy load, so video frames were dropped while audio was not;
  • a virtual audio device or Bluetooth device adds its own delay;
  • the frame rate is set higher than the machine can keep up with.

Lower the frame rate and resolution, close heavy background apps, and record a short test. If you use Bluetooth, try wired for comparison.

A 30-second test before every long recording

Most "I recorded half an hour with no sound" accidents can be caught in seconds:

  1. Start recording, say "test", and play a short clip with sound.
  2. Stop and play it back. Check that both sources are there and the levels are reasonable.
  3. Then record for real.

Disclosure

I build InSnap, a screenshot and screen-recording app for Mac and Windows. Its recording panel has separate switches for the microphone and system audio, plus a live microphone level, which makes some of the checks above quicker. The troubleshooting above applies to any recorder.

The recording panel with separate microphone and system-audio controls

FAQ

Why can't my Mac record system audio? macOS's built-in recorder only offers microphone input. You need a virtual audio driver or a recorder that captures system audio directly.

Why do I only hear my microphone on Windows? Check whether you are recording the whole screen or a single app. Game Bar records one app. Whole-screen recording needs a tool with system-audio support, or a "Stereo Mix" input if your sound driver offers one.

The audio is recorded but very quiet. What now? Raise the input volume in system sound settings, move closer to the microphone, or normalize the volume in a video editor.

Can I add the voice afterwards? Yes, with any video editor. Matching timing to the actions takes time, so narrating while recording is easier when possible.

Details about built-in tools are based on Apple's and Microsoft's public documentation and common recorder documentation as of November 2026. Exact buttons and options depend on your system version.

Top comments (0)