DEV Community

All Done Tools
All Done Tools

Posted on Originally published at all-done.xyz

How to Calculate Your Electricity Bill in Pakistan (2026 Guide)

I built this free tool at All Done — this guide explains how to work out your own electricity bill in Pakistan, and how the free calculator I made can do the maths for you.

Your electricity bill in Pakistan is not a single flat rate. It depends on three things: your distribution company (DISCO), your consumer type, and how many units you used that month. Get those three right, and the rest of the bill starts to make sense.

Try it here: Electricity Bill Calculator — free, no signup, no account.

What you need before you calculate

First, find your DISCO on your bill. LESCO, IESCO, K-Electric and the other regional companies each serve a different area, and the tariff that applies to you depends on which one supplies your home or business.

Next, check your consumer type — domestic and commercial customers are charged on different tariffs, for example. Then find your units, measured in kilowatt-hours (kWh).

The calculator uses the current NEPRA tariffs under S.R.O. 279(I)/2026, so you do not have to look up the rate table yourself. Enter your DISCO and your units, and it applies the right slab rates for you.

  1. Find your DISCO and consumer type on your bill.
  2. Note your units, or your current and previous meter readings.
  3. Enter them in the calculator and press Calculate.

How to find your units from meter readings

Most bills show a current reading and a previous reading. Your units are simply:

Units used = current reading − previous reading

For example, if your current reading is 1,250 and your previous reading was 1,000, you used 250 units.

If your meter was replaced or reset during the month, the bill may show an adjustment — in that case, use the units printed on the bill itself. The calculator also accepts units directly, so you can type in that figure instead of doing the subtraction.

Also check the reading dates. A bill covering more than a month will show more units, and that can push you into a higher slab. Comparing units month to month is the simplest way to spot an unusual reading.

How slabs, FPA and QTA affect your bill

Electricity tariffs in Pakistan are charged in slabs, so the per-unit rate rises as your consumption grows. A household using only a small number of units pays a lower rate than one using several hundred. That is why two homes with the same DISCO can have very different per-unit costs.

Your bill also carries separate line items such as the Fuel Price Adjustment (FPA) and the Quarterly Tariff Adjustment (QTA). These adjust the bill for changes in fuel costs and tariff revisions, and they appear as their own lines rather than being folded into the per-unit rate.

The calculator breaks the result down so you can see the energy charges and the adjustments separately. That makes it easier to understand why a bill went up even when your units stayed the same.

  • Higher consumption pushes you into higher slabs.
  • FPA and QTA appear as separate lines on the bill.

Simple mode or Detailed mode

The calculator opens in Simple mode, which shows only three things: your DISCO, your units, and the Calculate button. It is the fastest way to get an estimate, and it suits most household bills.

Detailed mode opens the full form, with every field the tariff calculation can use. Switch to it when your bill has details that Simple mode does not ask for, such as a time-of-use breakdown with separate peak and off-peak units.

You can switch between the two modes at any time without losing what you entered. The result is the same either way — Detailed mode simply lets you describe the bill more precisely.

Read your bill from a photo

If you have a photo or scan of your bill, the Fill from Bill Photo button can read it for you. It picks out the DISCO, the consumer type, the units, the load in kW, the FPA and the QTA, and fills the form with what it found.

The reader never guesses. When a field is unclear or missing from the photo, it is marked as "not found", and you can type the value in yourself. Always review the filled values before you press Apply — a quick glance is enough to catch anything the photo did not show clearly.

The photo is only used to read the text on the bill. Once the values are in the form, the calculation runs the same way as a manual entry.

  1. Upload a clear photo of your bill.
  2. Check the filled values, then press Apply.
  3. Anything marked "not found" can be typed in by hand.

Try it yourself

Want your exact bill figure? Use the free Electricity Bill Calculator — no signup, no account. Enter your DISCO and units, or upload a photo of your bill and let it read the details.

FAQ

How do I calculate my electricity bill in Pakistan?

Enter your DISCO and the units you used in the month, then calculate. The tool applies the NEPRA tariffs under S.R.O. 279(I)/2026 for your DISCO and consumer type. If you only have meter readings, subtract the previous reading from the current reading to get your units.

What is a DISCO and why does it matter?

A DISCO is the distribution company that supplies electricity in your area — for example LESCO, IESCO or K-Electric. Tariffs differ by DISCO and by consumer type, so the calculator needs your DISCO to apply the right rates.

How do I find my units if I only have meter readings?

Subtract the previous meter reading from the current reading. The difference is the number of units (kWh) you used. You can enter either the readings or the units directly into the calculator.

What are FPA and QTA on my electricity bill?

FPA is the Fuel Price Adjustment and QTA is the Quarterly Tariff Adjustment. They are separate line items that adjust your bill for fuel cost changes and tariff revisions. The calculator reads them from your bill photo and includes them in the result.

Can I calculate my bill from a photo of it?

Yes. Use the Fill from Bill Photo button and upload a clear photo of your bill. The reader picks out your DISCO, consumer type, units, load, FPA and QTA. It marks anything unclear as "not found" instead of guessing, so review the values before you apply them.

Originally published at all-done.xyz.

Top comments (0)