DEV Community

Anoymask
Anoymask

Posted on

Elecbrakes: Unauthenticated BLE Commands Control Trailer Brakes; OTA Update Path Also Vulnerable

1. Basic Information

  • Article Name: Elecbrakes EB2, VM1, ELBC2000
  • Publisher: CISA
  • Published Date: 2026-11-19
  • Collection Date: 2026-11-21T07:45:23+09:00
  • Source: Primary Source
  • Related Sources: JVN roundup, Elecbrakes remote upgrade, Element Digital Research Report
  • Related CVEs: CVE-2026-96805, CVE-2026-125273, CVE-2026-124281
  • Affected Products: Elecbrakes EB2 <= 3.0.4.2.0, Elecbrakes VM1 < 1.3.4.2.1, Elecbrakes ELBC2000 all versions
  • Severity: Critical (Author's response priority)
  • Reason for Severity: Devices within BLE range can affect trailer brakes without authentication or pairing, directly impacting physical safety. CISA has not confirmed known damage, injury, or public exploitation.

2. Executive Summary

In EB2, VM1, and ELBC2000, three vulnerabilities may allow devices within BLE range to affect safety functions involving braking conditions, brake lights, and firmware through command injection or capture-replay. However, the firmware update path requires pairing in test environments, and writing or booting modified firmware remains unverified.

3. Attack Flow

The following paths correspond to the three CVEs. While CISA identifies EB2, VM1, and ELBC2000 as affected, the researcher-verified behaviors below are not generalized as successful exploitation across all models.

CVE-2026-96805: Unauthenticated BLE Commands for Brake Operation

  1. An attacker within BLE range sends commands to the control interface without authentication or pairing.
  2. Brakes can be engaged and disengaged. The researcher confirmed this behavior in their test environment.

CVE-2026-125273: Capture-Replay

  1. An attacker captures legitimate commands.
  2. Due to a lack of replay protection such as nonces or session tokens, commands can be replayed.
  3. The last command value persists even after reconnection. However, this does not mean braking is sustained; in the researcher's tests, brakes disengaged 2 to 5 seconds after disconnection.

CVE-2026-124281: Firmware Update Path

  1. In the researcher's tests, the OTA channel is accessed after Just Works pairing.
  2. Insufficiently protected update channels may lead to unauthorized firmware modification. The researcher performed writes to the OTA channel and static analysis, but did not verify writing or booting modified firmware.

4. Attacker Position and Execution Location

  • An adjacent attacker within the BLE communication range of the target controller.

5. Visibility for Victims and Administrators

Victims

  • Can physically manifest as abnormal brake responses, brake lights, or settings.

Administrators

  • Check the firmware version and settings shown in the app, service history, and vehicle events.

6. Success and Failure Conditions

Success Conditions

  • Affected controllers and versions
  • Within BLE range
  • For brake operation and replay paths, unauthenticated commands or captured commands can be sent. The OTA path requires Just Works pairing in the researcher's test environment, and writing or booting modified firmware remains unverified.

Failure/Mitigation Conditions

  • Update to EB2 3.0.4.4.3 or VM1 1.3.4.2.1. Since older EBR remotes become incompatible after the update, check the vendor's free V3 remote replacement procedure if applicable.
  • Evaluate vendor mitigations or discontinue operations for ELBC2000.
  • Regularly check firmware and brake settings.

7. What Happens Upon Success

  • Interference with trailer brake control
  • Disabling or modification of brake lights, braking conditions, and safety features
  • Potential for unauthorized firmware modification (writing and booting modified firmware unverified)
  • Risk of physical accidents

8. Observable Logs

  • Email: None specified
  • Proxy / SWG / DNS: None specified
  • Endpoint / EDR: Mobile app and controller firmware/version records
  • Identity / IdP: None specified
  • SaaS / Cloud: Vendor app update history (where available)
  • Network: Unknown device or replay patterns when BLE command capture is possible / unexpected brake events in vehicle telemetry

9. Determining Attack Success

Public Information

  • CVE-2026-96805: The researcher confirmed brake engagement and disengagement using unauthenticated commands in their own test environment. This is not a confirmation of exploitation as actual harm.
  • CVE-2026-125273: Lack of replay protection in commands and persistence of the last command value have been reported. Successful exploitation in real-world environments is unconfirmed.
  • CVE-2026-124281: Writing to the OTA channel after pairing and static analysis have been reported. Writing and booting modified firmware remain unverified.

Internal Evaluation Criteria

  • Cross-reference each CVE path with device responses and state changes, and rule out mechanical failures. CISA has not reported known public exploitation.

Distinguish between attempts, execution, privilege acquisition, information access, and subsequent compromise; do not judge a compromise successful based solely on a single IOC or request.

10. Investigation Playbook

  • Trigger: Unexpected brake behavior or vulnerable firmware
  • Initial Checks: Verify model, firmware, app version, and event timestamp / preserve vehicle and service records
  • Endpoint: Verify controller and mobile device configurations
  • Identity/Cloud: Verify vendor app accounts and update history
  • Follow-on: Check for firmware modifications, repeat events, and similar occurrences on other vehicles
  • Containment: Cease usage, apply patches, and request vendor inspection
  • Classification: Isolate mechanical faults, BLE commands, replays, and firmware modifications

11. Defense and Detection Ideas

  • Single Event: Unexpected brake commands/settings
  • Timeline: Correlate BLE proximity window -> brake setting changes -> physical events
  • Hunting: Cross-check model/firmware and abnormal events across the entire fleet
  • Log Gaps: Verify availability of BLE/controller telemetry
  • Priority Actions: Update EB2/VM1, address ELBC2000 risks

12. Facts / Inference / Hypothesis

Facts

  • CVE-2026-96805 is a command injection vulnerability where a device within BLE range can write to the control interface without authentication or pairing, affecting braking.
  • CVE-2026-125273 lacks replay protection such as sequence numbers, nonces, or session tokens, allowing captured commands to be replayed, with the last command persisting across sessions.
  • CVE-2026-124281 can allow unauthorized firmware modification via unprotected firmware update channels. In the researcher's tests, accessing the OTA channel required pairing, and writing or booting modified firmware remains unverified.
  • Update EB2 to version 3.0.4.4.3 and VM1 to version 1.3.4.2.1. ELBC2000 is no longer sold, and the vendor is evaluating mitigations.
  • Elecbrakes has not reported known damage or injury, and CISA has not confirmed known public exploitation.

Inference

  • None specified

Hypothesis

  • None. Do not assume victim scope or attack success beyond publicly disclosed information.

13. MITRE ATT&CK Mapping

ID Technique Confidence Basis
T0855 Unauthorized Command Message medium Commands can be sent to the control interface using unauthenticated BLE commands and replays. This is not an observation of actual exploitation.

14. Unknowns and Further Investigation

  • Permanent mitigations for ELBC2000
  • BLE attack range and vehicle conditions
  • Presence of actual exploitation

15. Impact on SOCs and Organizations

Organizations that use or import the affected trailer brake controllers should verify firmware versions and evaluate the operational continuity of ELBC2000 units.

16. Summary by Role

  • SOC: Due to limited BLE telemetry, verify firmware versions, brake setting inconsistencies, unexpected behavior, and service records.
  • Administrators: Update EB2/VM1 to patched versions, and conduct risk assessments and use restrictions for ELBC2000 until vendor mitigations are confirmed.
  • Users: Apply firmware updates via the application, and cease usage for inspection if abnormal braking behavior occurs.

Top comments (0)