DEV Community

Baodi Goldsun New Energy
Baodi Goldsun New Energy

Posted on Originally published at ytgoldsun.com

How Long Can Solar Street Lights Last on Cloudy or Rainy Days?

Cloudy and rainy weather is one of the practical challenges in solar street lighting projects. For project planners and lighting engineers, an important question is not simply how large the battery should be, but how the entire system manages energy when sunlight is limited.

A solar street light's operating time during poor weather depends on several factors, including battery capacity, LED power consumption, dimming schedules and solar panel output.

  1. Battery Capacity Determines Available Backup Energy

The battery stores energy collected by the solar panel during the day. When sunlight is insufficient, the stored energy becomes the main power source for nighttime operation.

However, nominal battery capacity does not represent the actual energy available to the LED light. Battery depth of discharge, conversion losses and battery aging should also be considered during system design.

For example, a 24V 120Ah battery has a nominal energy capacity of 2,880Wh. The usable energy will be lower after accounting for these factors.

  1. LED Power and Dimming Affect Nightly Consumption

LED power consumption directly affects how much energy a solar street light needs each night.

A 60W LED light operating at full power for 12 hours would consume 720Wh. However, a suitable dimming schedule can reduce total energy consumption while maintaining appropriate lighting levels.

Consider this example:

4 hours at 100% brightness: 60W

4 hours at 60% brightness: 36W

4 hours at 30% brightness: 18W

The total energy consumption is approximately 456Wh per night.

This illustrates why lighting schedules should be considered alongside battery capacity when planning backup time.

  1. Solar Panel Output Affects Battery Recovery

Battery backup time and battery recovery time are two different considerations.

During cloudy weather, solar panels may still generate electricity, although output can decrease significantly depending on cloud cover and local conditions.

After several days of poor weather, the system may need additional sunny days to restore the battery to a sufficient charge level.

Panel capacity, installation angle, shading, temperature and local solar resources all influence charging performance.

  1. A Practical Three-Night Backup Example

Let's look at a practical design example using a 60W solar street light system to understand how three-night backup time can be achieved without additional solar charging.

Assume the system consumes 456Wh per night under the dimming schedule described above.

For three nights:

456Wh × 3 = 1,368Wh

A 24V 120Ah battery has a nominal capacity of 2,880Wh. If we assume 80% usable depth of discharge, 90% discharge-path efficiency and 80% remaining capacity at the end of the design life, the estimated usable energy is:

2,880Wh × 80% × 90% × 80% = 1,659Wh

Under these illustrative assumptions, the available energy is sufficient for three nights of operation without additional solar charging.

This is a simplified engineering example, not a universal configuration. Actual system sizing should be based on the project's local weather conditions, lighting requirements and component specifications.

  1. What Should Engineers Consider When Designing for Rainy Regions?

For projects in regions with frequent cloudy or rainy weather, several factors deserve attention:

Local solar resources: Use solar radiation data from the least favorable design month rather than annual averages alone.

Battery sizing: Allow sufficient usable energy for the required backup period.

Lighting schedules: Consider adaptive dimming to balance lighting requirements and energy consumption.

Solar panel configuration: Select suitable panel capacity and installation angles for local conditions.

Battery recovery: Evaluate how quickly the system can recharge after prolonged periods of poor weather.

Final Thoughts

Reliable solar street lighting requires more than selecting a large battery or a high-power solar panel. Battery capacity, LED consumption, dimming strategy and local solar conditions must work together as a complete system.

At Baodi Goldsun, we focus on solar street lighting solutions for different outdoor lighting projects and environmental conditions. Understanding the local requirements is an important starting point for selecting a suitable configuration.

Top comments (0)