DEV Community

Calcrio
Calcrio

Posted on Originally published at calcrio.com

Cubic Yards, Explained: The Divide-by-27 Rule, Concrete Slabs, and the 10 10 Example

A 10-foot by 10-foot concrete slab, 3 inches deep, needs 0.93 cubic yards of concrete — so you order 1 cubic yard. That is the whole calculation — and the one most DIYers get wrong, because it hides three traps: inches that must become feet, a volume in cubic feet, and an answer in cubic yards. This post walks through the rule, the worked example, and the mistakes that cost real money at the concrete yard.

What a Cubic Yard Actually Is

A cubic yard is a cube 3 feet long, 3 feet wide, and 3 feet tall. Multiply those three sides — 3 × 3 × 3 — and you get 27. That is why 1 cubic yard equals 27 cubic feet, and why the number 27 is the heart of every cubic yard calculation. Concrete, topsoil, gravel, and mulch are all sold by the cubic yard, so the moment you can convert cubic feet to cubic yards, you can price any of them.

The trap is that a cubic yard is not 9 times a cubic foot, and it is not 3 times one. People hear "a yard is 3 feet" and divide by 3, or think of square yards and divide by 9. Both are wrong, and both are expensive: dividing by 9 instead of 27 triples your order. A free cubic yard calculator runs the same conversion instantly for any slab, driveway, or garden bed.

The Formula

Measure length, width, and depth in feet, multiply them, then divide by 27:

Cubic yards = (length × width × depth in feet) ÷ 27

Depth is almost always measured in inches, so convert it first: divide the inches by 12. Three inches is 0.25 feet, four inches is 0.33 feet, six inches is 0.5 feet. The shortcut folds the conversion in — 324 is just 27 × 12:

Cubic yards = (length × width × depth in inches) ÷ 324

Worked Example: The 10×10 Slab

Step by step, with the lead example:

  1. Convert the depth: 3 inches ÷ 12 = 0.25 feet
  2. Multiply length × width × depth: 10 × 10 × 0.25 = 25 cubic feet
  3. Divide by 27: 25 ÷ 27 = 0.93 cubic yards
  4. Round up: order 1 cubic yard

So a 10 ft × 10 ft slab at 3 inches deep needs 0.93 cubic yards — order 1. The same math at other sizes: a 12 ft × 20 ft driveway at 4 inches deep is 12 × 20 × (4 ÷ 12) = 80 cubic feet, and 80 ÷ 27 = 2.96 cubic yards, so order 3. A garden bed 8 ft × 4 ft at 6 inches deep is 8 × 4 × 0.5 = 16 cubic feet, and 16 ÷ 27 = 0.59 cubic yards, so order 1. The pattern never changes — measure in feet, multiply, divide by 27, round up.

The Depth Table Worth Memorizing

Most home projects use one of four depths, and their foot values are worth knowing by heart:

Depth In feet Use it for
2 inches 0.167 ft Walkways, thin overlays
3 inches 0.25 ft Shed slabs, light patios
4 inches 0.333 ft Driveways, standard slabs
6 inches 0.5 ft Heavy loads, garage floors

If your depth is not on the list, divide the inches by 12. The table is also a quick sanity check: if your answer looks wildly off, check the depth conversion first — that is where almost every wrong answer starts.

Bags or Bulk? The 45-Bag Rule

One 80-pound bag of concrete mix yields about 0.6 cubic feet. One cubic yard takes 27 ÷ 0.6 = 45 bags. Our 10×10 slab needs 25 cubic feet, which is 25 ÷ 0.6 = 41.7 — so 42 bags. A 60-pound bag yields about 0.45 cubic feet, so the same yard takes 60 bags. If the job needs more than about 30 bags, bulk delivery by the cubic yard is almost always cheaper — and far less lifting.

5 Mistakes That Cost Real Money

  1. Forgetting to convert inches to feet. Multiplying 10 × 10 × 3 gives 300, not 25 — twelve times too much concrete. Always divide the depth by 12 first.
  2. Dividing by 9 instead of 27. Nine is square yards; twenty-seven is cubic yards. Dividing by 9 triples your order and your bill.
  3. Ordering the exact amount. Order 10% extra — 0.93 cubic yards becomes about 1.02, which still rounds to 1, but a 2.96-yard driveway becomes 3.26, so order 3.5, not 3.
  4. Mixing feet and inches in the same multiplication. Length in feet and depth in inches in one product gives a nonsense number. Convert everything to feet first, then multiply.
  5. Guessing the depth. A slab poured at 4 inches instead of 3 needs a third more concrete — 25 cubic feet becomes 33.3.

The Bottom Line

One formula, one number: measure in feet, multiply length × width × depth, divide by 27, round up. A 10 ft × 10 ft slab at 3 inches deep is 25 cubic feet, which is 0.93 cubic yards — order 1. A 12 × 20 driveway at 4 inches is 2.96 — order 3. A 20 × 30 pour at 4 inches is 200 cubic feet, which is 7.41 cubic yards — order 8. To learn how to calculate cubic yards for your own project, run the steps above — or check your figure against the free cubic yard calculator in seconds.

Top comments (0)