DEV Community

Chris Reddington for Cloud with Chris

Posted on • Updated on • Originally published at

Using GPG Keys to sign Git Commits - Part 4

Cloud with Chris Logo

This post was originally published on Wed, Mar 17, 2021 at

Part 4 - The final part (at least for now, until I find somewhere else that we can expand on with this)! This part will focus on porting the keys that we have recently generated onto our YubiKey device. I own a YubiKey NEO, so I'll be using that.

Note: Be aware that the YubiKey NEO has a limitation where it can only hold keys up to a size of 2048 bits. If you have generated a key longer than this, then the move will fail. You may need to go through the previous blog posts to re-generate the keys. Though I mentioned this limitation in part 2.

The YubiKey itself is considered as a "smart card" device. When you plug your YubiKey in, you should see that it gets detected as YubiKey NEO with a combination of additional information, e.g. Yubikey NEO OTP+UTF+CCID. I believe when I originally set mine up, that I needed to download the YubiKey manager and switch modes as it didn't show up correctly. Let me know how you get on!

C:\Users\chris>gpg --card-status
Reader ...........: Yubico Yubikey NEO OTP U2F CCID 0
Application type .: OpenPGP
Version ..........: 2.0
Manufacturer .....: Yubico
Serial number ....: XXXXXXXX
Name of cardholder: Chris Reddington
Language prefs ...: en
Salutation .......:
URL of public key : [not set]
Login data .......: reddobowen
Signature PIN ....: forced
Key attributes ...: rsa2048 rsa2048 rsa2048
Max. PIN lengths .: 127 127 127
PIN retry counter : 3 3 3
Signature counter : 149
      created ....: 2021-02-10 17:21:57
Encryption key....: [none]
Authentication key: [none]
General key info..: sub  rsa2048/SUBKEYXXXXXXXXXX 2021-02-10 Chris Reddington <>
sec#  rsa2048/MAINKEYXXXXXXXXX  created: 2021-02-10  expires: never
ssb>  rsa2048/SUBKEYXXXXXXXXXX  created: 2021-02-10  expires: 2022-02-10
                                card-no: XXXX XXXXXXXX
Enter fullscreen mode Exit fullscreen mode

Note: A good pro-tip from Scott Hanselman at this stage. If you have access to multiple smart card readers (including Windows Hello), then you may need to include a reader-port in the scdaemon.conf file at %appdata%\gnupg\scdaemon.conf. This is a step that I had to complete, so thanks Scott for the heads up on this one!

To move the GPG Key to the YubiKey, we need to use the gpg commandline once again. If you have multiple keys on the machine, then you may need to use the toggle command in GPG to select the key that you want to move across. If you've been following the steps from these blog posts in order (So you've moved the certification key off of the machine and re-imported your signing subkey), then you shouldn't need to use this step. However, if you have multiple keys on your machine then take a look at Scott's blog above, as he shows this approach.

Make sure that you have backed up your keys before completing the next step (moving the key to the card). Keytocard is a destructive action (as also discussed over on this GitHub issue).

gpg --edit-key YourSubkeyHere
gpg (GnuPG) 2.2.27; Copyright (C) 2021 g10 Code GmbH
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

Secret subkeys are available.

     created: 2021-02-10  expires: never       usage: C
     trust: ultimate      validity: ultimate
     created: 2021-02-10  expires: 2022-02-10  usage: S
     card-no: XXXX XXXXXXXX
[ultimate] (1). Chris Reddington <>
[ultimate] (2)  Chris Reddington <>

gpg> keytocard
Really move the primary key? (y/N) y
Please select where to store the key:
   (1) Signature key
Your selection? 1

gpg> save
Enter fullscreen mode Exit fullscreen mode

Chris, if it's a destructive action - what happens if you need to copy the key onto another YubiKey device (or need to import it on the machine once again for some reason)? You can delete the secret key stubs from the machine completely, and then re-import the secret keys as shown in the previous step. Remember what we have discussed though around principal of least privilege and separation of concerns.

You'll also want to make sure that your YubiKey has the appropriate pins set up. As described in the YubiKey docs the default pin is 12345678 and the default admin pin is 12345678. As you can imagine, these aren't the hardest to guess - so make sure you take the time to change these, and remember them!

You can change the pins by running the below -

gpg --card-edit
gpg/card> admin
Admin commands are allowed

gpg/card> passwd

1 - change PIN
2 - unblock PIN
3 - change Admin PIN
4 - set the Reset Code
Q - quit

Your selection? 1
PIN changed.

1 - change PIN
2 - unblock PIN
3 - change Admin PIN
4 - set the Reset Code
Q - quit

Your selection? 3
PIN changed.
Enter fullscreen mode Exit fullscreen mode

Now, go ahead and try to make a signed commit in your local Git repository. I am making an assumption that you still have the Git configuration in place from part 3 which forces all commits to be signed by the signing GPG Key (as you specified the Key ID). Before making the commit, remove the YubiKey from your machine. Now make a change, stage it and commit it to your repository locally. You should see a slightly different prompt. I see something similar to the below -

Git Commit requires a Smartcard

Once you've inserted the YubiKey, you should then see a prompt to unlock the smartcard. Your prompts may look slightly different, depending upon what tool/executable is configured on your system to handle the pin entry.

Git Commit requires Smartcard Unlock to access key

Success! You've now used the GPG signing key that you generated in part 2, transferred it onto a YubiKey device and generated a signed commit as a result. At this stage, you may want to generate separate signing keys for different machines/different YubiKeys so that a compromise doesn't impact multiple devices. But, I will leave that to your discretion dear reader.

I hope that this series has been useful. Please let me know how you get on, and if there may be additional areas that are useful... Who knows, maybe a part 5?

So until the next blog post, bye for now!

Top comments (0)