One of the most prevalent causes of construction projects going over budget and over schedule is the lack of or incompleteness of drawings. If they don't have the details, contractors will guess, order changes accumulate and minor misunderstandings add up to rework that costs them. To resolve this, a full set of construction drawings will be taken into the job before the first shovel of soil is turned over. This article explores everything a full set entails, ranging from site and floor plans to structural and MEP sheets and even detail sheets, and how each element helps to maintain project accuracy, timelines and budgets.
What is a construction drawing set?
A construction drawing set is a set of technical drawings that provide information about how a building should be constructed. Consider it to be a common tongue. All the architects, engineers, contractors and building inspectors read from the same sheets and so everyone has access to the same information.
A set typically contains a cover sheet, a set of general notes, and drawings by discipline. Sheets are divided into sections by discipline, and each sheet has a number for easy identification.
These are the main parts of a complete drawing set.
Attach a cover sheet and drawing index.
The cover sheet is the front door of the set. It usually contains the project name, address, owner and the design team. It also contains a drawing index to enable readers to view all the sheets at once. Many sets will include a location map, a brief project description, and the relevant building codes.
This section contains general notes and symbols.
The general notes are provided immediately following the cover sheet to provide an explanation of the rules to be used throughout the project. Here are the symbols, legend, and abbreviations list also. They explain to the reader what the meaning of a line, hatch pattern or shorthand label is, reducing the confusion later.
Site Plan
The location plan (site plan) of the building is provided. This includes property lines and setbacks, driveways and walkways, utilities and landscaping. It also illustrates where the structure is located on the land. This sheet is frequently examined by the local authorities, as it is connected with the zoning and drainage needs.
Architectural Drawings
Most people would think of architectural drawings when they think of building plans. They demonstrate the appearance of the building and how people will flow through it. Typically, this group will contain:
• Room plans indicating room layout and doors and windows for each room and floor
• Plan views of the building exterior faces on each elevation.
• Floor heights and roof structure in building sections with a vertical cut through the structure.
• Building plans showing building elevations, roof plans, and roof equipment
• Reflected ceiling plans (ceiling plans, light plans, ceiling finishes)
Structural Drawings
Structural drawings describe how the building maintains its structure. They are prepared by a structural engineer and include foundations, columns, beams, floor framing and roof framing. They also include materials, sizes and connection information. If these sheets were not there, then builders would have no means to determine the safe path that the loads take to the ground.
Mechanical, Electrical, and Plumbing (MEP) Drawings
MEP drawings are drawings dealing with systems that help to make a building comfortable and usable.
• Mechanical drawings depict heating, ventilation and air conditioning designs, including ductwork and equipment.
• Electrical drawings depict power distribution, lighting, panels, outlets and low-voltage systems.
• Plumbing drawings include water supply, plumbing drainage, venting and plumbing fixtures.
These are usually accompanied by fire protection drawings indicating sprinklers and alarm systems when they are needed.
Detail Sheets
The difficult areas are expanded on, including areas where the wall interfaces with the foundation or how windows are flashed and sealed. Enlarged drawings of materials, dimensions and assembly steps. They can be the key to a well-appearing building or maintenance or one that fails because many leaks and failures start at poorly resolved joints.
Schedules
A schedule is a table used to maintain repetitive information in an easy-to-read and easy-to-understand format. Typical examples of these include a window schedule, a door schedule, a finish schedule and an equipment list. They are time-saving, since they allow builders to quickly look at the table rather than traverse the entire set.
Specifications
There are some specifications that are written documents, not drawings, but they are as important as a drawing and go with the set. They explain the quality of materials and performance requirements, as well as how materials can be installed. The drawings indicate the location of the various parts, but the specifications describe the nature of the parts and the method of their assembly.
A complete set is important for a variety of reasons.
There is a lot of work happening behind the scenes when the drawing set is well prepared.
- It helps ensure correct pricing. With all the information, the contractors can bid with confidence.
- It speeds up approvals. The set can be sent back to the permit applicant if it lacks some necessary information, but it can be checked for compliance by permit reviewers.
- It reduces mistakes. Avoiding clashes (e.g., duct running directly through a beam) will be facilitated by clear coordination between disciplines.
- It safeguards all parties involved. In the event of a misunderstanding, the set is the accepted testimony of the intended message.
The following are some tips for reviewing a drawing set.
There are several simple practices that anyone preparing to build can do to recognize potential issues early on:
• Check all of the disciplines are there and that the index agrees with the sheets.
• Check for uniformity of dimensions and room names on drawings.
• Verify notes and description.
• Before construction, consult the design team about any design that is not understood.
It's much cheaper to review at this point than after all the walls are up and in place.
Final Thoughts
A complete construction drawing set is much more than a stack of floor plans. It combines all the site, architectural, structural and MEP data, details, schedules and specifications in one place for all concerned to be able to build the same project. Knowing what to expect in a set can assist the owner with better questions, ease the eyes of new members reading the papers, and aid in projects coming to a successful conclusion.
For more details visit: www.designestimation.com

Top comments (0)