[Hack] PicoCTF: Low Level Binary Intro - Intro to Assembly

This PicoCTF Playlist section is called Intro to Assembly, the challenges will go deeper into assembly values, I've already played with some low level code like IDA and Microcorruption, but maybe it will be fun to revisit some concepts.

Bit-O-Asm-1

The first challenge is pretty simple, we have an assembly dump file, and we need to know what is the value in the EAX.

So, what is an assembly dump?
The files like and executable can be read as low level language, and this can be interpreted like a line by line command. This can be used for reverse engineering, taking these commands and transforming into C++ for example, so the users can understand and re-compile the original code.

With that in mind, the computer also have some registers, that store values for computer calculation, one of them is called EAX, and we need the value stored in them.

Here's the dump file:

<+0>:     endbr64 
<+4>:     push   rbp
<+5>:     mov    rbp,rsp
<+8>:     mov    DWORD PTR [rbp-0x4],edi
<+11>:    mov    QWORD PTR [rbp-0x10],rsi
<+15>:    mov    eax,0x30
<+20>:    pop    rbp
<+21>:    ret

The values in assembly works just like a variable in a programming language, so in line <+15> we have

MOV (move the value to)
EAX, 0x30 (from 0x30 to EAX, making EAX = 0x30)

But we actually need the decimal value, so we put it in our python script HexToDec.py, then we can have the answer:

python3 HexToDec.py 0x30

We take the result with picoCTF{value} and we have the flag:

Answer:Bit-O-Asm-1

picoCTF{48}

Bit-O-Asm-2

This one have the same solution and steps as the last one, actually all the challenges in this document have the same steps, with something more to it.

This one should teach that a value can be pointed to another address, in this case we want the value in EAX, but the value is actually a line above, that's because assembly can have relative addresses. The address is RBP(register) -0x4(minus 4 from the register address).

<+0>:     endbr64 
<+4>:     push   rbp
<+5>:     mov    rbp,rsp
<+8>:     mov    DWORD PTR [rbp-0x14],edi
<+11>:    mov    QWORD PTR [rbp-0x20],rsi
<+15>:    mov    DWORD PTR [rbp-0x4],0x9fe1a
<+22>:    mov    eax,DWORD PTR [rbp-0x4]
<+25>:    pop    rbp
<+26>:    ret

The solution is the decimal value of 0x9fe1a, so we put it in our python script HexToDec.py, then we can have the answer:

python3 HexToDec.py 0x9fe1a

Answer:Bit-O-Asm-2

picoCTF{654874}

Bit-O-Asm-3

This one teaches us operations, like multiplication and addition in assembly.

<+0>:     endbr64 
<+4>:     push   rbp
<+5>:     mov    rbp,rsp
<+8>:     mov    DWORD PTR [rbp-0x14],edi
<+11>:    mov    QWORD PTR [rbp-0x20],rsi
<+15>:    mov    DWORD PTR [rbp-0xc],0x9fe1a
<+22>:    mov    DWORD PTR [rbp-0x8],0x4
<+29>:    mov    eax,DWORD PTR [rbp-0xc]
<+32>:    imul   eax,DWORD PTR [rbp-0x8]
<+36>:    add    eax,0x1f5
<+41>:    mov    DWORD PTR [rbp-0x4],eax
<+44>:    mov    eax,DWORD PTR [rbp-0x4]
<+47>:    pop    rbp
<+48>:    ret

In this case we need to track where the EAX is/was, and can have the last result (because it will be modified through the dump file)

For multiplication and addition for Hex values, we will use python terminal and make the calculations there. Just type python in terminal/cmd and we are set:

At <+29> we have the set of value to EAX, value at address RBP-0xC
At <+15> the value to RBP-0xC is set to 0x9fe1a, making EAX=0x9fe1a
At <+32> the EAX is multiplied by the value at address RBP-0x8
At <+22> the value to RBP-0x8 is set to 0x4, making EAX=0x9fe1a*0x4 = 0x27F868
At <+36> we have the value 0x1f5 added to EAX, making it EAX=0x27F868+0x1f5 = 0x27FA5D

The solution is the decimal value of 0x27FA5D, so we put it in our python script HexToDec.py, then we can have the answer:

python3 HexToDec.py 0x27FA5D

Answer:Bit-O-Asm-3

picoCTF{2619997}

Bit-O-Asm-4

This one teaches us comparisons and branching code (also known as if, elseif, else) and jumps.

<+0>:     endbr64 
<+4>:     push   rbp
<+5>:     mov    rbp,rsp
<+8>:     mov    DWORD PTR [rbp-0x14],edi
<+11>:    mov    QWORD PTR [rbp-0x20],rsi
<+15>:    mov    DWORD PTR [rbp-0x4],0x9fe1a
<+22>:    cmp    DWORD PTR [rbp-0x4],0x2710
<+29>:    jle    0x55555555514e <main+37>
<+31>:    sub    DWORD PTR [rbp-0x4],0x65
<+35>:    jmp    0x555555555152 <main+41>
<+37>:    add    DWORD PTR [rbp-0x4],0x65
<+41>:    mov    eax,DWORD PTR [rbp-0x4]
<+44>:    pop    rbp
<+45>:    ret

At the line <+22> it compares(CMP) the values at RBP-0x4 address and 0x2710 and the result will be stored.
At the line <+29> it checks the Compare operation if the result is equal or less of the last values [other way to see is (RBP-0x4) <= 0x2710]. If it's true (if RBP-0x4 is less or equal 0x2710) then jump to the line <+37>, if it does not, then keep going through the line <+31>

This is kinda difficult to explain, but the J in jmp or jle means jump, that's kinda a GOTO another line. And the cmp is a Compare, something like an IF command.

Going step by step:

Line <+22> Compare the RBP-0x4 address and 0x2710 values
Line <+15> Set value at RBP-0x4 address to 0x9fe1a, making the comparison 0x2710 and 0x9fe1a
Line <+29> Compare if 0x9fe1a is equal or less than 0x2710, it is not, the statement is false, so No Jump happens
Line <+31> subtract (SUB) value at RBP-0x4 address by 0x65, making it RBP-0x4=0x9fe1a-0x65 = 0x9FDB5
Line <+35> Jump (jmp) to the line <+41>
Line <+41> Set EAX value as the value at RBP-0x4. So EAX=0x9FDB5