Your window settings contradict themselves — usually Xmin is bigger than Xmax. One reset puts them right.
Your TI-84 just stopped you with ERR:WINDOW RANGE, right in the middle of graphing. The function is fine. The numbers are fine. The problem is the window itself — the settings that tell the calculator which part of the graph to draw contradict each other, so it can't draw anything at all.
The good news: this is one of the easiest TI-84 errors to fix. It takes about 10 seconds, and you don't even need to diagnose it first.
What ERR:WINDOW RANGE means
The graph window is defined by Xmin, Xmax, Ymin, Ymax (and Xscl, Yscl, the tick-mark spacing). The rule is simple: Xmin must be less than Xmax, and Ymin must be less than Ymax. Break that rule and the calculator can't draw a graph — hence the error.
Cause 1: Min bigger than max
You — or a zoom operation — set Xmin=10 and Xmax=-10, or Ymin=5 and Ymax=5. The calculator sees an impossible window.
Fix: Press WINDOW and check the four values. Make sure Xmin < Xmax and Ymin < Ymax. The fastest fix is the reset below.
Cause 2: Xscl or Yscl set to zero (or negative)
The scale values (Xscl, Yscl) control tick-mark spacing. Setting them to 0 or a negative number is invalid and can trigger ERR:WINDOW RANGE on some OS versions.
Fix: In the WINDOW menu, set Xscl=1 and Yscl=1 — or just hit the reset below, which fixes both causes at once.
The 10-second fix
Don't even bother diagnosing: press ZOOM (the key right above TRACE), use the arrow keys to highlight 6:ZStandard, and press ENTER. This resets the entire window to sane defaults — Xmin=-10, Xmax=10, Ymin=-10, Ymax=10, Xscl=1, Yscl=1 — and clears ERR:WINDOW RANGE in virtually every case. Press GRAPH to confirm your function draws.
If the graph is still blank afterward, that's a different problem — the graph-not-showing guide covers it. For a custom view, press WINDOW, type your own Xmin, Xmax, Ymin, and Ymax values (pressing ENTER after each), then press GRAPH.
Useful presets once you're back
ZStandard is only a starting point. ZDecimal (ZOOM → 4) steps the window in clean 0.1 increments, ZInteger (ZOOM → 8) uses whole-number scales, and ZSquare (ZOOM → 5) keeps proportions true — the standard window stretches circles into ovals, ZSquare keeps them round.
The three answers everyone asks
What does ERR:WINDOW RANGE mean on a TI-84? Your window settings are impossible — usually Xmin is greater than Xmax, or Ymin is greater than Ymax. The calculator can't draw a graph with those settings.
How do I reset the window on TI-84? Press ZOOM, then 6 (ZStandard). It restores Xmin=-10, Xmax=10, Ymin=-10, Ymax=10 and clears the error.
Why did my window settings change by themselves? Zoom operations (Zoom In, Zoom Out, Zoom Box) and some apps modify the window. If a zoom goes wrong, just reset with ZOOM → 6.
The full step-by-step guide, with both causes and the presets, is here: the full ERR:WINDOW RANGE walkthrough with both causes
An independent study guide — not affiliated with or endorsed by Texas Instruments.
Top comments (0)