DEV Community

Khalid Balouch
Khalid Balouch

Posted on

192.168.100.1 Not Working? How to Find Your Real Gateway Address

You type 192.168.100.1 into your browser, hit Enter, and... nothing. The page times out, your browser searches for it instead, or you land on an error page. It is a frustratingly common experience, and it usually does not mean your router is broken. It usually means 192.168.100.1 is not your router's address at all — or that a small mistake is getting in the way.

What is 192.168.100.1?

192.168.100.1 is a private IP address, and it is a common default gateway for many ISP-supplied routers and cable modems. When your router uses it, typing it into a browser connected to that router should open the admin login page, where you can change the Wi-Fi name and password, check connected devices, update firmware, and adjust security settings.

The key word is "when." Router makers and internet providers choose different defaults. Some use 192.168.0.1, others 192.168.1.1, 10.0.0.1, or another private address entirely. If your router uses a different gateway, 192.168.100.1 will never load — no matter how many times you retry it. That is why the first step is not to keep guessing, but to find your real gateway address. For a full reference on this address, including default credentials and troubleshooting, see WiFi Router Zone.

How to find your real gateway address

Your computer or phone already knows the answer. It is listed as the default gateway for your current network connection.

On Windows: Press Win + R, type cmd, and press Enter. In the Command Prompt, type ipconfig and press Enter. Look for your active connection — Wi-Fi or Ethernet — and read the "Default Gateway" line. That address is your router. If it says 192.168.100.1, you were using the right address all along and something else is wrong. If it says something else, use that address instead.

On Mac: Open System Settings, go to Network, select your active Wi-Fi or Ethernet connection, click Details, then TCP/IP. The "Router" field shows your gateway address.

On a phone: Connect to your home Wi-Fi, open Wi-Fi settings, tap your connected network, and look for "Router" on iPhone or "Gateway" on Android. The address shown there is the one to type into your browser.

Write the address down exactly, then type it into the address bar — not a search box — on a device connected to the same network.

Common mistakes that break the login page

A surprising number of failures come down to typos and connection issues:

  • The letter O instead of zero: It is 192.168.100.1, with the digit 0. Typing 192.168.1OO.1 or similar will fail every time.
  • Adding www or .com: This is an IP address, not a website. Type http://192.168.100.1 with no www and no .com.
  • Using mobile data: A private IP address only exists on your local network. If your phone is on mobile data instead of Wi-Fi, or your laptop is on a different network, the address is unreachable. Switch to the router's Wi-Fi first.
  • Typing it into a search engine: If the address lands in Google's search box, you will get search results, not a login page. Use the browser's address bar.
  • A loose cable or a router that needs a restart: If you are wired in, check the cable. If nothing loads, power-cycle the router — unplug it for 30 seconds, plug it back in, and wait for it to fully boot before trying again.

If the address still does not load after all that, your router may simply use a different gateway. Go back to the ipconfig or Network steps above and trust what your device reports.

Once the login page loads

When the login page finally appears, you will need the admin username and password. Do not guess them repeatedly — after too many failed attempts some routers lock you out temporarily. The defaults are printed on the label on the bottom or back of the router, often alongside the default Wi-Fi name and password. Common defaults include admin/admin or admin/password, but your label is the authoritative source.

Once you are in, change two things right away: the admin password and the Wi-Fi password. The admin password protects the settings themselves, and a strong, unique Wi-Fi password keeps neighbours and strangers off your network. While you are there, check for a firmware update and review the list of connected devices for anything you do not recognise.

For a step-by-step companion to this guide, including login details and more troubleshooting, see this companion walkthrough.

The bottom line

"192.168.100.1 not working" almost always has a simple explanation: it is the wrong gateway for your router, it was typed incorrectly, or you are not on the right network. Find the real gateway with ipconfig or your network settings, type it carefully into the address bar, and you will usually reach the login page in under a minute.

Top comments (0)