If you have just had JioFiber installed, the router login can be confusing — not because it is difficult, but because JioFiber asks for different passwords in different places. The Admin password and the Guest password are not the same thing, and using the wrong one is the most common reason the login fails.
The address: 192.168.29.1
JioFiber routers use 192.168.29.1 as their admin address. Type http://192.168.29.1 into your browser while connected to your JioFiber Wi-Fi or by Ethernet cable. If that address does not load, check the label on your router or ONT, and confirm the Default Gateway with ipconfig on Windows. Do not use 192.168.1.1 or 192.168.0.1 for JioFiber — those belong to other brands and will not open your JioFiber settings.
Admin password vs Guest password
On the JioFiber login page you will usually see a choice between Admin and Guest, or two different login options:
- Admin password: This opens the full router settings — Wi-Fi name and password, connected devices, parental controls, and advanced options. Only the account holder should know this. On many JioFiber routers the default Admin password is printed on the label on the bottom of the device, and it is often different from the Wi-Fi password.
- Guest password: This gives limited access, or in some setups it is simply the password a guest uses to join a separate guest Wi-Fi network. It does not let someone change your main settings.
If you try the Guest password where the Admin password is expected, the page will reject it or show you a limited screen with almost nothing to change. That does not mean the password is wrong — it means you are using the wrong type of password for that login. Check which option is selected before you type anything, and use the password printed on your router label for the Admin login.
Change the Admin password after your first login, and keep it separate from your Wi-Fi password. Write both down somewhere safe: if you forget the Admin password, the only fix is usually a factory reset, which wipes your settings.
Logging in from your phone
You can also manage JioFiber from the MyJio app, which is often easier than the browser login for everyday tasks such as checking data usage or restarting the router. The browser login at 192.168.29.1 is still the place to go for deeper settings, such as changing the Wi-Fi channel, setting up a guest network, or checking which devices are connected.
To log in from a phone browser, connect to your JioFiber Wi-Fi first — mobile data will not work — then open http://192.168.29.1, choose Admin, and enter the Admin password from the label.
JioFiber vs JioAirFiber are different products
This trips up a lot of people. JioFiber is a wired fibre connection that comes into your home through a fibre cable and an ONT or router. JioAirFiber is a wireless service that uses a 5G signal and a different outdoor/indoor unit. They have different hardware, different apps and setup flows, and different support routes. A JioFiber login guide will not match a JioAirFiber device, so make sure you know which service you have before following any login steps. If your device says AirFiber on it, look for AirFiber-specific instructions instead.
For the full JioFiber walkthrough, including the first-login steps and where to find the Admin password, see WiFi Router Zone.
For help working out which local address your own router uses, see my earlier guide: 192.168.100.1 Not Working? How to Find Your Real Gateway Address
Quick checklist
- Connect to JioFiber Wi-Fi or Ethernet, and turn off your VPN.
- Open http://192.168.29.1.
- Choose Admin, not Guest.
- Enter the Admin password from the router label.
- Change your Wi-Fi password and your Admin password, and save both somewhere safe.
Top comments (0)