DEV Community

PAVO Power
PAVO Power

Posted on

Volvo Trailer Diesel Generators: Choosing Between the 100 kVA and 131 kVA PAVO Sets

Mobile power is a different problem from fixed standby power. A generator that lives on a trailer has to be easy to tow, quick to connect, quiet enough for the place it is parked, and dependable after days or weeks of sitting idle. PAVO, the diesel generator brand of Anhui Pavo Electric Technology Co., Ltd., builds two trailer sets around Volvo engines: the PWV-100GFT and the PWV-105GFS. This guide walks through what the two published product pages say about each set, how they differ, and how to decide which one fits a project. Every figure below comes from the manufacturer's own pages on pavoglobe.com; nothing has been estimated or added.

Why a Volvo engine on a trailer

PAVO lists Volvo among the international engine makers it works with, alongside Cummins, MTU, Perkins, Shanghai Diesel (SDEC), Yuchai and Weichai. On its trailer range the company pairs Volvo engines with a four-stroke, water-cooled layout, an AC rotating exciter and three-phase output. Both Volvo trailer models are described as self-starting diesel generators of the "low noise automation type", which means the set is designed to start, run and protect itself from its digital controller rather than relying on someone standing next to it.

For buyers who rent equipment out, serve construction or utility crews, or need to move standby capacity between sites, those traits matter more than raw size. A trailer set that starts reliably and reports its own faults saves a site visit every time.

Model 1: PWV-100GFT, 100 kVA Volvo silent trailer set

The PWV-100GFT is PAVO's 100 kVA Volvo trailer diesel generator. Its product page lists the following:

  • Rating: 100 kVA / 80 kW
  • Engine: Volvo TAD531GE / TAD551GE
  • Output: three-phase, 50/60 Hz, 400/380 V or 415/440 V
  • Speed: 1500 rpm and 1800 rpm
  • Controller: Deepsea or Smartgen
  • Alternator: listed as Pavo on the model data
  • Standards: ISO 8528 and GB/T 2820-1997
  • Certificates: ISO, CE, SGS and CoC
  • Canopy: open, soundproof or containerized
  • Options: ATS, circuit breaker, parallel operation, remote control panel
  • Weight: 2600 kg; set dimensions 2900 × 1700 × 2600 mm
  • Package: 420 × 160 × 215 cm, gross weight 5200 kg, wrapping film
  • Warranty and service: 1 year or 1000 working hours

The page frames this set for industrial manufacturing plants. In that role, it describes a generator that "carries the critical board on standby, waits weeks between runs, and then has to take load within seconds of a mains failure." That is a useful way to think about the PWV-100GFT: it is a standby machine first, one that happens to be mobile, so it can be moved to the next building or the next site when needs change.

The Deepsea or Smartgen controller handles automatic mains failure (AMF) start, protection and event logging, according to the page. Parallel operation and remote monitoring can be added when more than one unit shares a load, which is relevant if a site later grows past what one 80 kW set can carry.

Model 2: PWV-105GFS, 131 kVA Volvo trailer set

The PWV-105GFS is PAVO's 131 kVA Volvo trailer diesel generator. Its product page lists:

  • Rating: 131 kVA / 105 kW
  • Engine: Volvo TAD750GE
  • Output: three-phase
  • Speed: 1500 rpm and 1800 rpm
  • Conditions of use: trailer type
  • Usage: common units, standby units and emergency crew
  • Weight: 2200 kg; set dimensions 3000 × 1180 × 1750 mm
  • Package: 300 × 118 × 175 cm, gross weight 2200 kg, plastic wrap
  • Warranty: 1 year or 1000 hours, with global after-sales service

The page positions this model for water treatment facilities. It explains that the 131 kVA / 105 kW frame "is large enough to ride through motor starting on the essential board and still economical enough to run through a long outage without burning through the fuel budget." Pumps are motor loads, and motor starting is often what decides generator size, so that sentence is the core of the sizing logic for utility customers.

As with the smaller set, the page says most orders ship with an open, soundproof or containerized canopy and a Deepsea or Smartgen panel. An ATS, circuit breaker or remote monitoring is added at the ordering stage, and ISO, CE and SGS documents are prepared alongside the set.

Side-by-side: what actually differs

Putting the two pages next to each other gives a clear picture.

PWV-100GFT PWV-105GFS
Rating 100 kVA / 80 kW 131 kVA / 105 kW
Volvo engine TAD531GE / TAD551GE TAD750GE
Listed weight 2600 kg 2200 kg
Set dimensions 2900 × 1700 × 2600 mm 3000 × 1180 × 1750 mm
Example application on page Industrial manufacturing plants Water treatment facilities
Usage listed Common units Common, standby, emergency crew

Two points stand out. First, the larger-rated PWV-105GFS is listed as lighter and noticeably lower and narrower than the PWV-100GFT. The PWV-100GFT is described as a "silent" trailer set, and its taller, wider envelope is consistent with a fuller acoustic enclosure. Second, the PWV-105GFS explicitly lists "emergency crew" usage, which suits utility and municipal teams that roll a generator out to a fault rather than leaving it parked in one place.

How to choose between them

The product pages give enough information to frame the decision around four questions.

1. What is the largest motor or step load? If the generator will start pumps, compressors or other motor loads, the extra 25 kW of the PWV-105GFS gives more headroom. That is exactly the argument the page makes for water treatment.

2. How sensitive is the location to noise? Both sets are described as low-noise automation types, but the PWV-100GFT is the model PAVO calls a silent trailer set. For sites near offices, hospitals or homes, start the conversation with the silent model and confirm the enclosure option when ordering.

3. How will it be moved and stored? The listed dimensions and weights differ, so check the trailer envelope against gate widths, parking bays and towing vehicles before ordering.

4. Will more than one set share the load? Both pages list parallel operation as an option. Two smaller sets in parallel can sometimes serve a site better than one large one, because one unit can keep running while the other is serviced.

Controls, standards and paperwork

For international buyers, documentation often takes longer than manufacturing. PAVO's pages state that its sets are built to ISO 8528 and GB/T 2820-1997 and carry ISO, CE, SGS and CoC certificates, with the paperwork issued with the set. The controller choice is Deepsea or Smartgen on the model data, and the general specification tables on the same pages also mention Comaq controllers and Leroy Somer, Marathon and Mecc Alte alternators as configurable options. Buyers should confirm the exact alternator and controller in the quotation so that the paperwork matches what ships.

Voltage is listed as 400/380 V or 415/440 V on the model data, while the general specification table says voltage from 110 V to 480 V is available as required. Frequency is 50/60 Hz, with speeds of 1500 rpm and 1800 rpm, which covers both 50 Hz and 60 Hz grids.

Lead time, warranty and service

According to PAVO's product pages:

  • Average lead time is within 15 workdays in both peak and off-peak seasons; the FAQ gives delivery as 7 to 15 or 15 to 25 working days depending on the order.
  • Payment is 30% T/T deposit with the 70% balance before shipment; accepted terms include LC, T/T, PayPal and Western Union, with FOB, CIF and CFR Incoterms.
  • The nearest ports are Shanghai Port and Wuhu Port.
  • Warranty is one year or 1000 running hours, whichever comes first, with lifetime maintenance; the company says the warranty can be extended for some special projects.
  • Production capacity is listed at 30 sets per month for these models, with OEM and ODM customization available.

About the manufacturer

Anhui Pavo Electric Technology Co., Ltd. was established in 2014 in Wuhu, Anhui Province, China. The company develops, produces, sells and services diesel generator sets from 9 kVA to 3750 kVA, and its range includes standard open sets, silent sets, mobile trailer units, containerized units, vehicle-mounted power stations and high-voltage units. It operates a CNC machining center, an intelligent generator testing center and an after-sales service center stocked with spare parts. PAVO equipment is used in telecommunications, expressways, healthcare, industrial and mining operations, aviation, roads and bridges, hospitality and municipal projects.

For quotations, full specification sheets and canopy options, visit PAVO or contact the team at info@pavoglobe.com or +852 9170 5519 (WhatsApp).

Key takeaways

  • PAVO offers two Volvo-powered trailer generators: the PWV-100GFT (100 kVA / 80 kW, TAD531GE/TAD551GE) and the PWV-105GFS (131 kVA / 105 kW, TAD750GE).
  • The PWV-100GFT is the silent trailer model and is framed for standby duty at manufacturing plants.
  • The PWV-105GFS gives more headroom for motor starting and is framed for water treatment and emergency crews.
  • Both run at 1500/1800 rpm for 50/60 Hz, use Deepsea or Smartgen control, and are built to ISO 8528 and GB/T 2820-1997 with ISO, CE, SGS and CoC certificates.
  • Options include ATS, circuit breakers, parallel operation, remote control and chosen at the ordering stage.

Top comments (0)