DEV Community

Sam Tech Writer
Sam Tech Writer

Posted on

Peplink SD-WAN for Satellite Networks: A Practical Configuration Guide

When you combine a OneWeb LEO satellite path with a traditional GEO VSAT backup on a vessel or remote energy site, the question becomes how to manage the two links intelligently so the whole system behaves as a single reliable connection rather than two separate WAN links that require manual switching.

This is where Peplink SD-WAN comes in. The Peplink Balance router series with SpeedFusion WAN bonding does three things that matter in satellite network contexts:

1. Hot Failover Without Session Drops

SpeedFusion maintains an encrypted tunnel from the vessel router to a FusionHub server in the cloud. All traffic flows through that tunnel, so when the primary LEO link degrades or fails, traffic shifts to the GEO backup path without the tunnel dropping. Applications see continuity. SCADA sessions stay connected. Video calls do not reset.

2. Bandwidth Aggregation

When both links are healthy, SpeedFusion can bond them into a single higher-throughput pipe. For a vessel with both OneWeb and a GEO VSAT path active, that means the aggregate bandwidth is available rather than just the primary link's allocation.

3. Quality-Based Routing

Peplink's link health monitoring tracks latency, jitter, and packet loss on each WAN link in real time. Business rules can route latency-sensitive traffic (SCADA, video calls) to the LEO path and bulk transfer traffic (software updates, log uploads) to the GEO path, optimizing link utilization across both.

The configuration details and hardware selection guidance for satellite network deployments in the Gulf region are available through GCCSAT, who build managed hybrid satellite solutions using this exact architecture. Their engineers handle the FusionHub configuration and ongoing NOC monitoring that make the system perform as intended rather than as a theoretical spec.

Top comments (0)