DEV Community

Trezy
Trezy

Posted on • Updated on • Originally published at trezy.com

On Dropdown Menu Transitions

This article was originally published on 01 March, 2014 at Trezy.com.

The CSS transition property allows for a lot of really cool effects in your design but it has definitely caused me to bang my head against the desk a few times. Here are some details about the transition property that aren’t very well documented.

Disclaimer: At the time of this writing transitions still require browser prefixes to work for Firefox (-moz-), Opera (-o-), and Webkit (-webkit-). I have omitted them from the code examples here for readability, but they will be required if you intend to use these techniques.

The long and the short of it

The transition can be broken into several different properties or used in its shorthand form. You can even mix and match depending on what you prefer. The different transition properties that exist are:

Each of the longhand properties also have their own shorthand form:

div {
 background-color: #2f2;
 color: #090;
 transition-property: background-color, color;
 transition-duration: 1s, .5s;
 transition-timing-function: ease, steps(4,start);
 transition-delay: 0s, .5s;
}

div:hover {
 background-color: #fff;
 color: #000;
}
Enter fullscreen mode Exit fullscreen mode

Keep in mind that you don’t have to have multiple values for each property. If we were to change transition-duration: 1s, .5s; to transition-duration: 1s; then both transitions would use the same duration value. Personally, I prefer the shorthand property because it looks cleaner and it takes less code:

transition: <transition-property> | <transition-duration> | <transition-timing-function> | <transition-delay>;
Enter fullscreen mode Exit fullscreen mode

The timing-function and delay are both optional in the shorthand version. Here’s an example:

div {
 background-color: #2f2;
 color: #090;
 transition-property:
   background-color 1s,
   color .5s;
}

div:hover {
 background-color: #fff;
 color: #000;
}
Enter fullscreen mode Exit fullscreen mode

Both of these blocks of code will create the same functionality so it’s entirely a matter of preference. A final thing of note for transition-property is that if you don’t change anything between states other than the properties you want animated, you can use all in place of a list of properties.

Transitions swing both ways

It wasn’t until I read this article from Louis Lazarus that I realized I could use different transitions for different states. If a transition is applied to just one state of an object like in the code examples above it will activate on :hover (or whatever state you choose) and reverse when the state changes back. However, if each state has a different transition property, it will be applied to the incoming transition. For example:

div:not(.menu):before {
 background-color: #ddd;
 border-radius: 10px;
 color: #333;
 content: 'Hover me to see the menu';
 padding: 10px;
}

div .menu {
 background: #88b;
 max-height: 0;
 -webkit-transition:
   max-height .5s ease .5s,
   max-width .5s ease 0s;
 max-width: 10px;
 overflow: hidden;
}

div .menu a {
 color: #fff;
 text-decoration: none;
}

div:hover .menu {
 max-height: 999px;
 -webkit-transition:
   max-height .5s ease 0s,
   max-width .5s ease .5s;
 max-width: 999px;
}
Enter fullscreen mode Exit fullscreen mode

In this example when you mouse over the .menu’s parent div its first transition will come from the div:hover .menu rule. First, it will grow vertically, then it will grow horizontally. When you mouse off the parent div (or the menu) the .menu will take it’s transition from the div .menu rule, first shrinking horizontally, then growing vertically. It’s a little bit confusing but super cool!

It’s all in the timing

The timing-functions will be familiar to flash developers and video editors that customize the easing on their transitions, timing, and other effects, but they’re likely a foreign concept to most web designers. These functions are already well-described on MDN and in the W3C spec so I’ll just give a brief description of each them here.

ease

This is the default setting for timing-function so unless you’re using the longhand transition-timing-function with multiple properties, declaring it is unnecessary. It will ease both the in and out points of the animation with a slightly sharper curve on the in than the out. Basically it’s faster in the middle than at the beginning or the end, and the beginning accelerates a little faster than the end.

ease-in

This is similar to ease but it has a longer in point curve (slower acceleration) and an abrupt stop.

ease-out

The opposite of ease-in, this has a longer out point curve (slower… slowing?). Basically it starts abruptly and slows down as it gets closer to the end.

ease-in-out

I thought the existence of this one was odd since we already have the basic ease function. However, there is a slight difference. ease-in-out actually has an equal in and out curve, whereas ease has a slightly sharper in curve. The actual animation will have an equally slow beginning and end.

linear

This function has a straight line from beginning to end. This means it will have an unchanging speed with an abrupt start and stop.

step-start / step-end

What the purpose of these two functions is, I have no idea. I am sure that they have their uses somewhere. With step-start, it will make the switch for the transition at the beginning of the duration, then does nothing until the end of the duration. The step-end function does the opposite, waiting for the end of the duration, then applying the changes suddenly. These are not smooth transitions at all but rather changes with delays built in.

steps(number_of_steps, direction)

Much more useful than the previous step functions, steps() allows you to spread your animation across several abrupt changes for the duration of your transition. Here’s an example:

a {
 transition: steps(4, start) 1s;
 width: 100px;
}

a:hover {
 width: 200px;
}
Enter fullscreen mode Exit fullscreen mode

When hovering over this link it would immediately grow incrementally from 100px to 200px instead of moving through a smooth transition. These are literally immediate transitions, similar to if there were no transition at all. The direction (in this case start) is the same as the suffixes for step-start and step-end, determining whether the changes begin at the beginning or end of each step. The default value for direction is end but the parameter is not optional so steps(2) will not work.

cubic-bezier(x1, y1, x2, y2)

This is the mother of all timing-functions, giving you ultimate control over the timing of your transitions. All of the other functions except for steps() can be defined using cubic-bezier(). However, it can be extremely complicated, so I’ll leave you to your own devices here. I highly recommend checking out the MDN article about it for a really brilliant explanation.

Conclusion

Talk about dissemination of information, these dogs are cooked! And by dogs I mean fingers. Not that I have huge fingers or anything, just… are you calling me fat? Anywho, leave a comment if you have any questions or if you figure out some super awesome combination of transitions.

Top comments (0)