DEV Community

Cover image for Refactoring CSS into a Sass mixin
Bryan Robinson
Bryan Robinson

Posted on • Originally published at bryanlrobinson.com on

Refactoring CSS into a Sass mixin

I’ve begun live-streaming office hours every week. In my first effort at it, I mostly just worked on this site’s code. I decided to create a new promo style for articles and realized I needed to refactor some of my Sass.

It struck me as I was writing a new Sass mixin that there may be designers and developers out there that haven’t translated vanilla CSS into a Sass function. In this article, I want to show how to take often-used CSS and convert it into a DRY (Don’t Repeat Yourself) Sass mixin.

The Starting CSS

Usually when I talk about Sass mixins, I like to show the power on buttons. That’s not always the most applicable use case, though. In this instance, we’ll take the “interesting border” concept from my “Top 3 uses of ::before and ::after” and convert it to a reusable Sass component.

In this case, we need to affect four main elements with our CSS. The parent element, a universal (*) set of elements inside the parent and a ::before and ::after pseudo-element.

.article-promo {
    position: relative;
    padding: 20px;
}
.article-promo > * {
    z-index: 100;
    position: relative;
}
.article-promo::before {
    background-color: white;
    content: "";
    display: block;
    position: absolute;
    top: 10px;
    left: 10px;
    width: calc(100% - 20px);
    height: calc(100% - 20px);
    z-index: 0;
}
.article-promo::after {
    background-image: linear-gradient(120deg, #eaee44, #33d0ff);
    content: "";
    display: block;
    position: absolute;
    top: 0;
    left: 0;
    width: 100%;
    height: 100%;
    z-index: 0;
    mix-blend-mode: screen;
}
Enter fullscreen mode Exit fullscreen mode

Taking a look at this code, you can see that it would be a lot to create by hand every time we wanted to do a different gradient border.

Step 1: Identify potential Sass variables

One of the best reasons to start using Sass is its variables. In this case, we’re going to use variables to create customizable properties for our border.

I’ll start by finding things I want to change on a per-implementation.

For a gradient border, I’ll want to adjust the “border size,” the start color, the end color, original background color and the direction of the gradient.

Let’s move those values out into variables at the top of our CSS.

$border-size: 10px;
$original-background-color: white;  
$gradient-start-color: #eaee44;  
$gradient-end-color: #33d0ff;  
$gradient-direction: 120deg;
Enter fullscreen mode Exit fullscreen mode

Where we were originally using static values, we’ll now replace those with the variables.

.article-promo::before {
    ...
    background-color: $original-background-color;
    top: $gradient-size;
    left: $gradient-size;
    width: calc(100% - #{$gradient-border-size * 2});
    height: calc(100% - #{$gradient-border-size * 2});
    ...
}

.article-promo::after {
     background-image: linear-gradient($gradient-direction, $gradient-start-color, $gradient-end-color);
}
Enter fullscreen mode Exit fullscreen mode

Note the #{} syntax in our calc() function in this example. This is a use case of a concept called variable interpolation. Most languages have some form of this.

In the case of Sass, we use that syntax mostly when inside of a CSS function. In this case, Sass sees the calc() function and intends to compile the entire thing as one string to your CSS. The #{} syntax causes Sass to pause its compile and render the value into that string instead.

Step 2: Identify and refactor repeated code with @extends

In our example, we have two absolutely positioned pseudo-elements. These come with four properties that are identical: content, display, position and z-index.

We’ll use Sass’s @extend method to refactor this into a concise bit of compiled CSS.

Side Note: Why use @extend instead of creating a mixin and using @include here? @extend will create one rule set in CSS for multiple selectors; @include will insert the same rule set into the compiled CSS. Extending in Sass is a great way to reduce complexity and size of compiled CSS. Here are the docs on extending.

We’ll start by creating a “dummy” selector for our properties.

%pseudo-properties {
    content: "";  
    display: block;  
    position: absolute;
    z-index: 0;
}
Enter fullscreen mode Exit fullscreen mode

Note that % in there. That’s not standard CSS. We use that so that we don’t generate the CSS until it’s called. This keeps selector bloat down a little bit.

We can then reference that fake selector with the @extend method on our pseudo elements.

.article-promo::before {  
   @extend %pseudo-properties;
    ...
}

.article-promo::after {  
   @extend %pseudo-properties;
    ...
}
Enter fullscreen mode Exit fullscreen mode

The compiled CSS will look like this:

.article-promo::before, .article-promo::after {
    content: "";
    display: block;
    position: absolute;
    z-index: 0;
}
Enter fullscreen mode Exit fullscreen mode

The other code in your definition block for ::before or ::after will be compiled into its own selector later. You can keep your code together this way and not worry about bloat.

Step 3: Nest your selectors for easier abstraction

We can use Sass’s nesting abilities to clean up our code a little.

This will also help as we extend the functionality to any other selector than our current one.

.article-promo {
    position: relative;
    padding: $border-size * 2;
    > * {
        z-index: 100;
        position: relative;
    }
    &::before {
        @extend %pseudo-properties;
        background-color: $original-background-color;
        top: $gradient-size;
        left: $gradient-size;
        width: calc(100% - #{$gradient-border-size * 2});
        height: calc(100% - #{$gradient-border-size * 2});
    }
    &::after {
        @extend %pseudo-properties;
        background-image: linear-gradient($gradient-direction, $gradient-start-color, $gradient-end-color);
        top: 0;
        left: 0;
        width: 100%;
        height: 100%;
        mix-blend-mode: screen;
    }
} 
Enter fullscreen mode Exit fullscreen mode

Step 4: Move border functionality into a mixin

Here’s the big move. We’ll take everything that we’ve written inside our main selector and move it into an @mixin declaration.

We don’t need the main selector because that’s where we’ll apply our mixin. We don’t need the variables, because they will be arguments in our mixin.

@mixin gradient-border() {
    position: relative;
    padding: $border-size * 2;
    > * {
        z-index: 100;
        position: relative;
    }
    &::before {
        @extend %pseudo-properties;
        background-color: $original-background-color;
        top: $gradient-size;
        left: $gradient-size;
        width: calc(100% - #{$gradient-border-size * 2});
        height: calc(100% - #{$gradient-border-size * 2});
    }
    &::after {
        @extend %pseudo-properties;
        background-image: linear-gradient($gradient-direction, $gradient-start-color, $gradient-end-color);
        top: 0;
        left: 0;
        width: 100%;
        height: 100%;
        mix-blend-mode: screen;
    }
}
Enter fullscreen mode Exit fullscreen mode

Just like in a function definition in JavaScript, we’ll pass our variables into the parentheses.

You can even specify default values. In my case, I’m keeping a consistent border with small tweaks, so I opted for default values.

@mixin gradient-border($border-size: 10px, $original-background-color: white, $gradient-start-color: #eaee44, $gradient-end-color: #33d0ff, $gradient-direction: 120deg) {
    ...
}
Enter fullscreen mode Exit fullscreen mode

Step 5: Declare the mixin in the selectors you need it

Finally, we have a mixin that we can use. We’ll use the Sass @include method. Here are a few examples.

.article-promo {  
   @include gradient-border; // Gives all defaults
}
.big-border {
    @include gradient-border(50px); // If declared in order, you don't have to label your arguments
}
.red-gradient {
    @include gradient-border($gradient-start-color: red, $gradient-end-color: darkred);
}

.vertical-gradient {
    @include gradient-border($gradient-direction: to bottom);
}
Enter fullscreen mode Exit fullscreen mode

Using this for other examples

This direction will work for any CSS you want to refactor. Sass gives us a lot of power and flexibility. It can either be something that becomes easy to maintain or a nightmare of redeclared variables and nesting.

Creating reusable components is at the heart of any maintanence strategy. Follow this path and you can create components throughout any project.

  1. Identify reusable components
  2. Find pieces that need to be changed regularly
  3. Nest selectors for simplicity
  4. Use @extend to keep your compiled CSS smaller

What component will you start with?

Top comments (0)