DEV Community

DaohuaPackaging
DaohuaPackaging

Posted on

Print Specs for Custom Packaging: A Practical Checklist for Ecommerce Builders

Print Specs for Custom Packaging: A Practical Checklist

If you build or run an ecommerce store, packaging is the one physical interface your software business ships. Getting the print file wrong is expensive: the box is already produced before you see the mistake.

This checklist summarises what we check at DaohuaPackaging before any custom box goes to production.

1. Dieline first, artwork second

A dieline is the flat, unfolded outline of your box. Artwork must be placed on the manufacturer's dieline for your exact size — not a generic template downloaded at a similar size. A 2mm size change moves every fold.

2. Bleed, safe zone, resolution

  • Add bleed beyond trim lines so edge-to-edge colour has no white sliver
  • Keep text and logos inside the safe zone, away from folds and glue flaps
  • Supply print artwork at production resolution, in CMYK for print — screen RGB will shift Our longer reference: Print Specs and Tolerances (2026) https://www.daohuapackaging.com/blog/print-specs-and-tolerances-2026/

3. Material is a spec, not a vibe

4. Finishes change the file

Spot UV, foil, embossing and debossing each need their own layer/mask in the artwork file. Definitions: packaging glossary https://www.daohuapackaging.com/blog/packaging-glossary/

5. Proof before production

Always approve a digital proof, and for a first run, a physical sample kit beats a screen. Low minimums (we start at 100 units) exist so a first order can be a real test: low-minimum custom packaging guide https://www.daohuapackaging.com/blog/low-minimum-custom-packaging-small-runs/


DaohuaPackaging — Shenzhen custom packaging manufacturer since 2014. Custom printed boxes, mailers, rigid boxes and mylar bags from 100 units: https://www.daohuapackaging.com/

Top comments (0)