How to setup Belkin Range Extender after reset?

Before you start the setup process make sure your extender is ON and you have your wireless network name (SSID) with Wi-Fi password. Now if you this information then follow the below-given steps for setting up your Belkin range Extender wirelessly-

1. Plug in your range extender in power inlet.

   1. Use Wi-Fi capable device, locate and connect in Belkin.setup network.

2. Once you are connected to Belkin.setup then move to next step.

3. Now launch the web browser and type http://Belkin.range or use http://192.168.206.1 to access the range extender’s web based set up page.

4. Once you are connected open the Get started button and click on it.

   1. It will start searching for your SSID.

5. Now select the wireless network and click on NEXT button.

6. Once you are connected then enter your network password and click on ‘next’

7. Select the network based on your usability and repeat the step 8

8. Now select the network which you want to extend.

9. Tap on create extended network button and proceed further Configuration is complete for your Belkin Range extender and you are ready to go.

Source: https://techvaidya.com/setup-belkin-range-extender/