DEV Community

Cover image for Connecting Two Routers Within One Network: Boosting Wi-Fi, Shared Resources
Michael Mirosnichenko
Michael Mirosnichenko

Posted on

Connecting Two Routers Within One Network: Boosting Wi-Fi, Shared Resources

Read this article to find out how to connect two or more routers to one network, how to boost your Wi-Fi network signal or create one more access point within the existing network. We will consider two ways of doing it – with a cable or Wi-Fi connection.

Why Would You Combine Several Routers Into One Network?

In some situations, one router may be insufficient to build a network or provide high-quality Wi-Fi coverage. It means that it may be unable to provide the desired Wi-Fi coverage area or may not have the number of ports required for the devices that are connected to such network. Some rooms or premises may appear to be beyond the range of your router’s Wi-Fi signal. This situation is well-known to people who dealt with the task of building a Wi-Fi network in a large house, apartment or an office consisting of many rooms. If it happens, additional equipment has to be installed to extend the network to the desired coverage. And it’s not that difficult as it may seem.

There are several ways of doing it which we are going to discuss in this article:

  • The first variant is connecting two or more routers with a cable. You will have to lay the cable from one router to the other(s). Doing it is not always convenient, but it is the most stable and reliable way to get them connected. If you want a steadily operating network with high speed for a number of devices, the routers should use cable connection.
  • The second variant is connecting the routers by Wi-Fi. In this case, the bridge connection (WDS) is used, or the repeater mode. In fact, they are the same, but these settings are implemented differently in routers by different manufacturers.

Image description

So, here is the starting point. We have the main router connected to the Internet, and it broadcasts a Wi-Fi network. We need to install one more router, for example, in another room or on another floor. This second router will kind of boost the Wi-Fi network provided by the main router and help to extend the same network so that it covers more distant premises.

The second router can be connected to the main router by cable or Wi-Fi.

Let’s have a closer look at both connection methods.

How to Connect Routers by Wi-Fi?

Most often, routers are connected by Wi-Fi, and it seems natural as it spares you the efforts for laying cables and drilling holes through the walls.

In my case, the main router is TP-link TL-WR841N. It broadcasts a Wi-Fi network with the name hetmansoftware.

Image description

Please bear in mind that the router we are going to connect to in the bridge mode should be configured already. That is, the Internet connection should be up and running, with the Wi-Fi network being broadcast.

There is a special article on how to configure a router and a detailed video guide to help you find your way through the process. You are welcome to view these materials for better understanding.

Image description

Before you move on to configure the second router, it is necessary to change the settings of the main router’s wireless network so that the channel for this network will be static instead of automatic.

For example, if your main router is another TP-Link, you can change the channel in the settings, by visiting the Wireless tab. In the field Channel specify a static channel. For example: 1, or 9, anything. Save the settings.

Image description

Now that the static channel has been set, you can exit the main router’s settings.

Let’s configure the router that will operate in the WDS mode. In my case, the specific model being used is TР-Link Archer C20. Go to the router settings.

Image description
For starters, you need to change the IP address of the second router. You have to avoid the situation of having two devices with the same IP addresses within one network. For example, if the main router has the IP address 192.168.0.1, and the other router also has the address 192.168.0.1, the two addresses will be in conflict. Go to the tab Network / LAN. In the field IP address change the last digit – say, put 2 instead of 1. Or, as in my case, change it from 192.168.1.1 to 192.168.0.2. Save the modified settings.

Image description

Why should you do it this way? You need to know the IP address of the main router which you are going to connect to. If it has the address 192.168.1.1, then the address for the router which you want to connect by WDS should be changed to 192.168.1.2. If the main router has the address 192.168.0.1, you should assign the other router the following address: 192.168.0.2. It is important to have both routers in one subnetwork.

Go to the settings again, but this time the IP address will be different – 192.168.0.2. The one you have specified before.

Image description

Go to the tab Wireless / Basic Settings. In the field Wireless Network Name you can specify the name of the second wireless network. In the field Channel, make sure you give the same channel that you have specified in the settings of the main router. In my case, the channel is 9.

Image description

Now check the box next to Enable WDS, and click on Scan.

Image description

From the list, select the network that your router will get its Internet connection from. Click on the Connect link next to the network you have chosen.

Image description

Now the only thing left to do is give the password to the main network in the Password field. Type it and click on the Save button.

Image description

After rebooting, go to the second router’s settings again. While you are in the main page (the Status tab) look at the Wireless section. It should say Enabled in the line WDS Status. It means that the second router has already connected to the main router, and now it is supposed to broadcast Wi-Fi.

Image description

However, the Internet connection will be available by Wi-Fi only, and if you connect devices to the router (operating in the WDS mode) with a cable, they will not be able to go online.

To set up this function properly, you should disable DHCP server for the router which has the WDS bridge configured – that is, for the router which is the secondary one in my case. It is also necessary to have its local IP address in the same subnetwork where the primary (main) router belongs to.

That is why you should enter the DHCP menu of the secondary router and disable this function.

Image description

This is the last step in getting two routers connected by Wi-Fi.

Find the right location to place the second router there so that it falls within the effective range of the main router. Set the desired name for the wireless network and a password. We have already described this step in detail in our article about configuring Wi-Fi mode for a router.

How to Build a Network of Several Routers with a Cable Connection?

There are two ways to connect several routers into one network with a cable. They are as follows:

Top comments (0)