Hello Andrea,
i worked through your tutorial up to step 3, it also works with test in the browser.
but from step 4 enable authentication for jitsi, which I have processed according to your instructions, no login window appears when logging into a room. and the error message "something went wrong" and restart the page as a continuous loop
do you have any idea what could be the fault here?
installed at Hetzner with ubuntu 20.04.
I also tried this step with:
On NAT
Edit / check your videobridge SIP config file /etc/jitsi/videobridge/sip-communicator.properties file
Add this lines at the end:
org.ice4j.ice.harvest.NAT_HARVESTER_LOCAL_ADDRESS = xxx.xxx.xxx.xxx
org.ice4j.ice.harvest.NAT_HARVESTER_PUBLIC_ADDRESS = xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx your internal and external P address
orig source: github.com/jitsi/jitsi-meet/blob/m... 129
3., Edit / check your videobridge config file / etc / jitsi / videobridge / config
modify your “JVB_HOST =” line
to
JVB_HOST = localhost
JVB_HOST = 127.0.0.1
but no success :-(
my old installation with ubuntu 18.04 based on the instructions from that time runs without any problems.
For further actions, you may consider blocking this person and/or reporting abuse
We're a place where coders share, stay up-to-date and grow their careers.
Date 26_12_2021
Hello Andrea,
i worked through your tutorial up to step 3, it also works with test in the browser.
but from step 4 enable authentication for jitsi, which I have processed according to your instructions, no login window appears when logging into a room. and the error message "something went wrong" and restart the page as a continuous loop
do you have any idea what could be the fault here?
installed at Hetzner with ubuntu 20.04.
I also tried this step with:
On NAT
Edit / check your videobridge SIP config file /etc/jitsi/videobridge/sip-communicator.properties file
Add this lines at the end:
org.ice4j.ice.harvest.NAT_HARVESTER_LOCAL_ADDRESS = xxx.xxx.xxx.xxx
org.ice4j.ice.harvest.NAT_HARVESTER_PUBLIC_ADDRESS = xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx your internal and external P address
orig source: github.com/jitsi/jitsi-meet/blob/m... 129
3., Edit / check your videobridge config file / etc / jitsi / videobridge / config
modify your “JVB_HOST =” line
to
JVB_HOST = localhost
JVB_HOST = 127.0.0.1
but no success :-(
my old installation with ubuntu 18.04 based on the instructions from that time runs without any problems.