These three programs use a while loop and basic arithmetic operators to perform different operations on a number.
1. Count the Number of Digits
This program counts how many digits are present in a given number.
Code:
no = 7654
count_of_digits = 0
while no > 0:
no = no // 10
count_of_digits += 1
else:
print(count_of_digits)
Explanation:
-
while no > 0: The loop runs until the number becomes 0. -
no // 10: Removes the last digit from the number. -
count_of_digits += 1: Increments the counter by 1 for every digit removed. - Once the number becomes 0, the loop ends and prints the total digit count.
Output:
4
2. Sum of Digits
This program extracts the last digit from a number and adds it to a new number.
Code:
no = 7654
count_of_digits = 0
sum_of_digits = 0
while no > 0:
sum_of_digits = (sum_of_digits * 10) + no % 10
no = no // 10
count_of_digits += 1
else:
print("Count of Digits", count_of_digits)
print("Sum of Digits is", sum_of_digits)
Explanation:
-
no % 10: Extracts the last digit of the number. -
sum_of_digits * 10: Shifts the existing number one position to the left. -
+ no % 10: Adds the extracted digit to the new number. -
no // 10: Removes the last digit from the original number. -
count_of_digits += 1: Counts each digit processed.
Note: Although the variable is named sum_of_digits, this code actually reverses the number. To calculate the actual sum of digits, use:
sum_of_digits = sum_of_digits + no % 10
Output of the original code:
Count of Digits 4
Sum of Digits is 4567
Output after the correction:
Sum of Digits is 22
3. Palindrome Number
A palindrome number is a number that remains the same when its digits are reversed.
For example: 12321, 121 and 1331.
Code:
no = 12321
no2 = no
count_of_digits = 0
reverse = 0
while no > 0:
reverse = (reverse * 10) + no % 10
no = no // 10
count_of_digits += 1
else:
print("Count of Digits", count_of_digits)
print("Reversed number is", reverse)
print("After loop", no)
if no2 == reverse:
print("Palindrome")
else:
print("Not Palindrome")
Explanation:
-
no2 = no: Stores the original number because the value ofnochanges inside the loop. -
no % 10: Extracts the last digit. -
reverse * 10: Shifts the existing reversed number one position to the left. -
+ no % 10: Adds the extracted digit to the reversed number. -
no // 10: Removes the last digit from the original number. -
count_of_digits += 1: Counts the number of digits. -
if no2 == reverse: Compares the original number with the reversed number.
If both numbers are equal, it is a palindrome. Otherwise, it is not.
Output:
Count of Digits 5
Reversed number is 12321
After loop 0
Palindrome
Top comments (0)