loading...

Your blog with Gatsby, AWS Amplify and a domain in Route53 in a few minutes.

jcastaneyra profile image jcastaneyra ・4 min read

A few weeks ago, I decided that I should re-do my blog; before creating my new stack for my blog, I researched my options. Currently, there are a lot of options, Jekyll (my old blog was in Jekyll), Hugo, Gatsby, Next.js, and a lot more.

And well, I decided at the end to go with Gatsby and AWS Amplify console; the main reasons were Amplify console and React, I just wanted to experiment a little bit more on these technologies.

What is Gatsby?

Gatsby is a framework for dynamic static website generation; it uses React for the front-end and GraphQL for the queries to bring all the dynamic content and has many plugins and starters to help you out to build very fast.

Requirements

For this small tutorial, there are some minimal requirements:

The setup

Go to the terminal and be sure you have node version 10. To install Gatsby in your system, run:

npm install -g gatsby-cli

As I mentioned, Gatsby has many plugins and starters that can help you build very fast; in this case, after reviewing different starters https://www.gatsbyjs.com/starters/?v=2 I decide to go with gatsby-starter-hello-friend. To use this starter and create a new project, just run:

gatsby new gatsby-blog https://github.com/panr/gatsby-starter-hello-friend

Change to the project directory just created

cd gatsby-blog

And run

gatsby develop

After running this command, in the terminal you get output about compilation and the URL in your localhost, you should see something like http://localhost:8000, grab this URL and open it in your browser.

Until this point, you have the basic setup using this starter.

Customize it

I like the starters because you can review which start you want the most and adapt to your needs, take it, and customize it; all this is done in a few minutes.

At this stage, I got Visual Studio Code and started to review the code and make some modifications.

  1. I did modify src/posts/hello.md and create my first post, it is straightforward.
  2. I updated src/pages/about.md and removed src/pages/showcase.md and src/posts/example.md, also I added some new images to src/images to be used in the modified page and post.
  3. I modified siteMetadata at gatsby-config.js file.

At this point, I restart gatsby develop command and now my blog with starter looks like this:

Gatsby blog

With this minimal version, I think it is ready to be published, but before doing this, push to GitHub.

Push changes and deploy

Now with this minimal version, you can push your code with:

git push

In my case, I have my code in https://github.com/jcastaneyra/gatsby-blog, as a disclaimer, at this moment some code in my repo is not the best, but for now this code works, it is still a work in progress.

Now, go to AWSAmplify console, go to "GET STARTED" below "Deploy":

Amplify console

Select GitHub and press "Continue":

Amplify select source

You would require to connect your GitHub account with AWS Amplify. Once GitHub and Amplify are connected, select the repo and the branch, press "Next".

Amplify select repo and branch

Write an App name, and press "Next".

Amplify write app name

Review Repository details and App settings and press "Save and deploy".

Amplify review and deploy

Amplify console will show the status of the deployment, you will see something like this.

Amplify deployment status

Get your domain in Route53

Go to Route53 console, and click below Domains on "Registered domains" press in the "Register Domain" button, you would search a domain you would like to buy, the console would guide you to fill all required info and buy the domain.

blog_gatsby_route53_buy_domain

Assign a domain to the

Once the app is deployed with Amplify console, you will see some extra steps. One of these steps is "Add a custom domain with a free SSL certificate", click on this step.

blog_gatsby_extra_steps

After clicking, you will see something like this.

blog_gatsby_add_domain

Press "Add domain", choose your domain and configure, press "Save".

blog_gatsby_configure_domain

Amplify console would assign and generate certificates through AWS Certificate Manager.

After a while, you would have a blog site with your domain, and AWS Amplify console would have a CI/CD (Continuous Integration/Continuous Deployment) for your application, with every commit to the branch associated with the app will trigger the deployment, and with SSL, excellent.

Wrap up

I know there are other services to deploy, such as Netlify and Vercel; I think I must test them in the future.

For now, AWS Amplify console works for me; maybe because I feel comfortable with AWS and have been working with it for several years, it is fast to bring my web sites online, including the domain and the SSL certificate.

Originally posted here

¿Quieres leer este artículo en español? Ve aquí

Posted on by:

jcastaneyra profile

jcastaneyra

@jcastaneyra

I am a Software Engineer that is still learning (Java, Javascript, React, Amplify, AWS)

Discussion

pic
Editor guide