DEV Community

wanglei
wanglei

Posted on

Installation of One Primary and One Standby Nodes

#opengauss

Procedure
1.Create a user group dbgroup.

groupadd dbgroup
Enter fullscreen mode Exit fullscreen mode

Create a common user omm in the dbgroup user group and set the password to Gauss_234.

useradd -g dbgroup omm
passwd Gauss_234
Enter fullscreen mode Exit fullscreen mode

3.Log in to the host where the package is installed as user omm and decompress the openGauss package to the installation directory (for example, /opt/software/openGauss).

tar -jxf openGauss-x.x.x-openEuler-64bit.tar.bz2 -C /opt/software/openGauss
Enter fullscreen mode Exit fullscreen mode

4.Assume that the decompressed package is stored in the /opt/software/openGauss directory. Go to the simpleInstall directory.

cd /opt/software/openGauss/simpleInstall
Enter fullscreen mode Exit fullscreen mode

5.Run the install.sh script to install openGauss.

sh install.sh  -w xxxx  --multinode
Enter fullscreen mode Exit fullscreen mode

In the preceding command, -w indicates the initial database password (specified by gs_initdb). This parameter is mandatory for security purposes.

6.After the installation is complete, check whether the process is normal by using ps and gs_ctl.

ps ux | grep gaussdb
gs_ctl query -D /opt/software/openGauss/data/master
Enter fullscreen mode Exit fullscreen mode

Run the ps command to display information similar to the following:

omm  4879 11.8 1.1 2082452 373832 pts/0  Sl   14:26   8:29 /opt/software/openGauss/bin/gaussdb -D /opt/software/openGauss/data/master -M primary

omm  5083  1.1  0.9 1819988 327200 pts/0  Sl   14:26   0:49 /opt/software/openGauss/bin/gaussdb -D /opt/software/openGauss/data/slave -M standby

omm      20377  0.0  0.0 119880  1216 pts/0    S+   15:37   0:00 grep --color=auto gaussdb
Enter fullscreen mode Exit fullscreen mode

Run the gs_ctl command to display information similar to the following:

gs_ctl query ,datadir is /opt/software/openGauss/data/master
HA state:
    local_role                     : Primary
    static_connections             : 1
    db_state                       : Normal
    detail_information             : Normal

Senders info:
    sender_pid                     : 5165
    local_role                     : Primary
    peer_role                      : Standby
    peer_state                     : Normal
    state                          : Streaming
    sender_sent_location           : 0/4005148
    sender_write_location          : 0/4005148
    sender_flush_location          : 0/4005148
    sender_replay_location         : 0/4005148
    receiver_received_location     : 0/4005148
    receiver_write_location        : 0/4005148
    receiver_flush_location        : 0/4005148
    receiver_replay_location       : 0/4005148
    sync_percent                   : 100%
    sync_state                     : Sync
    sync_priority                  : 1
    sync_most_available            : Off
    channel                        : 10.244.44.52:27001-->10.244.44.52:35912

 Receiver info:
No information
Enter fullscreen mode Exit fullscreen mode

Top comments (0)