DEV Community

LogrobotLM
LogrobotLM

Posted on Edited on AI-assisted

FANUC SRVO-062 (BZAL): an alarm code names a symptom, not a cause

FANUC alarm SRVO-062 is displayed as "SERVO BZAL alarm". It is commonly described as being about the backup of the Pulsecoder absolute position data, which involves the backup battery.

A code names a symptom, not a cause

An alarm code tells you what the controller reports. It does not tell you why. The same code can come from different causes, and the meaning and wording can differ between controller generations. Reading a code is the start of a diagnosis, not the end of it.

This post does not give a repair or intervention procedure. For the meaning of an alarm on your robot, and for any action on it (batteries, encoder, mastering or anything else), use the manufacturer's documentation for your exact robot and controller, and follow your site's safety rules.

Disclosure

We build LogrobotLM, a free tool that reads an ABB, KUKA or FANUC robot backup in your browser and explains alarms. The backup is read in the browser and is not uploaded to read it. We have a reference page for this code: https://logrobotlm.com/codes/fanuc/srvo-062 . It is our own page. It is not a substitute for the manufacturer's manual.

Top comments (0)