DEV Community

Cover image for 5 Tips for better NPM script organization
Marcel Cremer
Marcel Cremer

Posted on • Updated on • Originally published at marcel-cremer.de

5 Tips for better NPM script organization

Not too long ago, it was pretty normal to use grunt, gulp and other tools to organize building, testing and other tasks in JS-Projects. However, this required people to install, maintain and understand different build systems, structures and configurations.

NPM Scripts to the rescue!

Everyone who uses npm as their package manager already has a package.json and the ability, to run scripts from there. So what is more obvious, than using npm scripts for automated tasks around the project?

However, since the npm scripts is in no way opinionated about modeling complex build systems, the organisation and consistency of the scripts is in responsibility of the maintaining developer. And here are some tips on what you could do.

1. Consistent script names

If you start using NPM for several tasks, your script section might grow pretty fast. You might have for example scripts for unit testing, for integration testing, the same with coverage reports and also as watch-mode for development. If it grows organic, you might end up with something like

{
    "build": "...",
    "test": "...",
    "test-watch": "...",
    "integration-test": "...",
    "watch-integration-test": "...",
    "test-coverage": "...",
    "test-integration-coverage": "...",
    "build-prod": "..."
}
Enter fullscreen mode Exit fullscreen mode

Urks...

You might not notice it in the first place, but more often you'll misspell whatever you want to do, e.g. you write

npm run integration-test-watch 
Enter fullscreen mode Exit fullscreen mode

instead of

npm run watch-integration-test
Enter fullscreen mode Exit fullscreen mode

triggering the well known "Command not found"-Error.

So somewhen you get the idea to change it the other way around, and guess what? The next time you try it, you write it wrong again , because you don't have a system...yet :)

So what we need is some naming scheme, that is consistent in your own aesthetical point of view. For example, I use something like:

{
  "build": "...",
  "build:production": "...",
  "test": "...",
  "test:coverage": "...",
  "test:watch": "...",
  "test:integration": "...",
  "test:integration:coverage": "...",
  "test:integration:watch": "..."
}
Enter fullscreen mode Exit fullscreen mode

So I start off with what I want to do, followed by specifying it or calling additional behaviours. As the order always stays the same, I'm not so likely to misspell things.

Also I have some "internal" scripts, that are only used for DRY purposes inside of the package.json. Usually I let them start with a hashtag, so that people don't get the idea to use them directly. For example:

{
  "\#:copy:assets": "...",
  "\#:copy:configuration-templates": "...",
  "\#:generate:polyfills": "..."
}
Enter fullscreen mode Exit fullscreen mode

2. Performance

One thing people often don't care about is performance. If we think of unit tests, it's pretty obvious that every second counts. So if you press ctrl+s about 10 times a minute, and every testing cycle takes 3 seconds, you spend about half your time (10 * 3 = 30 seconds) waiting for your test results! Scary, isn't it?

If you're in a typescript environment, the code also needs to be compiled into javascript before the tests etc. can be executed. So take a minute upfront to think about your task execution, before wasting hours and hours with waiting.

  • Use modules like concurrently whenever you're able to execute tasks in parallel (e.g. having your typescript-compiler watch .ts files, and your tests watch the output .js-files).
  • Try to avoid that different tasks do the same (e.g. integration testing and unit testing both trigger the typescript compiler)
  • Make granular scripts for different tasks and chain them in convenience scripts
  • review your scripts from time to time to see, what bottlenecks you encounter

3. Platform independence

Because I primarily develop on windows (blame me if you want...), I really hate it when I want to contribute to some Open Source project, and the

npm run start 
Enter fullscreen mode Exit fullscreen mode

script fails because it's relying on some unix command. Try to use node-implementations whenever you can, to avoid platform specific code.

For Example:

  • Use rimraf instead of rm -rf
  • Use copyfiles instead of copying via OS commands
  • ... you get the idea ;)

Even worse is the usage of npm packages that rely on native OS calls, which need to be compiled with node-gyp before being usable.

If you don't believe me, have a look at stackoverflow on how many problems node-gyp creates, before you decide to use some native OS library to "asynchronously add 2 numbers" (or other curiousities like that)!

I know, some scenarios need native libraries and that's perfectly fine, but please think twice before adding them as a dependency. If the cause is for example performance, provide a "slow, platform-indepedent, nodejs"-way as default and add the "native call"-way as a peer dependency, so people can decide themselves, if the performance is worth the native module compilation.

Always prefer options over "might not be working for someone", because the persons you otherwise push away might have sent you an incredible pull request.

4. Additional parameters

Sometimes I see projects, that have the exact same script multiple times implemented, just to add different parameters. That is fine if you're providing convenience methods (e.g. serve to start a development webserver), but if you have a dozen of them, you might also think about people just parametrizing your scripts.

So instead of

{
  "start": "node server.js",
  "start:integration-port": "node server.js --port=4202",
  "start:https": "node server.js --https=true",
  "start:integration-port:https": "node server.js --port=4202 --https"
}
Enter fullscreen mode Exit fullscreen mode

you could also provide a single start command, and use -- to pass additional parameters to the script. That can be used like

npm run start
npm run start -- --port=4202
npm run start -- --https=true
npm run start -- --port=4202 --https=true
Enter fullscreen mode Exit fullscreen mode

5. NPX instead of single command scripts

Since NPM 5, NPM supports a tool called "NPX". What it basically does is, it executes a script from your dependencies as node executable.

For example instead of writing

node ./node_modules/typescript/bin/tsc
Enter fullscreen mode Exit fullscreen mode

you could write

npx tsc
Enter fullscreen mode Exit fullscreen mode

and would execute your local typescript compiler (more information here).

Sometimes I look into projects, that have 20 NPM scripts or something, and some of them are


{
// ...
"webpack": "webpack",
"tsc": "tsc",
// ...
}
Enter fullscreen mode Exit fullscreen mode

which are pretty useless. Use NPX and tighten your package.json even more.

Do you have some more tips? How do you structure your package.json?

Top comments (4)

Collapse
 
easyaspython profile image
Dane Hillard

Wonderful suggestions! Happy that it converges with a lot of what we've done, though I'd love to start looking at the capabilities of npx more closely πŸ˜„

Collapse
 
marcel_cremer profile image
Marcel Cremer

I'm happy that you liked it :-)

Collapse
 
thejaredwilcurt profile image
The Jared Wilcurt

npm is never capitalized officially.

  • npm, Inc. - When talking about the company
  • npm - When talking generically about the product
  • npmjs.com - When talking about the website
  • npm - When referencing code to be executed (such as npm install)
  • npx - For executable code (which is what it is used for most of the time).
  • npx - If referring to the product, such as "You can view the source code on the npx repo".

Important thing is just don't put it in all caps ever. Similar to typing "Macdonalds Big Mac", people will know what you are talking about, but it is better to use their official brand name, "McDonald's Big Mac". Unless intentionally misbranding is the point (Γ  la Banksy) people may dismiss your article as uninformed, unpolished, or unprofessional and skip it before giving it a chance.

Hope that helps.

Collapse
 
marcel_cremer profile image
Marcel Cremer

TBH, I personally don't use them. Most of the time when I remember that they exist and I "refactor" my scripts into using hooks, the package.json feels bloated afterwards (especially if the hooks just call other npm scripts).

If I see them in other projects, I sometimes like how they're used though.

Maybe you can give some pro / cons, why to use them?